[Nokia USB Flashing Generic]: Port opened OK!
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
[Nokia USB Flashing Generic]: Port opened OK!
Proceeding with Recovery Mode...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007400C192103032108
CMT_EM_ASIC_ID: 00001051
CMT_EM_ASIC_ID: 00001060
CMT_PUBLIC_ID: 9C4B0000FFFB3C40BAF1072263D4457253829FC0
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 3AB5DB70B45D23F1ADEEBB5734160706
CMT_BOOT_ROM_CRC: 2CAC45E2
CMT_SECURE_ROM_CRC: 3BC33C8B
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv21_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.14.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000131, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000131, ST, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
RAPUv21_XSR17_alg.fg, Type: Algorithm, Rev: 768.12.14.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: A3E0AA6F2F86410BA6D666BACF6186EEFBC82D28
APE Subsystem Not Found
NPC Backup stored in "9C4B0000FFFB3C40BAF1072263D4457253829FC0_09-06-2013_105955.NPC.CMT.crt"
[Nokia Asha 311 USB Phonet]: Port opened OK!
Set to Recovery Mode Finished
Storing Product Code...
Storing PSN...
Storing HWID...
Simlock Store not supported, not a PA_SL2 Phone
Trying to store WMDRM RPL...
Reading Keys...
Failed to read WMDRM Key
Reading Security Block...
Security block OK and saved to "RM-714_12345610654321_09-06-2013_110007.SecurityBlock.PM"
"9C4B0000FFFB3C40BAF1072263D4457253829FC0.C000612F" Exists, That is good...
Storing Additional Data...
Checking Superdongle Key...
Superdongle Store Problem -> Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking CMLA Key...
CMLA Key Store Problem -> Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Booting CMT...
[Nokia Asha 311 USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007400C192103032108
CMT_EM_ASIC_ID: 00001051
CMT_EM_ASIC_ID: 00001060
CMT_PUBLIC_ID: 9C4B0000FFFB3C40BAF1072263D4457253829FC0
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 3AB5DB70B45D23F1ADEEBB5734160706
CMT_BOOT_ROM_CRC: 2CAC45E2
CMT_SECURE_ROM_CRC: 3BC33C8B
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv21_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.14.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000131, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000131, ST, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
RAPUv21_XSR17_alg.fg, Type: Algorithm, Rev: 768.12.14.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: A3E0AA6F2F86410BA6D666BACF6186EEFBC82D28
APE Subsystem Not Found
Storing NPC...
Storing CCC...
Storing HWC...
CMT VARIANT Not Found
CMT PARTNERC Not Found
Restoring from Recovery Mode...
Restored from Recovery Mode OK
Restarting MCU...
RPL Saved OK
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm714__05.92.mcusw (CMT)...
Booting CMT...
[Nokia Asha 311 USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007400C192103032108
CMT_EM_ASIC_ID: 00001051
CMT_EM_ASIC_ID: 00001060
CMT_PUBLIC_ID: 9C4B0000FFFB3C40BAF1072263D4457253829FC0
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 3AB5DB70B45D23F1ADEEBB5734160706
CMT_BOOT_ROM_CRC: 2CAC45E2
CMT_SECURE_ROM_CRC: 3BC33C8B
CMT Ready!
rm714__05.92.mcusw, Type: Flash Image, Algo: BB5, XSR 1.6
Searching for BootCode: DualLine 32Bit
RAPUv21_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.14.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000131, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000131, ST, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
RAPUv21_XSR17_alg.fg, Type: Algorithm, Rev: 768.12.14.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: A3E0AA6F2F86410BA6D666BACF6186EEFBC82D28
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00040000-0x000403FF, ONENAND
EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, ONENAND
EraseArea[0,CMT]: 0x00140000-0x004BFFFF, ONENAND
EraseArea[0,CMT]: 0x004C0000-0x0073FFFF, ONENAND
EraseArea[0,CMT]: 0x00740000-0x0173FFFF, ONENAND
EraseArea[0,CMT]: 0x00160000-0x0017FFFF, ONENAND
EraseArea[0,CMT]: 0x03E40000-0x0447FFFF, ONENAND
EraseArea[0,CMT]: 0x0F080000-0x0F67FFFF, ONENAND
EraseArea[0,CMT]: 0x01740000-0x02ABFFFF, ONENAND
EraseArea[0,CMT]: 0x02AC0000-0x02F3FFFF, ONENAND
Erase Partition (CMT)
Erase Partition (CMT)
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 0.641s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT KEYS Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT MCUSW1 Certificate...
Writing CMT GENIO_INIT Certificate...
Writing CMT ISA+DYNSW Certificate...
Writing CMT ADA Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT ISA+EXTDRV Certificate...
Programming Status OK!
All blocks written OK! Time taken 5.94s
Flashing Speed: 54891.37 kBit/S
Processing rm714__05.92.mcusw (APE)...
Processing rm714__05.92.ppm_s (CMT)...
rm714__05.92.ppm_s, Type: Flash Image, Algo: BB5, XSR 1.6
PAPUBKEYS Hash for CMT: A3E0AA6F2F86410BA6D666BACF6186EEFBC82D28
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x02F40000-0x03E3FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.140s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 1.484s
Flashing Speed: 73740.61 kBit/S
Processing rm714__05.92.ppm_s (APE)...
Processing rm714__05.92.image_s_059F7Q5 (CMT)...
rm714__05.92.image_s_059F7Q5, Type: Flash Image, Algo: BB5, XSR 1.6
PAPUBKEYS Hash for CMT: A3E0AA6F2F86410BA6D666BACF6186EEFBC82D28
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x04480000-0x0F07FFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 2.406s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 11.328s
Flashing Speed: 61250.67 kBit/S
Processing rm714__05.92.image_s_059F7Q5 (APE)...
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia Asha 311 USB Phonet]: Port opened OK!
[Nokia Asha 311 USB Phonet]: Port opened OK!
[Nokia Asha 311 USB Phonet]: Port opened OK!
[Nokia Asha 311 USB Phonet]: Port opened OK!
[Nokia Asha 311 USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia Asha 311 USB Phonet]: Port opened OK!
MCU Version V 05.92
MCU Date 10-10-12
Product RM-714 (Nokia RM-714)
Manufacturer (c) Nokia
IMEI 12345610654321?
IMEI Spare 1A32541660452301
IMEI SV 1332541660452321F4000000
PPM V 05.92, 10-10-12, RM-714, (c) Nokia , S
CNT Content: s_059F7Q5, V 05.92, 10-10-12, RM-714, (c) Nokia
PSN 0
Product Code 059F7Q5
PSD 0000000000000000
LPSN 0
RETU 51
TAHVO 00
AHNE 21
RFIC |Alli_4.b.1
DSP MCL_5.70
LCD TPO
BT 19e2-4702E12
Failed to read info -> Failed to read SP info
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
مشكلة في فلاشة نوكيا 311
.gif)
رد مع اقتباس
المفضلات