c2-03 local mode بعد السوفت
c2-03 local mode بعد السوفت
عملت على اليو اس بي على بوكس الادفانس
AUTO SELECTED DEAD USB FLASHING...
If Flashing DOES NOT Start in 5 Seconds,
Then Perform Steps 1, 2, 3 and 4...
1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly...
Infineon USB Boot: F00A1FB300020303010100FF
Sending PBL...
PBL Successfully Sent...
Sending SBL...
SBL Successfully Sent...
Setting Transmission Speed Done...
Flash Chip Manufacturer: Samsung Electronics Corp.
Flash Boot Successful...
Sections : 04
Current File : rm702__06.96.mcusw
Compile Name: rm702__06.96.mcusw_ebl_psi.fls
Image Type : Main Firmware
Data Size : 29363592 Bytes
Sending Certificate Block
FIRMWARE Certificate Block Sent Successfully...
Processing Section 01 of 04
FIRMWARE Erase Block: 0x40000000~0x4001FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 131072 bytes
Data Checksum: EE63
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 02 of 04
FIRMWARE Erase Block: 0x40040000~0x4005FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 131072 bytes
Data Checksum: 7AB2
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 03 of 04
FIRMWARE Erase Block: 0x40060000~0x4015FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 1048576 bytes
Data Checksum: CDFC
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 04 of 04
FIRMWARE Erase Block: 0x40280000~0x41DBFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 28049408 bytes
Data Checksum: FD02
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Data Verification Successful...
Sections : 01
Current File : rm702__06.96.ppm_m_a
Compile Name: package_m_a.ppm_ebl_psi.fls
Image Type : PPM Image
Data Size : 4177924 Bytes
Sending Certificate Block
PPM Certificate Block Sent Successfully...
Processing Section 01 of 01
PPM Erase Block: 0x41DC0000~0x424BFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 4174580 bytes
Data Checksum: A130
Uploading Data Blocks to phone...
Block Write Successful...
PPM Data Blocks uploaded to phone...
Data Verification Successful...
Sections : 01
Current File : rm702__06.96.image_m_a_059G5T4
Compile Name: package_m_a_059G5T4.image.fls
Image Type : CONTENT Package
Data Size : 12848400 Bytes
Sending Certificate Block
CONTENT Certificate Block Sent Successfully...
Processing Section 01 of 01
CONTENT Erase Block: 0x424C0000~0x43E1FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 12845056 bytes
Data Checksum: CB5B
Uploading Data Blocks to phone...
Block Write Successful...
CONTENT Data Blocks uploaded to phone...
Data Verification Successful...
Total Flashing Time (Erase + Flashing) : 00:03:21
(Booting time is NOT Included)
Waiting for Phone to Start-Up..(Max 150 seconds)
Elapsed Time: 5 Seconds...
Elapsed Time: 10 Seconds...
MCU: V 06.96 09-09-11 RM-702 (c) Nokia
IMEI: 12345610654321?
Model : K C2-03
Product Serial Number: E06F771AI
Product Code : 059D331
Module Code : 0204666
Basic Production Code: 0593195
Long Production SN : 0
PPM SW Version : V 06.96 09-09-11 RM-702 (c) Nokia M_A
BT MCM Version : 19b5-22012
MCU SW Version : V 06.96 09-09-11 RM-702 (c) Nokia
HW Version : 2000
RFIC Version : Dummy RFIC version
LCD Version : TPO
Content Pack Version : Content: m_a_059G5T4 V 06.96 09-09-11 RM-702 (c) Nokia
********** SIMLOCK INFO **********
CONFIG_DATA : 0000000000000000
PROFILE_BITS : 0000000000030000
ASIC : 11
PROVIDER : Unknown Provider
Unable to read SP Data..
ST_SIMLOCK_TEST : PASSED
ST_LCD_TEST : PASSED
SECURITY_CODE : 5555555555
MASTER_CODE : 1370355423
PHONE_MODE : TEST
================================================
Dynamic Camera Configuration
================================================
DCC ID : 094B2F01
DCC Ver: 009017
Status : OK
FACTORY SET TO : Full Factory Set
OK
FACTORY SET TO : User Data
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Service Center
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : Production Tune
OK
RESET LIFE TIMER TO : 0000:00
OK
رد مع اقتباس
المشاركة الأصلية كتبت بواسطة El_Hakim_Gsm
المفضلات