قائمة الاعضاء المشار اليهم

صفحة 5 من 5 الأولىالأولى 12345
النتائج 41 إلى 48 من 48

الموضوع: تحديثات : موضوع متجدد تحديثات Octoplus JTAG v.1.4.9

  1. #41
    .:: نائب المدير العام ::.
    الصورة الرمزية LYON

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2008
    الدولة
    Sudan
    Phone
    I Phone 7
    المشاركات
    10,641
    الشَكر (المُعطى)
    19709
    الشَكر (المُستلَم)
    26812
    الإعجاب (المُعطى)
    2207
    الإعجاب (المُستلَم)
    2256
    غير معجبون (المُعطى)
    3
    غير معجبون (المُستلَم)
    3
    تم تذكيره فى
    8 مشاركة
    تمت الاشارة اليه فى
    2313 مواضيع
    معدل تقييم المستوى
    67197

    افتراضي رد: تحديثات : موضوع متجدد تحديثات Octoplus JTAG v1.7.8

    plus cap

    Octoplus JTAG Software v.1.7.8 is out!


    We have added boot repair via USB and small TP for LG D150, D157F, D160, D160F, D160G,
    which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!


    Also added repair via JTAG interface for Samsung SGH-T479B and ZTE V880G.


    Octoplus Box JTAG Software v.1.7.8 Release Notes


    Added support for the following models:


    - LG D150 - added Dead Boot/Device Repair via USB
    - LG D157F - added Dead Boot Repair via USB
    - LG D160 - added Dead Boot/Device Repair via USB
    - LG D160F - added Dead Boot Repair via USB
    - LG D160G - added Dead Boot Repair via USB
    - Samsung SGH-T479B - added Dead Boot/Device Repair
    - ZTE V880G - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
    All pinouts and Repair procedures are described in the manual ("Help" button in Software).




    To repair mentioned above devices via USB, please follow the next three steps:
    Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
    (do NOT use any USB hubs!)
    Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
    Drivers are in {Installation_Folder}\Driver\QHSUSB
    Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)





    Download Octoplus Box JTAG Software v.1.7.8
    Find out more at: Octoplus Box - flashing, software repair and unlocking of LG, Samsung, Sony Ericsson and other devices
    GEM-FLASH.com First Arabic Support For All Arabic Mobile FLASH Files
    منتدى عربي سبورت عربي جيم فلاش / هوستينج العرب

    يمكنك متابعتنا على الفيس بوك من خلال صفحة المتجر و صفحة المنتدى

  2. #42
    .: جيماوي متالق :.
    الصورة الرمزية DZ-Developer

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jun 2009
    الدولة
    الجزائر الغالية
    Sonork
    1615160
    Phone
    ِCondor M1 Plus
    المشاركات
    1,941
    الشَكر (المُعطى)
    1726
    الشَكر (المُستلَم)
    2315
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    8
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    1 مواضيع
    معدل تقييم المستوى
    89

    افتراضي Octoplus JTAG Software v.1.8.3

    plus cap
    Octoplus JTAG Software v.1.8.3 is out!

    We have added boot repair via USB and small TP for LG G3 D851, G2 Mini LTE-A D620, LG D620K, LG D620R
    and via JTAG for ViewSonic ViewPad 7 (VS13761).


    Octoplus Box JTAG Software v.1.8.3 Release Notes


    • Added support for the following models:

    - LG D851 - added Dead Boot / Device Repair via USB
    - LG D620 - added Dead Boot Repair via USB
    - LG D620K - added Dead Boot Repair via USB
    - LG D620R - added Dead Boot Repair via USB
    - ViewSonic ViewPad 7 (VS13761) - added Dead Boot / Device Repair via JTAG (thanks to Mr. Dr_Wolodya)
    • Uploaded new Full Flash and Repair files for ZTE MF100 (128MB) (thanks to Mr. Dr_Wolodya)
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software)



    To repair mentioned above devices via USB, please follow the next three steps:

    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)


    plus line



    plus line
    نحن لسنا الهوستينغ بل سنكون الأفضل

  3. #43
    من مؤسسي المنتدى
    الصورة الرمزية ELMASRY.7000

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jun 2007
    الدولة
    مصري مقيم بالأردن
    العمر
    55
    Phone
    Huawei mate-7
    المشاركات
    13,242
    الشَكر (المُعطى)
    22988
    الشَكر (المُستلَم)
    27788
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    5
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    1 مشاركة
    تمت الاشارة اليه فى
    40 مواضيع
    معدل تقييم المستوى
    726

    افتراضي تحديثات : موضوع متجدد تحديثات Octoplus JTAG v1.7.8

    Octoplus Box JTAG Software v.1.9.1 Release Notes

    • Added support for the following models:

    - LG E970 - added Dead Boot Repair via USB
    - LG H220 - added Dead Boot Repair via USB
    - Huawei G525-U00 - added Dead Boot / Device Repair via JTAG
    - HTC One M7 (PN07110) - added Dead Boot Repair via JTAG, Repair IMEI, Repair CID (thanks to Mr. mathew_di)
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software)

    More info and discussion are HERE
    ____________________________________
    WBR,
    Octoplus Box Team
    ( سيأتي على الناس سنوات خداعات ، يصدق فيها الكاذب ، و يكذب فيها الصادق ، و يؤتمن فيها الخائن ، و يخون الأمين ، و ينطق فيها الرويبضة. قيل: وما الرويبضة ؟ قال: الرجل التافه يتكلم في أمر العامة ) حديث صحيح
    الحروب والقتل والثورات والأمراض في كل مكان الله يهيىء الكرة الأرضية لحدث كبير جدا

    http://quran.ksu.edu.sa/index.php#aya=72_10&m=hafs&qaree=maher&trans=ar_mu


  4. #44
    .: جيماوي محترف :.
    الصورة الرمزية PYTHON

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jan 2014
    الدولة
    LIBYA
    العمر
    36
    Sonork
    qq:2157039171
    Phone
    HTC ONE X
    المشاركات
    2,201
    الشَكر (المُعطى)
    7318
    الشَكر (المُستلَم)
    2803
    الإعجاب (المُعطى)
    383
    الإعجاب (المُستلَم)
    112
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    647 مواضيع
    معدل تقييم المستوى
    228

    Post 🐙 Octoplus JTAG PRO Software v.1.0.9 is out! 🐙





    plus cap

    Octoplus JTAG PRO Software v.1.0.9 is out!

    We have added support for LG Optimus LTE, Samsung Galaxy S Plus, Samsung Galaxy Note 8.0 and Samsung Galaxy Tab 3 8.0


    Octoplus Box JTAG PRO Software v.1.0.9 Release Notes:
    :🐙Added support for the following models via eMMC

    • LG LU6200 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9001- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-N5100 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-T311- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

    🐙 Added automatic resume of read, write, erase from the moment of interruption (if connection with the phone was lost during the process, etc.)
    🐙 All pinouts and repair procedures described in the manual ("Help" button in the Software)
    اذا أردت اتقان شئ

    لا تخبر به أحد قبل انجازه

  5. #45
    .:VIP Moderator:.
    الصورة الرمزية ™MOHAMED

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jan 2015
    الدولة
    <::"SUDAN::">
    Phone
    Y9 2019
    المشاركات
    7,221
    الشَكر (المُعطى)
    8936
    الشَكر (المُستلَم)
    8481
    الإعجاب (المُعطى)
    1968
    الإعجاب (المُستلَم)
    1158
    غير معجبون (المُعطى)
    3
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    1119 مواضيع
    معدل تقييم المستوى
    5707

    افتراضي افتراضي 🐙 Octoplus JTAG PRO v.1.2.1 - MTK repair, deleted data recovery and many more!! 🐙

    تم دعم معالج MTK علي التحديث الجديد
    Octoplus JTAG PRO Software v.1.2.1 is out!


    With this Software update we are glad to present new advanced features and support of new devices.
    On your numerous requests, we have released feature of repairing devices, which are based on MediaTek CPUs using scatter!
    Also added new eMMC functionality - «Boot partition enable» and for Samsung eMMC flash chips - «Remove write protect» and «eMMC geometry edit».
    In addition, added support for new Samsung, LG, Lenovo, Alcatel and Oppo devices.


    Octoplus Box JTAG PRO Software v.1.2.1 Release Notes:ï؟½ï؟½ Added «Repair devices based on MediaTek CPU's using scatter» feature!
    With this feature you can repair different devices via eMMC, which are based on MediaTek CPUs.
    Old and new scatter formats are supported.

    To repair such devices, you should perform the next steps:


    I. If device eMMC is not damaged


    1. Solder the necessary eMMC wires
    2. Connect the device
    3. Go to «Factory Repair» tab in the Software
    4. Press «Repair devices based on MediaTek CPU's using scatter» button
    5. Select proper scatter and necessary files
    6. Press «Write partitions» button
    7. Device repair is done


    II. If device eMMC is damaged

    If eMMC chip is damaged, you can replace it to similar Samsung eMMC chip.
    You should have CID and know properties (Boot1, Boot2, RPMB partitions’ sizes) of eMMC, which you want to replace.



    1. Connect Samsung eMMC to Box (via soldering eMMC wires or via eMMC adapter)
    2. Press «eMMC geometry edit» button, enter necessary Boot1, Boot2, RPMB partitions’ sizes and set them
    3. Write proper CID of eMMC, which you want to replace
    4. Go to «Factory Repair» tab in the Software
    5. Press «Repair devices based on MediaTek CPU's using scatter» button
    6. Select proper scatter and necessary files
    7. Press «Write partitions» button
    8. After writing will be complete, replace device’s eMMC chip to programmed Samsung eMMC
    9. Assemble the device and power it on. Device repair is done


    ï؟½ï؟½ Added «Remove write protect» feature for Samsung eMMC flash chips
    ï؟½ï؟½ Added «eMMC geometry edit» feature for Samsung eMMC. With this option you can set Boot1, Boot2, RPMB partitions’ size for Samsung eMMC
    ï؟½ï؟½ Added «Boot partition enable» - you can set, whether the device is not boot enabled or select partition, that will be enabled for boot (partition1, partition2 or User area)
    ï؟½ï؟½ Added support for the following models via eMMC:

    • Samsung GT-I9060I - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G531H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG F460K, F460L, F460S - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (Thanks to Mr. Hoayeu105 aka AquaSta)
    • Alcatel One Touch 4030 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    • Lenovo P780 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    • Lenovo A390 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    • Lenovo S820 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    • Lenovo A1000F - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    • Oppo T29 - Read/Write/Erase, Easy Repair, Constructor for Repair Files


    ï؟½ï؟½ Added support for the following models via USB
    (note: these devices are already supported via USB in old Medusa Software, they are just revised and added to Medusa Pro Software):

    • LG D160 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D280N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D320N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D410 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files


    ï؟½ï؟½ Improved erase operation (now it is up to 200 times faster)
    ï؟½ï؟½ Fixed some issues with CID edit
    ï؟½ï؟½ New features and improvements in "Content Extractor":

    • added possibility of restoration of deleted data(files, folders)! To find deleted data, select «Show deleted data» option in «Content Extractor» window and parse (read) data from device or file. Note: unfortunately, not all deleted data can be undeleted.
    • fixed errors with searching and displaying data
    • improved cashing process for video-files (in «Search media» window)
    • added more criteria for inner media-files search
    • fixed issue with window's hanging after some device been connected
    • fixed some GUI problems


    ï؟½ï؟½ Box firmware has been updated! To update firmware, it is necessary to connect the Box and only then run the Software
    Please pay attention! As you may have noticed, there is a minor issue with early Medusa PRO boxes firmware update.
    Non-updatable boxes are covered with warranty and entitled for replacement by authorized resellers.
    It will be not possible to use new eMMC feature («eMMC geometry edit», «Boot partition enable», «Remove write protect») without updating Box firmware!
    ï؟½ï؟½ All pinouts and repair procedures described in the manual ("Help" button in the software)


    http://www.youtube.com/watch?v=F5ej4IlgB4Eplus lineDownload Octoplus JTAG PRO Software v.1.2.1


    Find out more at: www.octoplusbox.com












  6. #46
    .:VIP Moderator:.
    الصورة الرمزية ™MOHAMED

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jan 2015
    الدولة
    <::"SUDAN::">
    Phone
    Y9 2019
    المشاركات
    7,221
    الشَكر (المُعطى)
    8936
    الشَكر (المُستلَم)
    8481
    الإعجاب (المُعطى)
    1968
    الإعجاب (المُستلَم)
    1158
    غير معجبون (المُعطى)
    3
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    1119 مواضيع
    معدل تقييم المستوى
    5707

    افتراضي 🐙 Octoplus JTAG PRO v.1.2.6 is out! 🐙

    Octoplus JTAG PRO Software v.1.2.6 is out!

    We released support for "Qualcomm MSM8x26" cores, added eMMC write verification, added support via USB for LG H962, K420N, D290N and support for Samsung SM-J700H, LG D290N, Huawei G526-L11 via eMMC.

    Octoplus Box JTAG PRO Software v.1.2.6 Release Notes:
    🐙 Released support for "Qualcomm MSM8x26" cores (new USB loader added). Read/Write/Full Erase operations are supported.
    🐙 Added support for the following models via USB:

    • LG H962 - Read/Write/Erase Full, Easy Repair, Partition Manager, Constructor for Repair Files.
    • LG K420N - Read/Write/Erase Full, Easy Repair, Partition Manager, Constructor for Repair Files.
    • LG D290N - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files.
    • LG D380* - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files.
    🐙 Added support for the following models via eMMC:

    • LG D290N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    • Samsung SM-J700H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    • Huawei G526-L11 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    🐙 All pinouts and Repair procedures described in the manual ("Help" button in the software).
    * This device is already supported via USB in old Medusa Software, it is just revised and added to Medusa Pro Software.


    plus line

  7. #47
    VIP Member
    الصورة الرمزية HaSHaM

    الحالة
    غير متواجد
    تاريخ التسجيل
    Aug 2008
    الدولة
    YeMeN
    العمر
    41
    Phone
    iPhone 6s
    المشاركات
    4,337
    الشَكر (المُعطى)
    9181
    الشَكر (المُستلَم)
    6903
    الإعجاب (المُعطى)
    176
    الإعجاب (المُستلَم)
    530
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    504 مواضيع
    معدل تقييم المستوى
    1185

    افتراضي Octoplus JTAG PRO v.1.4.9 is out!

    Octoplus JTAG PRO v.1.4.9 is out! New models and features added!

    Added support for LG LS740 and Samsung SM-G800F via eMMC and support for Alcatel OT-5051D, Alcatel OT-5051X, Alcatel OT-5056E, Alcatel OT-6044D, Lenovo K33a48, Lenovo P1a42, Lenovo P2c72, Lenovo ZUK Z2 Z2131 and ZTE N939Sc via USB.

    Changes and improvements in Partition Manager were made.

    New Qualcomm USB loaders added.

    Uploaded new “Live logs” into the Support Area.

    Some adjustments and improvements were made.

    Octoplus JTAG PRO Software v.1.4.9 Release Notes:
    🐙 Added support for the following models via eMMC:

    • LG LS740 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G800F – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Added support for the following models via USB:

    • Alcatel OT-5051D – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Alcatel OT-5051X – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Alcatel OT-5056E – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Alcatel OT-6044D – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Lenovo K33a48 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Lenovo P1a42 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Lenovo P2c72 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Lenovo ZUK Z2 Z2131 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • ZTE N939Sc – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Added new Qualcomm USB loaders for the next devices (Read/Write/Full erase operations are supported):

    • Huawei - for MSM8936 and MSM8952
    • ZTE - for MSM8936, MSM8952, MSM8953, MSM8976, MSM8994 and MSM8996
    🐙 Improved procedures of sending USB loaders and connecting
    🐙 Changes and improvements in Partition Manager

    • "Open File" button allows you to open full flash file, red from phone (img file), select required partitions and write them to the phone, or select any file instead of partition in table, which will be written accordingly to partitions table; also you can select a file which contains only partitions table and then select files corresponding to each partition in table. If eMMC chip is not connected - read/write operations are not available
    • "Connect" button from now on connects target device, but doesn't read partitions table. It will change its state to "Read from device", what allows you to perform partitions search, parsing and further operations in designated window, if eMMC chip is connected properly
    • While eMMC chip is connected, "Save partitions" reads data from memory, "Write partitions" writes present partitions accordingly from image or files opened
    • You have to reconnect target device after each write operation to see the changes. "Disconnect" button added for this purpose
    • "Hex editor" allows to change data directly in memory or file opened, accordingly to selected target
    🐙 Some log changes were made.
    🐙 Uploaded new “Live logs” into the Support Area.
    🐙 All pinouts and Repair procedures are described in the manual ("Help" button in the software).
    plus line

    جيـم فــلاش = هوستينج العــرب

    اللهم إني أسألك علماً نافعاً ، ورزقاً طيباً ، وعملاً متقبلاً



  8. #48
    .:مشرف قسم الصيني :.
    اسم المحل
    YOUSIF SOFT
    الصورة الرمزية °°.."Y"S"F"GSM"..°°

    الحالة
    غير متواجد
    تاريخ التسجيل
    Feb 2016
    الدولة
    Republic of Sudan
    العمر
    41
    Phone
    TECNO L8 LITE
    المشاركات
    8,151
    الشَكر (المُعطى)
    4399
    الشَكر (المُستلَم)
    4776
    الإعجاب (المُعطى)
    10961
    الإعجاب (المُستلَم)
    1739
    غير معجبون (المُعطى)
    7
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    2487 مواضيع
    معدل تقييم المستوى
    15413

    افتراضي


    Dear friends!

    Christmas season is full of magic, gifts, carols and joyous moments. May your heart and home be filled with all of the joys the festive season brings.

    Wishing you a very Merry Christmas and a happy and prosperous New Year.



    Octoplus JTAG PRO v.1.5.1 is out! New models and features added!

    Added support for Samsung SM-J210F, Samsung SM-G386T, Samsung SM-G530T, LG M700TV, ASUS MeMO Pad FHD 10 (ME302KL), HTC One M9 (0PJA200), Motorola XT1723, ZTE Z667 via eMMC and support for Xiaomi Redmi Note 4X and Xiaomi Redmi 5A via USB.

    Uploaded new “Live logs” into the Support Area.

    Some adjustments and improvements were made.

    Octoplus JTAG PRO Software v.1.5.1 Release Notes:
    🐙 Added support for the following models via eMMC:

    • Samsung SM-J210F – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G386T – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G530T – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG M700TV – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Burini)
    • HTC One M9 (0PJA200) – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • ASUS MeMO Pad FHD 10 (ME302KL) – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. ZELEKXXX)
    • Motorola XT1723 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • ZTE Z667 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Added support for the following models via USB:

    • Xiaomi Redmi Note 4X – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Xiaomi Redmi 5A – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. ZELEKXXX)
    🐙 Added possibility of work with devices via “USB” interface without Medusa/Medusa Pro/Octoplus Box connected to PC (card should be connected).
    🐙 Some changes added to Partition Manager (added possibility to open and write “*.mpt” files).
    🐙 Improved procedure of USB loaders operation.
    🐙 Some adjustments and improvements were made.
    🐙 Uploaded new “Live logs” into the Support Area.
    🐙 All pinouts and Repair procedures are described in the manual ("Help" button in the software).
    plus line
    Find out more at: www.octoplusbox.com

    التعليم هو جواز سفرنا الى المستقبل لان الغد ملك لاولئك الذين يعدون له اليوم
    قُلْ إِنَّ صَلَاتِي وَنُسُكِي وَمَحْيَايَ وَمَمَاتِي لِلَّهِ رَبِّ الْعَالَمِينَ

صفحة 5 من 5 الأولىالأولى 12345

الكلمات الدلالية لهذا الموضوع

المفضلات

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •