قائمة الاعضاء المشار اليهم

النتائج 1 إلى 10 من 10

الموضوع: ___ ابديت جديد Nspro v5.0.0 beta ___

  1. #1
    .: جيماوي نشيط :.
    الصورة الرمزية saad elaraby

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jun 2007
    الدولة
    مصر
    المشاركات
    493
    الشَكر (المُعطى)
    3
    الشَكر (المُستلَم)
    154
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    26

    افتراضي ___ ابديت جديد Nspro v5.0.0 beta ___

    Nspro v5.0.0
    ______

    -Added B300, C500, E215, E251, P180, A517, B130, F400, F480, F490, L810, U800, U900 support.

    -Added support for new J600 versions

    -Improved qualcomm flashing protocol

    Introduction

    NsPro 5 delivers a new user experience by providing a brand new interface that makes you more productive. The new version is localized in several of the most used languages, brings a new help system, allows you to log all the operations you do, notifies you when an operation is done and delivers phone information and hints all the time.
    Below is a de******ion of the new NsPro features.

    Workflow

    The new interface brings a new 5 steps work flow design to ease your work especially when you must perform different commands on the same model, and even more when you have to perform the same command (such as unlock) on the same model.

    tutorial nspro

    The 5 work steps are:

    1. Select Model: you cannot do anything in NsPro until you select a model. Once a model is selected you can execute commands (unlock, flashing, etc.). At any step you can return to this page and change the model. The Change Model button on the left allows you to just directly to this step at any time.


    2. Select Command: at this step you can select a command to run (the same available in previous versions):
    • Read info: read locks, IMEI, BT address, etc.
    • Write IMEI: change the IMEI of the phone
    • Unlock: direct unlock of the phone
    • Lock: lock the phone on a network
    • Flashing: rewrite the software on the phone
    • Service Jobs: perform additional services on the phone
    3. Command Details: for most of the commands you have to provide additional options or parameters; for instance you must enter an IMEI to write on the phone, or paths to the files to write to the phone.


    4. Execute: you execute the command and get an indication of the progress and status of the operation; you can stop the operation at any time (some commands will not stop immediately). When the operation is done the Next button is enabled and you can navigate to the last step.


    5. Done: the command you executed is finished and now you can choose to do one of the following:
    • Execute the last operation with the same parameters; that means you don’t have to enter them again (IMEI, network ID, flash files, etc.) but directly re-run the command
    • Change the command parameters; allows you to first change the parameters of the last command and then execute it again;
    • Change the command, jumps to step 2 where you can select a new command;
    • Change the phone model; jumps to step 1 where you can select a new model.

    The current step is shown on the workflow bar:

    tutorial steps

    Previous steps are shown in light orange, current step in dark orange with an arrow on top and next steps are shown in black.

    Info area


    It is located on the lower left area of the main ******. It displays information on:
    • NsPro card: name and identifier
    • Selected phone model: name, picture, cable, battery and power
    If a phone model requires different cables for different operations (such as unlock and flash) the cable shown in this area is always the one you need for the current operation.



    One-click Access Area


    On the upper left area of the ****** are three buttons that offer quick access to:
    • Change Model: jump to the first workflow page to select a new model; this is disabled only when the a command is running;
    • Support Area: takes you to the NsPro support area where you can download firmware other files;
    • *** Search: when a model is selected it opens your default browser and searches for the current model on Google.


    Upper Toolbar

    The toolbar is displayed on the right upper area of the ****** and has the following buttons:

    tutorial toolbar



    • Settings: opens a new dialog where you can change different settings for the application.
    • Go to NsTeam forums: opens the NsTeam forum login page in your default browser.
    • Go to NsTeam page: opens NsTeam home page in your default browser.
    • Change language: opens a menu that allows you to change the current language.
    • About NsPro: opens a ****** that shows information about NsPro.
    • Help: opens a ****** that displays help on-the-fly related to the current workflow step.


    tutorial navigation

    These two buttons allow you to navigate back and forth throw the different pages specific to each workflow step. If an operation is not possible (for instance you cannot go forth with changing the IMEI until enter the IMEI) the button is disabled.


    Help ******

    Former NsPro assistant was replaced with a help ****** that is displayed right to the NsPro main ******, and always moves as you move the main ******. The same on-the fly help displayed in the former assistant is shown now in this ******.

    tutorial help

    When the help ****** is not opened the toolbar button for help is red. When the help ****** is opened that button is blue.
    You can choose to have this ****** opened by default when you start NsPro. You can change that from the application settings.
    Settings ******

    You can open this ****** with the Settings button from the toolbar. You can change settings for:
    • Logging: you can opt to log all the operations you do with all the details (phone model, command, command details, time). The log file is called NsPro.log and is located in the same folder with the application. You can view it both with Explorer (or any other similar application) and NsPro if you use the View Log button. You can delete this file at any time. This option is enabled by default.
    • Help: you can choose to open the help ****** when the application starts. This option is enabled by default.
    • Notifications: you can choose to be notified when an operation ends an NsPro is not on the focus (you work in another ******). This option is enabled by default.


    Notifications

    When an operation end and NsPro is not the ****** you are currently working in, if notifications are enabled, an ***** ****** is displayed on top of the taskbar. If you click on the **** it brings NsPro into focus. If you click the close button it simply closes without bringing NsPro into focus.

    tutorial notifications

    Changing Language

    NsPro 5 is the first localized version. The interface is available in English (which is the default language) and Spanish, Portuguese, and Romanian.
    Any help to add more languages is welcome.

    tutorial language

    The language button on the toolbar displays a flag corresponding to the currently selected language. If you click on this button a drop down menu is displayed and you can select a different language. The moment you change a new language all interface ****s are displayed in that language.
    When you change the language that language becomes the default language and is used until you change it again.

    When you start NsPro again the last selected language is used as default.


    New version is available on official NsTeam ***page: www.nsteam.org
    And on NsPro support area.
    Enjoy.



    التعديل الأخير تم بواسطة saad elaraby ; 01-10-2008 الساعة 10:26 PM
    العربي .. مركز تدريب وصيانة المحمول


  2. تاريخ التسجيل
    Always
    الدولة
    Advertising world
    المشاركات
    Many

  3. #2
    .: جيماوي رائع :.
    الصورة الرمزية bimen

    الحالة
    غير متواجد
    تاريخ التسجيل
    May 2007
    الدولة
    EGYPT
    العمر
    33
    Phone
    Galaxy Note 3
    المشاركات
    957
    الشَكر (المُعطى)
    394
    الشَكر (المُستلَم)
    390
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    35

    افتراضي Nspro v5.0.0 beta released:

    -Added B300, C500, E215, E251, P180, A517, B130, F400, F480, F490, L810, U800, U900 support.

    -Added support for new J600 versions

    -Improved qualcomm flashing protocol

    Introduction

    NsPro 5 delivers a new user experience by providing a brand new interface that makes you more productive. The new version is localized in several of the most used languages, brings a new help system, allows you to log all the operations you do, notifies you when an operation is done and delivers phone information and hints all the time.
    Below is a de******ion of the new NsPro features.

    Workflow

    The new interface brings a new 5 steps work flow design to ease your work especially when you must perform different commands on the same model, and even more when you have to perform the same command (such as unlock) on the same

    tutorialnsprowq3


    The 5 work steps are:

    1. Select Model: you cannot do anything in NsPro until you select a model. Once a model is selected you can execute commands (unlock, flashing, etc.). At any step you can return to this page and change the model. The Change Model button on the left allows you to just directly to this step at any time.

    2.Select Command: at this step you can select a command to run (the same available in previous versions):
    • Read info: read locks, IMEI, BT address, etc.
    • Write IMEI: change the IMEI of the phone
    • Unlock: direct unlock of the phone
    • Lock: lock the phone on a network
    • Flashing: rewrite the software on the phone
    • Service Jobs: perform additional services on the phone


    3. Command Details: for most of the commands you have to provide additional options or parameters; for instance you must enter an IMEI to write on the phone, or paths to the files to write to the phone.

    4.Execute: you execute the command and get an indication of the progress and status of the operation; you can stop the operation at any time (some commands will not stop immediately). When the operation is done the Next button is enabled and you can navigate to the last step.

    5.Done: the command you executed is finished and now you can choose to do one of the following:
    • Execute the last operation with the same parameters; that means you don’t have to enter them again (IMEI, network ID, flash files, etc.) but directly re-run the command
    • Change the command parameters; allows you to first change the parameters of the last command and then execute it again;
    • Change the command, jumps to step 2 where you can select a new command;
    • Change the phone model; jumps to step 1 where you can select a new model.



    The current step is shown on the workflow bar:

    76305833dm5

    Previous steps are shown in light orange, current step in dark orange with an arrow on top and next steps are shown in black.

    Info area

    It is located on the lower left area of the main ******. It displays information on:
    • NsPro card: name and identifier
    • Selected phone model: name, picture, cable, battery and power

    If a phone model requires different cables for different operations (such as unlock and flash) the cable shown in this area is always the one you need for the current operation.


    One-click Access Area

    On the upper left area of the ****** are three buttons that offer quick access to:
    • Change Model: jump to the first workflow page to select a new model; this is disabled only when the a command is running;
    • Support Area: takes you to the NsPro support area where you can download firmware other files;
    • *** Search: when a model is selected it opens your default browser and searches for the current model on Google.



    Upper Toolbar

    The toolbar is displayed on the right upper area of the ****** and has the following buttons:

    64675063us4


    • Settings: opens a new dialog where you can change different settings for the application.
    • Go to NsTeam forums: opens the NsTeam forum login page in your default browser.
    • Go to NsTeam page: opens NsTeam home page in your default browser.
    • Change language: opens a menu that allows you to change the current language.
    • About NsPro: opens a ****** that shows information about NsPro.
    • Help: opens a ****** that displays help on-the-fly related to the current workflow step.



    16306974rm8

    These two buttons allow you to navigate back and forth throw the different pages specific to each workflow step. If an operation is not possible (for instance you cannot go forth with changing the IMEI until enter the IMEI) the button is disabled.


    Help ******

    Former NsPro assistant was replaced with a help ****** that is displayed right to the NsPro main ******, and always moves as you move the main ******. The same on-the fly help displayed in the former assistant is shown now in this ******.

    79776196xt1

    When the help ****** is not opened the toolbar button for help is red. When the help ****** is opened that button is blue.
    You can choose to have this ****** opened by default when you start NsPro. You can change that from the application settings.
    Settings ******
    You can open this ****** with the Settings button from the toolbar. You can change settings for:
    • Logging: you can opt to log all the operations you do with all the details (phone model, command, command details, time). The log file is called NsPro.log and is located in the same folder with the application. You can view it both with Explorer (or any other similar application) and NsPro if you use the View Log button. You can delete this file at any time. This option is enabled by default.
    • Help: you can choose to open the help ****** when the application starts. This option is enabled by default.
    • Notifications: you can choose to be notified when an operation ends an NsPro is not on the focus (you work in another ******). This option is enabled by default.



    Notifications

    When an operation end and NsPro is not the ****** you are currently working in, if notifications are enabled, an ***** ****** is displayed on top of the taskbar. If you click on the **** it brings NsPro into focus. If you click the close button it simply closes without bringing NsPro into focus.

    86735426qw9

    Changing Language

    NsPro 5 is the first localized version. The interface is available in English (which is the default language) and Spanish, Portuguese, and Romanian.
    Any help to add more languages is welcome.

    28499090oq6

    The language button on the toolbar displays a flag corresponding to the currently selected language. If you click on this button a drop down menu is displayed and you can select a different language. The moment you change a new language all interface ****s are displayed in that language.
    When you change the language that language becomes the default language and is used until you change it again.


    When you start NsPro again the last selected language is used as default.


    DOWNLOAD

  4. #3
    عضو موقوف

    الحالة
    غير متواجد
    تاريخ التسجيل
    May 2007
    Phone
    nokia n76
    المشاركات
    8,747
    الشَكر (المُعطى)
    7728
    الشَكر (المُستلَم)
    10415
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    0

    افتراضي

    ألف شــــــــــــــــــــــــــــكر على المتابعة

  5. #4
    .:: المدير العام ::.
    الصورة الرمزية NasirNS

    الحالة
    غير متواجد
    تاريخ التسجيل
    May 2007
    الدولة
    Sudan
    العمر
    49
    Sonork
    158.1358
    Phone
    Nokia 6630
    المشاركات
    10,191
    الشَكر (المُعطى)
    15571
    الشَكر (المُستلَم)
    12370
    الإعجاب (المُعطى)
    2
    الإعجاب (المُستلَم)
    57
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    1 مشاركة
    تمت الاشارة اليه فى
    61 مواضيع
    معدل تقييم المستوى
    391

    افتراضي

    تم دمج الموضوعين لان الاخير بة رابط تحميل مباشر

    شكرا للاخوة على المتابعة
    (سبحان الله وبحمده .. سبحان الله العظيم)
    قال الله تعالى : {مَا يَلْفِظُ مِن قَوْلٍ إِلَّا لَدَيْهِ رَقِيبٌ عَتِيدٌ}
    اعتزر للجميع عن قلة متابعتى وذلك بسبب انشغالى بتطوير السبورت
    منتدى عربي سبورت عربي جيم فلاش / هوستينج العرب

  6. #5
    .: جيماوي نشيط :.
    الصورة الرمزية sbata-team

    الحالة
    غير متواجد
    تاريخ التسجيل
    Sep 2008
    الدولة
    morocco
    المشاركات
    491
    الشَكر (المُعطى)
    765
    الشَكر (المُستلَم)
    438
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    27

    افتراضي

    ألف شــــــــــــــــــــــــــــكر على المتابعة

  7. #6
    .: جيماوي مشارك :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    Feb 2008
    المشاركات
    80
    الشَكر (المُعطى)
    6
    الشَكر (المُستلَم)
    0
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    20

    افتراضي

    please help me for setup this new version oh secon

  8. #7
    عضو موقوف

    الحالة
    غير متواجد
    تاريخ التسجيل
    Sep 2007
    الدولة
    Syria
    العمر
    40
    المشاركات
    240
    الشَكر (المُعطى)
    0
    الشَكر (المُستلَم)
    14
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    0

    افتراضي

    إن إس برو 5.0.0
    Nspro - v5.0.0 beta
    =================================
    Added B300, C500, E215, E251, P180, A517, B130, F400, F480, F490, L810, U800, U900 support
    Added support for new J600 versions
    Improved qualcomm flashing protocol
    =================================
    [IMG]http://********************/000/NSPRO[1].gif[/IMG]

  9. #8
    .: جيماوي رائع :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    Aug 2007
    المشاركات
    605
    الشَكر (المُعطى)
    0
    الشَكر (المُستلَم)
    33
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    27

    افتراضي

    الف شكر الك اخى
    ربى يعطيك العافية

  10. #9
    .: جيماوي رائع :.
    الصورة الرمزية gti

    الحالة
    غير متواجد
    تاريخ التسجيل
    Apr 2008
    المشاركات
    858
    الشَكر (المُعطى)
    363
    الشَكر (المُستلَم)
    504
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    31

    افتراضي

    شكرا ابو عبدالله وتسلم ايديك
    اللهم اغفر له ولوالديه
    اللهم امين

  11. #10
    .: جيماوي نشيط :.
    الصورة الرمزية saad elaraby

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jun 2007
    الدولة
    مصر
    المشاركات
    493
    الشَكر (المُعطى)
    3
    الشَكر (المُستلَم)
    154
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    26

    افتراضي

    اقتباس المشاركة الأصلية كتبت بواسطة gti مشاهدة المشاركة
    شكرا ابو عبدالله وتسلم ايديك

    ______________________

    ازيك يااستاذ محمد
    واحشني والله
    ___________________________
    العربي .. مركز تدريب وصيانة المحمول

الكلمات الدلالية لهذا الموضوع

المفضلات

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •