قائمة الاعضاء المشار اليهم

النتائج 1 إلى 8 من 8

الموضوع: شرح طريقة عمل داونجرد لاجهزة sl3 وبدون مشاكل على الاروع Cyclone box

  1. #1
    صديق المنتدى
    الصورة الرمزية NAPOLI

    الحالة
    غير متواجد
    تاريخ التسجيل
    Nov 2008
    Sonork
    ورفعنا لك ذكرك
    المشاركات
    5,522
    الشَكر (المُعطى)
    15759
    الشَكر (المُستلَم)
    7886
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    1 مشاركة
    تمت الاشارة اليه فى
    2 مواضيع
    معدل تقييم المستوى
    142

    افتراضي شرح طريقة عمل داونجرد لاجهزة sl3 وبدون مشاكل على الاروع Cyclone box

    بسم الله الرحم الرحيم

    اخواني الموضوع هو اضافة لموضوع اخي

    MouAeD1989
    طريقة عمل داون جريد للاجهزة الحديثة C7-N8-C6.01-500-




    اردت توضيح الطريقة لتعم الفائدة
    والطريقة تقريبا مشابهة للطريقة التي شرحها الاخ مؤيد
    لكن لا تنطبق على اجهزة

    c7 n8 c6-01 x7 e7 500 ...... و باقي الفئة



    كما تعلمون اغلب الاعضاء بعتقدون بعدم امكانية عمل
    داونجرد لاجهزة sl3 الاببوكسات مفعلة لاداء العملية
    لكن على السيكلون سترون امكانية ذلك وبكل بساطة



    ليكن مثلا جهاز

    7230 rm-604



    صور عمليات الباكب والاريز .. الخ موضوعة ومشروحة في موضوع اخي مؤيد اللي بالرابط اعلاه

    على بركة الله نبدأ

    انفو قبل الدونجرد

    MCU Version V 10.81
    MCU Date 28-02-11
    Product RM-604 (Nokia 7230)
    Manufacturer (c) Nokia
    IMEI 356993048032524
    Mastercode 322072554
    IMEI Spare 3A65990384305202
    IMEI SV 3365990384305262F6000000
    PPM V 10.81, 28-02-11, RM-598, (c) Nokia , F
    CNT Content: f_0590231, V 10.81, 28-02-11, RM-598, (c) Nokia
    PSN 1168299AH
    Product Code 059B1W9
    Module Code 0204859
    Basic Product Code 059D6Z5
    PSD 0000000000000000
    LPSN 0
    RETU 40
    TAHVO 00
    AHNE 41
    HW 1001
    RFIC |Vapaus_6.5 | Mikki_1.1
    DSP SPR91_10.80c
    LCD SEIKO
    BT 1673-46038
    Simlock Server SIMLOCK SERVER
    Simlock Key 2440700000000000
    Simlock Profile 0000000000000000
    Simlock Key Cnt 0
    Simlock FBUS Cnt 0
    Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [1,2] State: OPENED Type: GID Data: FFFF
    Simlock [1,3] State: OPENED Type: GID Data: FFFF
    Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [2,2] State: OPENED Type: GID Data: FFFF
    Simlock [2,3] State: OPENED Type: GID Data: FFFF
    Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [3,2] State: OPENED Type: GID Data: FFFF
    Simlock [3,3] State: OPENED Type: GID Data: FFFF
    Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [4,2] State: OPENED Type: GID Data: FFFF
    Simlock [4,3] State: OPENED Type: GID Data: FFFF
    Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [5,2] State: OPENED Type: GID Data: FFFF
    Simlock [5,3] State: OPENED Type: GID Data: FFFF
    Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [6,2] State: OPENED Type: GID Data: FFFF
    Simlock [6,3] State: OPENED Type: GID Data: FFFF
    Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [7,2] State: OPENED Type: GID Data: FFFF
    Simlock [7,3] State: OPENED Type: GID Data: FFFF
    Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF


    اناليز قبل الدونجرد


    Started Phone Security Analysis...
    MCU Version V 10.81
    MCU Date 28-02-11
    Product RM-604 (Nokia 7230)
    Manufacturer (c) Nokia
    IMEI 356993048032524
    Mastercode 322072554
    Reading Security Block...
    Security block OK and saved to "RM-604_356993048032524_27082012_061105 ?.SecurityBlock.PM"
    Step 1 : Testing SIMLOCK
    SIMLOCK SEFLTEST PASSED OK!
    Step 2 : Testing SECURITY
    SECURITY SEFLTEST PASSED OK!
    Step 3 : Analyzing Security Block
    "11D0021684EE58401A3EF756688D7B20CC957458.C0000CC2" Exists, That is good...
    Checking SUPERDONGLE...
    SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
    Checking SIMLOCK...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Checking MCU&DSP TIMESTAMPS...
    MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
    Checking CMLA KEYS...
    CMLA KEYS FOUND AND CHECKSUM OK! PASSED!
    Checking ECC KEYS...
    ECC KEYS FOUND AND CHECKSUM OK! PASSED!
    Checking DIV KEYS...
    DIV KEYS FOUND AND CHECKSUM OK! PASSED!
    Analyze finished!

    الان نقوم بسحب باكب كامل للجهاز rpl + full pm
    الطريقة موضحة بالصور بموضوع اخي مؤيد
    وايضا نقوم بعمل read all certs

    بعد الانهاء نقوم بعمل full erase

    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600000001020C192102044100
    CMT_EM_ASIC_ID: 00001040
    CMT_EM_ASIC_ID: 00001030
    CMT_PUBLIC_ID: 11D0021684EE58401A3EF756688D7B20CC957458
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 7B045400E1752022F9EB80B0DEA9C65D
    CMT_BOOT_ROM_CRC: 67E82268
    CMT_SECURE_ROM_CRC: F29CEA60
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAP3Gv40_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.8.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    If software STUCK HERE with box TX LED lit, that means:
    1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
    2. Your cable is not TX2 Enabled!
    3. Transmission error occured, try again
    In either cases, you need to reconnect your box from USB.
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0098003000000131, Toshiba, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00980030 (Toshiba), Size: 128MBytes, VPP: Not Supported
    RAP3Gv40_XSR17_alg.fg, Type: Algorithm, Rev: 768.12.8.0, Algo: XSR 1.6
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 4431C834027BBA0D18A5ED745CAFA04BA679A74A
    APE Subsystem Not Found
    Flashbus Write baud set to 5.0Mbits
    Erasing flash chip...
    Started group flash erase
    EraseArea[0,CMT]: 0x00000000-0x07FFFFFF, ONENAND
    Waiting 640s for erasure finish...
    Erase taken 1.985s
    Restarting MCU...
    BB5 Full Erase Finished!

    نفلش الجهاز بالفرجن الاقل وليكن
    V 09.83

    Processing pre flash tasks...
    Pre flash tasks finished, continuing...
    Processing rm598__09.83.mcusw (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600000001020C192102044100
    CMT_EM_ASIC_ID: 00001040
    CMT_EM_ASIC_ID: 00001030
    CMT_PUBLIC_ID: 11D0021684EE58401A3EF756688D7B20CC957458
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 7B045400E1752022F9EB80B0DEA9C65D
    CMT_BOOT_ROM_CRC: 67E82268
    CMT_SECURE_ROM_CRC: F29CEA60
    CMT Ready!
    rm598__09.83.mcusw, Type: Flash Image, Algo: BB5, XSR 1.6
    Searching for BootCode: DualLine 32Bit
    RAP3Gv40_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.8.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    If software STUCK HERE with box TX LED lit, that means:
    1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
    2. Your cable is not TX2 Enabled!
    3. Transmission error occured, try again
    In either cases, you need to reconnect your box from USB.
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0xFFFFFFFF00000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0098003000000131, Toshiba, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00980030 (Toshiba), Size: 128MBytes, VPP: Not Supported
    RAP3Gv40_XSR17_alg.fg, Type: Algorithm, Rev: 768.12.8.0, Algo: XSR 1.6
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    Warning: PAPUBKEYS Hash Missing!
    Flashbus Write baud set to 5.0Mbits
    Sending Certificates...
    Certificates OK
    Partitioning...
    Partitioning OK
    Started group flash erase
    EraseArea[0,CMT]: 0x00020000-0x000203FF, ONENAND
    EraseArea[0,CMT]: 0x00060000-0x0009FFFF, ONENAND
    EraseArea[0,CMT]: 0x000A0000-0x0025FFFF, ONENAND
    EraseArea[0,CMT]: 0x003E0000-0x005DFFFF, ONENAND
    EraseArea[0,CMT]: 0x005E0000-0x010DFFFF, ONENAND
    EraseArea[0,CMT]: 0x01EC0000-0x01EDFFFF, ONENAND
    EraseArea[0,CMT]: 0x027C0000-0x02CBFFFF, ONENAND
    EraseArea[0,CMT]: 0x077C0000-0x07B3FFFF, ONENAND
    EraseArea[0,CMT]: 0x010E0000-0x01EBFFFF, ONENAND
    Erase Partition (CMT)
    Erase Partition (CMT)
    Erase Partition (CMT)
    Waiting 320s for erasure finish...
    Erase taken 2.218s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT ADA Certificate...
    Writing CMT KEYS Certificate...
    Writing CMT PRIMAPP Certificate...
    Writing CMT PASUBTOC Certificate...
    WARNING: CMT PAPUBKEYS Hash is Empty, writing first found PAPUBKEYS
    Writing CMT PAPUBKEYS Certificate...
    Writing CMT RAP3NAND Certificate...
    Writing CMT UPDAPP Certificate...
    Writing CMT DSP0 Certificate...
    Writing CMT MCUSW Certificate...
    Writing CMT MCUSW1 Certificate...
    Writing CMT GENIO_INIT Certificate...
    Writing CMT ISA+DYNSW Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 37.328s
    Flashing Speed: 6476.41 kBit/S
    Restarting MCU...
    Processing rm598__09.83.mcusw (APE)...
    Processing rm598__09.83.ppm_meaa (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600000001020C192102044100
    CMT_EM_ASIC_ID: 00001040
    CMT_EM_ASIC_ID: 00001030
    CMT_PUBLIC_ID: 11D0021684EE58401A3EF756688D7B20CC957458
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 7B045400E1752022F9EB80B0DEA9C65D
    CMT_BOOT_ROM_CRC: 67E82268
    CMT_SECURE_ROM_CRC: F29CEA60
    CMT Ready!
    rm598__09.83.ppm_meaa, Type: Flash Image, Algo: BB5, XSR 1.6
    Searching for BootCode: DualLine 32Bit
    RAP3Gv40_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.8.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    If software STUCK HERE with box TX LED lit, that means:
    1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
    2. Your cable is not TX2 Enabled!
    3. Transmission error occured, try again
    In either cases, you need to reconnect your box from USB.
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0098003000000131, Toshiba, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00980030 (Toshiba), Size: 128MBytes, VPP: Not Supported
    RAP3Gv40_XSR17_alg.fg, Type: Algorithm, Rev: 768.12.8.0, Algo: XSR 1.6
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 4431C834027BBA0D18A5ED745CAFA04BA679A74A
    Flashbus Write baud set to 5.0Mbits
    Partitioning...
    Partitioning OK
    Started group flash erase
    EraseArea[0,CMT]: 0x01EE0000-0x027BFFFF, ONENAND
    Waiting 320s for erasure finish...
    Erase taken 0.172s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Programming Status OK!
    All blocks written OK! Time taken 7.110s
    Flashing Speed: 6541.16 kBit/S
    Restarting MCU...
    Processing rm598__09.83.ppm_meaa (APE)...
    Processing rm598__09.83.image_meaa_0590626_006 (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600000001020C192102044100
    CMT_EM_ASIC_ID: 00001040
    CMT_EM_ASIC_ID: 00001030
    CMT_PUBLIC_ID: 11D0021684EE58401A3EF756688D7B20CC957458
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 7B045400E1752022F9EB80B0DEA9C65D
    CMT_BOOT_ROM_CRC: 67E82268
    CMT_SECURE_ROM_CRC: F29CEA60
    CMT Ready!
    rm598__09.83.image_meaa_0590626_006, Type: Flash Image, Algo: BB5, XSR 1.6
    Searching for BootCode: DualLine 32Bit
    RAP3Gv40_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.8.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    If software STUCK HERE with box TX LED lit, that means:
    1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
    2. Your cable is not TX2 Enabled!
    3. Transmission error occured, try again
    In either cases, you need to reconnect your box from USB.
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0098003000000131, Toshiba, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00980030 (Toshiba), Size: 128MBytes, VPP: Not Supported
    RAP3Gv40_XSR17_alg.fg, Type: Algorithm, Rev: 768.12.8.0, Algo: XSR 1.6
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 4431C834027BBA0D18A5ED745CAFA04BA679A74A
    Flashbus Write baud set to 5.0Mbits
    Partitioning...
    Partitioning OK
    Started group flash erase
    EraseArea[0,CMT]: 0x02CC0000-0x077BFFFF, ONENAND
    Erase Partition (CMT)
    Waiting 320s for erasure finish...
    Erase taken 2.469s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Programming Status OK!
    All blocks written OK! Time taken 17.203s
    Flashing Speed: 6458.49 kBit/S
    Restarting MCU...
    Processing rm598__09.83.image_meaa_0590626_006 (APE)...
    All images processed OK! Processing post flash tasks...
    Post flash tasks finished!
    Flashing successfully finished!

    هذا انفو بعد التفليش بالفرجن الاقل ونلاحظ الايمي والسيم لوك فيها تلف

    MCU Version V 09.83
    MCU Date 21-09-10
    Product RM-598 (Nokia 7230)
    Manufacturer (c) Nokia
    IMEI 12345610654321?
    IMEI Spare 1A32541660452301
    IMEI SV 1332541660452351F7000000
    PPM V 09.83, 21-09-10, RM-598, (c) Nokia , MEA
    CNT Content: meaa_0590626, V 09.83, 21-09-10, RM-604, (c) Nokia
    PSN 0
    PSD 0000000000000000
    LPSN 0
    RETU 40
    TAHVO 00
    AHNE 41
    RFIC |Vapaus_6.5 | Mikki_1.1
    DSP ICPR91_10w19_1
    LCD SEIKO
    BT 1673-46038
    Failed to read info -> Failed to read SP info

    الان لحل مشكلة الايمي والسيم لوك
    نقوم بكتابة rpl ثم pm المسحوب بالباكب


    Skipping RPL decryption...
    Parsing decrypted RPL...
    Processing FBUS Part...
    Writing Product Code...
    Writing PSN...
    Writing HWID...
    Writing Simlock...
    Handling as SL3 Simlock Data
    Handling as SIMLOCK1 Format
    Reading Security Block...
    Security block OK and saved to "RM-598_356993048032524_27082012_063755 ?.SecurityBlock.PM"
    15 Digits NCK Found
    Simlock ACCEPTED OK !
    Writing Superdongle key...
    Superdongle Key ACCEPTED OK !
    Writing CMLA key...
    CMLA Key ACCEPTED OK !
    Writing WMDRM PD Data...
    WMDRM PD Data ACCEPTED OK !
    Processing FLASHBUS Part...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600000001020C192102044100
    CMT_EM_ASIC_ID: 00001040
    CMT_EM_ASIC_ID: 00001030
    CMT_PUBLIC_ID: 11D0021684EE58401A3EF756688D7B20CC957458
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 7B045400E1752022F9EB80B0DEA9C65D
    CMT_BOOT_ROM_CRC: 67E82268
    CMT_SECURE_ROM_CRC: F29CEA60
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAP3Gv40_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.8.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    If software STUCK HERE with box TX LED lit, that means:
    1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
    2. Your cable is not TX2 Enabled!
    3. Transmission error occured, try again
    In either cases, you need to reconnect your box from USB.
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0098003000000131, Toshiba, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00980030 (Toshiba), Size: 128MBytes, VPP: Not Supported
    RAP3Gv40_XSR17_alg.fg, Type: Algorithm, Rev: 768.12.8.0, Algo: XSR 1.6
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 4431C834027BBA0D18A5ED745CAFA04BA679A74A
    APE Subsystem Not Found
    Flashbus Write baud set to 5.0Mbits
    CMT NPC Erased
    CMT NPC Written
    CMT HWC Erased
    CMT HWC Written
    CMT CCC Erased
    CMT CCC Written
    Restarting MCU...
    Write RPL Finished!


    الان كتابة pm اللي بالباكب

    [1,2] Written, Length: 10 bytes, Status: Not accepted, Code: 19
    [1,6] Written, Length: 10 bytes, Status: Not accepted, Code: 19
    [1,7] Written, Length: 214 bytes, Status: Not accepted, Code: 19
    [1,13] Written, Length: 10 bytes, Status: Not accepted, Code: 19
    [1,16] Written, Length: 208 bytes, Status: Not accepted, Code: 19
    [1,18] Written, Length: 208 bytes, Status: Not accepted, Code: 19
    [1,20] Written, Length: 208 bytes, Status: Not accepted, Code: 19
    [1,23] Written, Length: 4 bytes, Status: Not accepted, Code: 19
    [1,24] Written, Length: 84 bytes, Status: Not accepted, Code: 19
    [1,25] Written, Length: 24 bytes, Status: Not accepted, Code: 19
    [1,28] Written, Length: 10 bytes, Status: Not accepted, Code: 19
    [1,29] Written, Length: 10 bytes, Status: Not accepted, Code: 19
    [1,31] Written, Length: 208 bytes, Status: Not accepted, Code: 19
    [1,33] Written, Length: 36 bytes, Status: Not accepted, Code: 19
    [1,34] Written, Length: 376 bytes, Status: Not accepted, Code: 19
    [1,37] Written, Length: 4 bytes, Status: Not accepted, Code: 19
    [1,39] Written, Length: 36 bytes, Status: Not accepted, Code: 19
    [1,41] Written, Length: 182 bytes, Status: Not accepted, Code: 19
    [1,42] Written, Length: 4 bytes, Status: Not accepted, Code: 19
    [1,43] Written, Length: 36 bytes, Status: Not accepted, Code: 19
    [1,44] Written, Length: 182 bytes, Status: Not accepted, Code: 19
    [1,45] Written, Length: 182 bytes, Status: Not accepted, Code: 19
    [2,0] Written, Length: 2320 bytes, Status: OK
    [4,1] Written, Length: 800 bytes, Status: OK
    [4,3] Written, Length: 10 bytes, Status: OK
    [4,4] Written, Length: 8 bytes, Status: OK
    [4,5] Written, Length: 8 bytes, Status: OK
    [4,6] Written, Length: 8 bytes, Status: OK
    [4,9] Written, Length: 5 bytes, Status: OK
    [4,18] Written, Length: 80 bytes, Status: OK
    [4,19] Written, Length: 4 bytes, Status: OK
    [4,26] Written, Length: 132 bytes, Status: OK
    [4,28] Written, Length: 2 bytes, Status: OK
    [8,0] Written, Length: 2 bytes, Status: OK
    [8,1] Written, Length: 16 bytes, Status: OK
    [8,2] Written, Length: 16 bytes, Status: OK
    [8,3] Written, Length: 128 bytes, Status: OK
    [8,4] Written, Length: 128 bytes, Status: OK
    [8,8] Written, Length: 8 bytes, Status: OK
    [8,9] Written, Length: 8 bytes, Status: OK
    [8,10] Written, Length: 32 bytes, Status: OK
    [8,11] Written, Length: 4 bytes, Status: OK
    [8,12] Written, Length: 4 bytes, Status: OK
    [11,0] Written, Length: 4 bytes, Status: OK
    [11,1] Written, Length: 4 bytes, Status: OK
    [11,2] Written, Length: 4 bytes, Status: OK
    [11,3] Written, Length: 4 bytes, Status: OK
    [11,4] Written, Length: 241 bytes, Status: OK
    [12,0] Written, Length: 102 bytes, Status: OK
    [13,0] Written, Length: 1 bytes, Status: OK
    [13,1] Written, Length: 2 bytes, Status: OK
    [13,2] Written, Length: 1 bytes, Status: OK
    [13,3] Written, Length: 2 bytes, Status: OK
    [13,4] Written, Length: 1 bytes, Status: OK
    [13,5] Written, Length: 1 bytes, Status: OK
    [13,6] Written, Length: 1 bytes, Status: OK
    [13,7] Written, Length: 1 bytes, Status: OK
    [13,8] Written, Length: 2 bytes, Status: OK
    [13,9] Written, Length: 1 bytes, Status: OK
    [13,10] Written, Length: 1 bytes, Status: OK
    [13,11] Written, Length: 48 bytes, Status: OK
    [13,12] Written, Length: 4 bytes, Status: OK
    [13,13] Written, Length: 1 bytes, Status: OK
    [13,14] Written, Length: 1 bytes, Status: OK
    [13,15] Written, Length: 886 bytes, Status: OK
    [13,16] Written, Length: 2 bytes, Status: OK
    [13,17] Written, Length: 1 bytes, Status: OK
    [13,18] Written, Length: 1 bytes, Status: OK
    [13,19] Written, Length: 8 bytes, Status: OK
    [13,20] Written, Length: 1 bytes, Status: OK
    [13,21] Written, Length: 1 bytes, Status: OK
    [13,22] Written, Length: 1 bytes, Status: OK
    [13,23] Written, Length: 1 bytes, Status: OK
    [13,24] Written, Length: 1 bytes, Status: OK
    [13,25] Written, Length: 2 bytes, Status: OK
    [13,26] Written, Length: 1 bytes, Status: OK
    [13,27] Written, Length: 1 bytes, Status: OK
    [13,28] Written, Length: 1 bytes, Status: OK
    [13,29] Written, Length: 1 bytes, Status: OK
    [13,30] Written, Length: 1 bytes, Status: OK
    [13,31] Written, Length: 1 bytes, Status: OK
    [13,32] Written, Length: 1 bytes, Status: OK
    [13,33] Written, Length: 1 bytes, Status: OK
    [13,34] Written, Length: 1 bytes, Status: OK
    [13,35] Written, Length: 1 bytes, Status: OK
    [13,36] Written, Length: 1 bytes, Status: OK
    [13,37] Written, Length: 4 bytes, Status: OK
    [13,38] Written, Length: 1 bytes, Status: OK
    [13,39] Written, Length: 1 bytes, Status: OK
    [13,40] Written, Length: 1 bytes, Status: OK
    [13,41] Written, Length: 1 bytes, Status: OK
    [13,42] Written, Length: 4 bytes, Status: OK
    [13,43] Written, Length: 4 bytes, Status: OK
    [13,44] Written, Length: 1 bytes, Status: OK
    [13,45] Written, Length: 4 bytes, Status: OK
    [13,46] Written, Length: 4 bytes, Status: OK
    [13,47] Written, Length: 1 bytes, Status: OK
    [13,48] Written, Length: 4 bytes, Status: OK
    [13,49] Written, Length: 1 bytes, Status: OK
    [13,50] Written, Length: 1 bytes, Status: OK
    [13,51] Written, Length: 1 bytes, Status: OK
    [13,52] Written, Length: 2 bytes, Status: OK
    [13,53] Written, Length: 4 bytes, Status: OK
    [13,54] Written, Length: 4 bytes, Status: OK
    [13,55] Written, Length: 1 bytes, Status: OK
    [13,56] Written, Length: 1 bytes, Status: OK
    [13,57] Written, Length: 1 bytes, Status: OK
    [13,58] Written, Length: 2 bytes, Status: OK
    [13,59] Written, Length: 1 bytes, Status: OK
    [13,60] Written, Length: 4 bytes, Status: OK
    [13,61] Written, Length: 4 bytes, Status: OK
    [13,62] Written, Length: 1 bytes, Status: OK
    [13,63] Written, Length: 4 bytes, Status: OK
    [13,64] Written, Length: 4 bytes, Status: OK
    [13,65] Written, Length: 1 bytes, Status: OK
    [13,66] Written, Length: 4 bytes, Status: OK
    [13,67] Written, Length: 4 bytes, Status: OK
    [13,68] Written, Length: 1 bytes, Status: OK
    [13,69] Written, Length: 1 bytes, Status: OK
    [13,70] Written, Length: 1 bytes, Status: OK
    [13,71] Written, Length: 4 bytes, Status: OK
    [13,72] Written, Length: 4 bytes, Status: OK
    [13,73] Written, Length: 1 bytes, Status: OK
    [13,74] Written, Length: 4 bytes, Status: OK
    [13,75] Written, Length: 2 bytes, Status: OK
    [13,76] Written, Length: 2 bytes, Status: OK
    [13,77] Written, Length: 2 bytes, Status: OK
    [13,78] Written, Length: 1 bytes, Status: OK
    [13,79] Written, Length: 1 bytes, Status: OK
    [13,80] Written, Length: 1 bytes, Status: OK
    [13,81] Written, Length: 1 bytes, Status: OK
    [13,82] Written, Length: 1 bytes, Status: OK
    [13,83] Written, Length: 2 bytes, Status: OK
    [13,84] Written, Length: 1 bytes, Status: OK
    [13,85] Written, Length: 4 bytes, Status: OK
    [13,86] Written, Length: 4 bytes, Status: OK
    [13,87] Written, Length: 2 bytes, Status: OK
    [13,88] Written, Length: 1 bytes, Status: OK
    [13,89] Written, Length: 4 bytes, Status: OK
    [13,90] Written, Length: 4 bytes, Status: OK
    [13,91] Written, Length: 2 bytes, Status: OK
    [13,92] Written, Length: 1 bytes, Status: OK
    [13,93] Written, Length: 4 bytes, Status: OK
    [13,94] Written, Length: 4 bytes, Status: OK
    [13,95] Written, Length: 2 bytes, Status: OK
    [13,96] Written, Length: 1 bytes, Status: OK
    [13,97] Written, Length: 4 bytes, Status: OK
    [13,98] Written, Length: 4 bytes, Status: OK
    [13,99] Written, Length: 2 bytes, Status: OK
    [13,100] Written, Length: 4 bytes, Status: OK
    [13,101] Written, Length: 2 bytes, Status: OK
    [13,102] Written, Length: 1 bytes, Status: OK
    [13,103] Written, Length: 4 bytes, Status: OK
    [13,104] Written, Length: 4 bytes, Status: OK
    [13,105] Written, Length: 4 bytes, Status: OK
    [13,106] Written, Length: 4 bytes, Status: OK
    [13,107] Written, Length: 4 bytes, Status: OK
    [13,108] Written, Length: 2 bytes, Status: OK
    [13,109] Written, Length: 4 bytes, Status: OK
    [13,110] Written, Length: 4 bytes, Status: OK
    [13,111] Written, Length: 4 bytes, Status: OK
    [13,112] Written, Length: 2 bytes, Status: OK
    [13,113] Written, Length: 4 bytes, Status: OK
    [13,114] Written, Length: 4 bytes, Status: OK
    [13,115] Written, Length: 1 bytes, Status: OK
    [13,116] Written, Length: 1 bytes, Status: OK
    [13,117] Written, Length: 1 bytes, Status: OK
    [13,118] Written, Length: 4 bytes, Status: OK
    [13,119] Written, Length: 4 bytes, Status: OK
    [13,120] Written, Length: 1 bytes, Status: OK
    [13,121] Written, Length: 1 bytes, Status: OK
    [13,122] Written, Length: 1 bytes, Status: OK
    [13,123] Written, Length: 8 bytes, Status: OK
    [13,124] Written, Length: 1 bytes, Status: OK
    [13,125] Written, Length: 1 bytes, Status: OK
    [13,126] Written, Length: 1 bytes, Status: OK
    [13,127] Written, Length: 1 bytes, Status: OK
    [13,128] Written, Length: 1 bytes, Status: OK
    [13,129] Written, Length: 4 bytes, Status: OK
    [13,130] Written, Length: 4 bytes, Status: OK
    [13,131] Written, Length: 1 bytes, Status: OK
    [13,132] Written, Length: 1 bytes, Status: OK
    [13,133] Written, Length: 2 bytes, Status: OK
    [13,134] Written, Length: 1 bytes, Status: OK
    [13,135] Written, Length: 2 bytes, Status: OK
    [13,136] Written, Length: 1 bytes, Status: OK
    [13,137] Written, Length: 1 bytes, Status: OK
    [13,138] Written, Length: 4 bytes, Status: OK
    [13,139] Written, Length: 4 bytes, Status: OK
    [13,140] Written, Length: 1 bytes, Status: OK
    [13,141] Written, Length: 1 bytes, Status: OK
    [13,142] Written, Length: 1 bytes, Status: OK
    [13,143] Written, Length: 1 bytes, Status: OK
    [13,144] Written, Length: 4 bytes, Status: OK
    [13,145] Written, Length: 8 bytes, Status: OK
    [13,146] Written, Length: 4 bytes, Status: OK
    [13,147] Written, Length: 4 bytes, Status: OK
    [13,148] Written, Length: 1 bytes, Status: OK
    [13,149] Written, Length: 1 bytes, Status: OK
    [13,150] Written, Length: 1 bytes, Status: OK
    [13,151] Written, Length: 1 bytes, Status: OK
    [13,152] Written, Length: 1 bytes, Status: OK
    [13,153] Written, Length: 1 bytes, Status: OK
    [13,154] Written, Length: 1 bytes, Status: OK
    [13,155] Written, Length: 1 bytes, Status: OK
    [13,156] Written, Length: 1 bytes, Status: OK
    [13,157] Written, Length: 1 bytes, Status: OK
    [13,158] Written, Length: 1 bytes, Status: OK
    [13,159] Written, Length: 2 bytes, Status: OK
    [13,160] Written, Length: 2 bytes, Status: OK
    [13,161] Written, Length: 1 bytes, Status: OK
    [13,162] Written, Length: 1 bytes, Status: OK
    [13,163] Written, Length: 1 bytes, Status: OK
    [13,164] Written, Length: 1 bytes, Status: OK
    [13,165] Written, Length: 1 bytes, Status: OK
    [13,166] Written, Length: 1 bytes, Status: OK
    [13,167] Written, Length: 8 bytes, Status: OK
    [13,168] Written, Length: 4 bytes, Status: OK
    [13,169] Written, Length: 1 bytes, Status: OK
    [13,170] Written, Length: 1 bytes, Status: OK
    [13,171] Written, Length: 1 bytes, Status: OK
    [13,172] Written, Length: 1 bytes, Status: OK
    [13,173] Written, Length: 1 bytes, Status: OK
    [13,174] Written, Length: 1 bytes, Status: OK
    [13,175] Written, Length: 1 bytes, Status: OK
    [13,176] Written, Length: 1 bytes, Status: OK
    [13,177] Written, Length: 4 bytes, Status: OK
    [13,178] Written, Length: 2 bytes, Status: OK
    [13,179] Written, Length: 1 bytes, Status: OK
    [13,180] Written, Length: 1 bytes, Status: OK
    [13,181] Written, Length: 1 bytes, Status: OK
    [13,182] Written, Length: 1 bytes, Status: OK
    [13,183] Written, Length: 1 bytes, Status: OK
    [13,184] Written, Length: 1 bytes, Status: OK
    [13,185] Written, Length: 1 bytes, Status: OK
    [13,186] Written, Length: 1 bytes, Status: OK
    [13,187] Written, Length: 1 bytes, Status: OK
    [13,188] Written, Length: 1 bytes, Status: OK
    [13,189] Written, Length: 1 bytes, Status: OK
    [13,190] Written, Length: 4 bytes, Status: OK
    [13,191] Written, Length: 2 bytes, Status: OK
    [13,192] Written, Length: 1 bytes, Status: OK
    [13,193] Written, Length: 4 bytes, Status: OK
    [13,194] Written, Length: 1 bytes, Status: OK
    [13,195] Written, Length: 1 bytes, Status: OK
    [13,196] Written, Length: 10 bytes, Status: OK
    [31,4] Written, Length: 14 bytes, Status: OK
    [42,0] Written, Length: 2 bytes, Status: OK
    [42,1] Written, Length: 12 bytes, Status: OK
    [42,2] Written, Length: 36 bytes, Status: OK
    [42,3] Written, Length: 36 bytes, Status: OK
    [42,4] Written, Length: 36 bytes, Status: OK
    [42,5] Written, Length: 36 bytes, Status: OK
    [42,6] Written, Length: 36 bytes, Status: OK
    [42,7] Written, Length: 40 bytes, Status: OK
    [42,8] Written, Length: 40 bytes, Status: OK
    [42,9] Written, Length: 40 bytes, Status: OK
    [42,10] Written, Length: 40 bytes, Status: OK
    [42,11] Written, Length: 40 bytes, Status: OK
    [42,12] Written, Length: 40 bytes, Status: OK
    [42,13] Written, Length: 40 bytes, Status: OK
    [42,14] Written, Length: 40 bytes, Status: OK
    [42,15] Written, Length: 40 bytes, Status: OK
    [42,16] Written, Length: 40 bytes, Status: OK
    [42,17] Written, Length: 40 bytes, Status: OK
    [42,18] Written, Length: 40 bytes, Status: OK
    [42,19] Written, Length: 40 bytes, Status: OK
    [42,20] Written, Length: 40 bytes, Status: OK
    [42,21] Written, Length: 40 bytes, Status: OK
    [42,22] Written, Length: 40 bytes, Status: OK
    [42,23] Written, Length: 40 bytes, Status: OK
    [42,24] Written, Length: 40 bytes, Status: OK
    [42,25] Written, Length: 40 bytes, Status: OK
    [42,26] Written, Length: 40 bytes, Status: OK
    [50,0] Written, Length: 2 bytes, Status: OK
    [54,0] Written, Length: 2 bytes, Status: OK
    [88,0] Written, Length: 36 bytes, Status: OK
    [96,0] Written, Length: 2 bytes, Status: OK
    [107,0] Written, Length: 21 bytes, Status: OK
    [107,1] Written, Length: 89 bytes, Status: OK
    [107,2] Written, Length: 69 bytes, Status: OK
    [107,3] Written, Length: 70 bytes, Status: OK
    [107,25] Written, Length: 136 bytes, Status: OK
    [107,26] Written, Length: 12 bytes, Status: OK
    [116,0] Written, Length: 2 bytes, Status: OK
    [116,1] Written, Length: 12 bytes, Status: OK
    [116,2] Written, Length: 36 bytes, Status: OK
    [116,3] Written, Length: 36 bytes, Status: OK
    [116,4] Written, Length: 36 bytes, Status: OK
    [116,5] Written, Length: 36 bytes, Status: OK
    [116,6] Written, Length: 36 bytes, Status: OK
    [116,7] Written, Length: 40 bytes, Status: OK
    [116,8] Written, Length: 40 bytes, Status: OK
    [116,9] Written, Length: 40 bytes, Status: OK
    [116,10] Written, Length: 40 bytes, Status: OK
    [116,11] Written, Length: 40 bytes, Status: OK
    [116,12] Written, Length: 40 bytes, Status: OK
    [116,13] Written, Length: 40 bytes, Status: OK
    [116,14] Written, Length: 40 bytes, Status: OK
    [116,15] Written, Length: 40 bytes, Status: OK
    [116,16] Written, Length: 40 bytes, Status: OK
    [120,0] Written, Length: 944 bytes, Status: OK
    [120,1] Written, Length: 160 bytes, Status: OK
    [120,2] Written, Length: 130 bytes, Status: OK
    [120,3] Written, Length: 112 bytes, Status: OK
    [193,2] Written, Length: 8 bytes, Status: OK
    [193,3] Written, Length: 32 bytes, Status: OK
    [193,4] Written, Length: 32 bytes, Status: OK
    [193,9] Written, Length: 64 bytes, Status: OK
    [218,0] Written, Length: 2 bytes, Status: OK
    [238,1] Written, Length: 1 bytes, Status: OK
    [301,0] Written, Length: 2 bytes, Status: OK
    [301,1] Written, Length: 12 bytes, Status: OK
    [301,2] Written, Length: 36 bytes, Status: OK
    [301,3] Written, Length: 36 bytes, Status: OK
    [301,4] Written, Length: 36 bytes, Status: OK
    [301,5] Written, Length: 36 bytes, Status: OK
    [301,6] Written, Length: 36 bytes, Status: OK
    [301,7] Written, Length: 40 bytes, Status: OK
    [301,8] Written, Length: 40 bytes, Status: OK
    [301,9] Written, Length: 40 bytes, Status: OK
    [301,10] Written, Length: 40 bytes, Status: OK
    [301,11] Written, Length: 40 bytes, Status: OK
    [301,12] Written, Length: 40 bytes, Status: OK
    [301,13] Written, Length: 40 bytes, Status: OK
    [301,14] Written, Length: 40 bytes, Status: OK
    [301,15] Written, Length: 40 bytes, Status: OK
    [301,16] Written, Length: 40 bytes, Status: OK
    [308,0] Written, Length: 1 bytes, Status: Not accepted, Code: 19
    [308,1] Written, Length: 8192 bytes, Status: Not accepted, Code: 19
    [308,3] Written, Length: 1 bytes, Status: Not accepted, Code: 19
    [308,4] Written, Length: 1 bytes, Status: Not accepted, Code: 19
    [308,5] Written, Length: 10 bytes, Status: Not accepted, Code: 19
    [308,6] Written, Length: 1 bytes, Status: Not accepted, Code: 19
    [308,7] Written, Length: 1 bytes, Status: Not accepted, Code: 19
    [308,8] Written, Length: 1 bytes, Status: Not accepted, Code: 19
    [308,9] Written, Length: 40 bytes, Status: Not accepted, Code: 19
    [309,0] Written, Length: 4 bytes, Status: Not accepted, Code: 19
    [309,1] Written, Length: 2 bytes, Status: Not accepted, Code: 19
    [309,2] Written, Length: 12 bytes, Status: Not accepted, Code: 19
    [309,4] Written, Length: 12 bytes, Status: Not accepted, Code: 19
    [309,7] Written, Length: 12 bytes, Status: Not accepted, Code: 19
    [309,17] Written, Length: 12 bytes, Status: Not accepted, Code: 19
    [322,0] Written, Length: 1 bytes, Status: OK
    [334,0] Written, Length: 1 bytes, Status: OK
    [339,0] Written, Length: 511 bytes, Status: OK
    [339,1] Written, Length: 511 bytes, Status: OK
    [341,0] Written, Length: 1 bytes, Status: OK
    [341,3] Written, Length: 4 bytes, Status: OK
    [341,4] Written, Length: 4398 bytes, Status: OK
    [354,0] Written, Length: 3 bytes, Status: OK
    [355,0] Written, Length: 17663 bytes, Status: OK
    [356,0] Written, Length: 2 bytes, Status: OK
    [362,0] Written, Length: 1 bytes, Status: OK
    [362,1] Written, Length: 120 bytes, Status: OK
    [375,0] Written, Length: 400 bytes, Status: OK
    [375,1] Written, Length: 20 bytes, Status: OK
    Write PM Finished, Record written OK: 320, Record written NOT OK: 37


    الان اناليز بعد اعادة الباكب للتاكد من حالة الجهاز
    ونلاحظ حل مشكلة الايمي والسيم لوك
    لكن يوجد مشكلة سيكيورتي

    Started Phone Security Analysis...
    MCU Version V 09.83
    MCU Date 21-09-10
    Product RM-598 (Nokia 7230)
    Manufacturer (c) Nokia
    IMEI 356993048032524
    Mastercode 322072554
    Reading Security Block...
    Security block OK and saved to "RM-598_356993048032524_27082012_064009 ?.SecurityBlock.PM"
    Step 1 : Testing SIMLOCK
    SIMLOCK SEFLTEST PASSED OK!

    Step 2 : Testing SECURITY
    -- SECURITY PROBLEM --


    Phone have failed SECURITY Test, that means Superdongle Area is DAMAGED!
    To repair it, simply slick "SX4 Authorization / SD Repair" button.
    After SX4/SD Repair, don't forget to write PM file with fields 1,309 (if SW don't do this automatically)

    Additionaly, Checking HWC/CCC Certs...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600000001020C192102044100
    CMT_EM_ASIC_ID: 00001040
    CMT_EM_ASIC_ID: 00001030
    CMT_PUBLIC_ID: 11D0021684EE58401A3EF756688D7B20CC957458
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 7B045400E1752022F9EB80B0DEA9C65D
    CMT_BOOT_ROM_CRC: 67E82268
    CMT_SECURE_ROM_CRC: F29CEA60
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAP3Gv40_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.8.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    If software STUCK HERE with box TX LED lit, that means:
    1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
    2. Your cable is not TX2 Enabled!
    3. Transmission error occured, try again
    In either cases, you need to reconnect your box from USB.
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0098003000000131, Toshiba, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00980030 (Toshiba), Size: 128MBytes, VPP: Not Supported
    RAP3Gv40_XSR17_alg.fg, Type: Algorithm, Rev: 768.12.8.0, Algo: XSR 1.6
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 4431C834027BBA0D18A5ED745CAFA04BA679A74A
    APE Subsystem Not Found
    Flashbus Write baud set to 5.0Mbits
    HWC Looks OK!
    CCC Looks OK!
    Restarting MCU...
    -- SECURITY PROBLEM --
    Step 3 : Analyzing Security Block
    "11D0021684EE58401A3EF756688D7B20CC957458.C0000CC2" Exists, That is good...
    Checking SUPERDONGLE...
    SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
    Checking SIMLOCK...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Checking MCU&DSP TIMESTAMPS...
    MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
    Checking CMLA KEYS...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Checking ECC KEYS...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Checking DIV KEYS...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Analyze finished!

    لحل مشكلة السيكيورتي اضغط على
    Authorize / Repair SD keys


    SX4 Authorization / SD Repair Procedure Started....
    "11D0021684EE58401A3EF756688D7B20CC957458.C0000CC2" Exists, That is good...
    MCU Version V 09.83
    MCU Date 21-09-10
    Product RM-604 (Nokia 7230)
    Manufacturer (c) Nokia
    IMEI 356993048032524
    Mastercode 322072554
    Reading Security Block...
    Security block OK and saved to "RM-604_356993048032524_27082012_064332 ?.SecurityBlock.PM"
    SX4 Status: Not authorized (74)
    Started mutual authenthication with card...
    Receiving Phone Seed 1...
    Phone Seed 1 Received
    Sending calculated Data 1, and expecting Seed 2...
    Calculated Data 1 accepted, Phone Seed 2 Received
    Sending calculated Data 2
    Calculated Data 2 sent, Checking Authorization Status again
    Authorization successfully finished!
    Looking for Virgin PM In Database...
    Found, writing...
    [1,2] Written, Length: 10 bytes, Status: OK
    [1,6] Written, Length: 10 bytes, Status: OK
    [1,7] Written, Length: 214 bytes, Status: OK
    [1,13] Written, Length: 10 bytes, Status: OK
    [1,16] Written, Length: 208 bytes, Status: OK
    [1,18] Written, Length: 208 bytes, Status: OK
    [1,20] Written, Length: 208 bytes, Status: OK
    [1,23] Written, Length: 4 bytes, Status: OK
    [1,24] Written, Length: 84 bytes, Status: OK
    [1,25] Written, Length: 24 bytes, Status: OK
    [1,28] Written, Length: 10 bytes, Status: OK
    [1,29] Written, Length: 10 bytes, Status: OK
    [1,31] Written, Length: 208 bytes, Status: OK
    [1,33] Written, Length: 36 bytes, Status: OK
    [1,34] Written, Length: 376 bytes, Status: OK
    [1,37] Written, Length: 4 bytes, Status: OK
    [1,39] Written, Length: 36 bytes, Status: OK
    [1,41] Written, Length: 182 bytes, Status: OK
    [1,42] Written, Length: 4 bytes, Status: OK
    [1,43] Written, Length: 36 bytes, Status: OK
    [1,44] Written, Length: 182 bytes, Status: OK
    [1,45] Written, Length: 182 bytes, Status: OK
    [2,0] Written, Length: 2320 bytes, Status: OK
    [3,0] Written, Length: 2 bytes, Status: OK
    [309,0] Written, Length: 4 bytes, Status: OK
    [309,1] Written, Length: 2 bytes, Status: OK
    [309,2] Written, Length: 12 bytes, Status: OK
    [309,4] Written, Length: 12 bytes, Status: OK
    [309,7] Written, Length: 12 bytes, Status: OK
    [309,17] Written, Length: 12 bytes, Status: OK
    Write PM Finished, Record written OK: 30, Record written NOT OK: 0

    الان علينا كتابة ملفات DCC للكاميرا


    Analyzing Dynamic Camera Configuration...

    --> Primary Camera Not Exists

    Secondary Camera: NI00IIIIRR0301035420003010
    Secondary Camera Configuration is OK!

    Dynamic Camera Configuration Analyze/Repair Finished!


    الان انتهت العملية بفضل الله والجهاز بدون مشاكل وباصدار اقل وهذا انفو واناليز

    MCU Version V 09.83
    MCU Date 21-09-10
    Product RM-604 (Nokia 7230)
    Manufacturer (c) Nokia
    IMEI 356993048032524
    Mastercode 322072554
    IMEI Spare 3A65990384305202
    IMEI SV 3365990384305252F7000000
    PPM V 09.83, 21-09-10, RM-598, (c) Nokia , MEA
    CNT Content: meaa_0590626, V 09.83, 21-09-10, RM-604, (c) Nokia
    PSN 1168299AH
    Product Code 059B1W9
    Module Code 0204859
    Basic Product Code 059D6Z5
    PSD 0000000000000000
    LPSN 0
    RETU 40
    TAHVO 00
    AHNE 41
    HW 1001
    RFIC |Vapaus_6.5 | Mikki_1.1
    DSP ICPR91_10w19_1
    LCD SEIKO
    BT 1673-46038
    Simlock Server SIMLOCK SERVER
    Simlock Key 2440700000000000
    Simlock Profile 0000000000000000
    Simlock Key Cnt 0
    Simlock FBUS Cnt 0
    Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [1,2] State: OPENED Type: GID Data: FFFF
    Simlock [1,3] State: OPENED Type: GID Data: FFFF
    Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [2,2] State: OPENED Type: GID Data: FFFF
    Simlock [2,3] State: OPENED Type: GID Data: FFFF
    Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [3,2] State: OPENED Type: GID Data: FFFF
    Simlock [3,3] State: OPENED Type: GID Data: FFFF
    Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [4,2] State: OPENED Type: GID Data: FFFF
    Simlock [4,3] State: OPENED Type: GID Data: FFFF
    Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [5,2] State: OPENED Type: GID Data: FFFF
    Simlock [5,3] State: OPENED Type: GID Data: FFFF
    Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [6,2] State: OPENED Type: GID Data: FFFF
    Simlock [6,3] State: OPENED Type: GID Data: FFFF
    Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [7,2] State: OPENED Type: GID Data: FFFF
    Simlock [7,3] State: OPENED Type: GID Data: FFFF
    Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF



    الاناليز

    Started Phone Security Analysis...
    MCU Version V 09.83
    MCU Date 21-09-10
    Product RM-604 (Nokia 7230)
    Manufacturer (c) Nokia
    IMEI 356993048032524
    Mastercode 322072554
    Reading Security Block...
    Security block OK and saved to "RM-604_356993048032524_27082012_074606 ã.SecurityBlock.PM"
    Step 1 : Testing SIMLOCK
    SIMLOCK SEFLTEST PASSED OK!
    Step 2 : Testing SECURITY
    SECURITY SEFLTEST PASSED OK!
    Step 3 : Analyzing Security Block
    "11D0021684EE58401A3EF756688D7B20CC957458.C0000CC2" Exists, That is good...
    Checking SUPERDONGLE...
    SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
    Checking SIMLOCK...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Checking MCU&DSP TIMESTAMPS...
    MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
    Checking CMLA KEYS...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Checking ECC KEYS...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Checking DIV KEYS...
    DIV KEYS FOUND AND CHECKSUM OK! PASSED!
    Analyze finished!


    السلام عليكم



    التعديل الأخير تم بواسطة NAPOLI ; 27-08-2012 الساعة 07:25 PM


  2. #2
    .: جيماوي متالق :.
    الصورة الرمزية ameerl

    الحالة
    غير متواجد
    تاريخ التسجيل
    Apr 2011
    المشاركات
    1,714
    الشَكر (المُعطى)
    1086
    الشَكر (المُستلَم)
    2033
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    37

    افتراضي رد: شرح طريقة عمل داونجرد لاجهزة sl3 وبدون مشاكل على الاروع Cyclone box

    مشكور اخي بارك الله بك

  3. الشَكر NAPOLI, zahaf شَكر
  4. #3
    صديق المنتدى
    الصورة الرمزية abo reda

    الحالة
    غير متواجد
    تاريخ التسجيل
    Oct 2010
    الدولة
    المغرب
    العمر
    33
    Phone
    nokia n8
    المشاركات
    2,412
    الشَكر (المُعطى)
    4705
    الشَكر (المُستلَم)
    4403
    الإعجاب (المُعطى)
    1
    الإعجاب (المُستلَم)
    5
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    1 مشاركة
    تمت الاشارة اليه فى
    5 مواضيع
    معدل تقييم المستوى
    67

    افتراضي رد: شرح طريقة عمل داونجرد لاجهزة sl3 وبدون مشاكل على الاروع Cyclone box

    بارك الله بك

  5. الشَكر NAPOLI شَكر
  6. #4
    .: جيماوي مشارك :.
    الصورة الرمزية lsanlmakhfi

    الحالة
    غير متواجد
    تاريخ التسجيل
    May 2012
    الدولة
    الدار البيضاء
    Phone
    نوكيا
    المشاركات
    145
    الشَكر (المُعطى)
    943
    الشَكر (المُستلَم)
    174
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    2
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    13

    افتراضي رد: شرح طريقة عمل داونجرد لاجهزة sl3 وبدون مشاكل على الاروع Cyclone box

    شكرا اخي عندي مشكلة تلف لي الايميل هل من طريقة لاسترجاعه لاني لما اردت استرجاع rpl الدي حفظته في جهاز الكمبيوتر عندما اردت استرجاعه لم تنجح العملية وبكتب لي contact service

  7. الشَكر NAPOLI شَكر
  8. #5
    صديق المنتدى
    الصورة الرمزية NAPOLI

    الحالة
    غير متواجد
    تاريخ التسجيل
    Nov 2008
    Sonork
    ورفعنا لك ذكرك
    المشاركات
    5,522
    الشَكر (المُعطى)
    15759
    الشَكر (المُستلَم)
    7886
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    1 مشاركة
    تمت الاشارة اليه فى
    2 مواضيع
    معدل تقييم المستوى
    142

    افتراضي رد: شرح طريقة عمل داونجرد لاجهزة sl3 وبدون مشاكل على الاروع Cyclone box

    اقتباس المشاركة الأصلية كتبت بواسطة lsanlmakhfi مشاهدة المشاركة
    شكرا اخي عندي مشكلة تلف لي الايميل هل من طريقة لاسترجاعه لاني لما اردت استرجاع rpl الدي حفظته في جهاز الكمبيوتر عندما اردت استرجاعه لم تنجح العملية وبكتب لي contact service

    اخي الكريم اعمل موضوع خاص بك
    بكل الاحوال ارفع اناليز سيكيورتي


  9. #6
    .: جيماوي مشارك :.
    الصورة الرمزية gem-gsm

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jan 2011
    المشاركات
    136
    الشَكر (المُعطى)
    394
    الشَكر (المُستلَم)
    60
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    16

    افتراضي رد: شرح طريقة عمل داونجرد لاجهزة sl3 وبدون مشاكل على الاروع Cyclone box

    رائع جدا بارك الله بك

  10. الشَكر NAPOLI شَكر
  11. #7
    .:: Super Moderator ::.
    الصورة الرمزية seakrokram

    الحالة
    متواجد
    تاريخ التسجيل
    Nov 2009
    الدولة
    العـــــــــ الحبيب ـــــــراق
    العمر
    31
    Sonork
    100.1627804
    Phone
    Samsung A8 Duos
    المشاركات
    13,381
    الشَكر (المُعطى)
    29583
    الشَكر (المُستلَم)
    20627
    الإعجاب (المُعطى)
    35
    الإعجاب (المُستلَم)
    505
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    4 مشاركة
    تمت الاشارة اليه فى
    118 مواضيع
    معدل تقييم المستوى
    1654

    افتراضي رد: شرح طريقة عمل داونجرد لاجهزة sl3 وبدون مشاكل على الاروع Cyclone box

    بارك الله فيك اخي ايهم

  12. الشَكر NAPOLI شَكر
  13. #8
    .: جيماوي مشارك :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jan 2011
    المشاركات
    104
    الشَكر (المُعطى)
    92
    الشَكر (المُستلَم)
    40
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    15

    افتراضي رد: شرح طريقة عمل داونجرد لاجهزة sl3 وبدون مشاكل على الاروع Cyclone box

    بارك الله فيك

  14. الشَكر NAPOLI شَكر

الكلمات الدلالية لهذا الموضوع

المفضلات

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •