جهاز 1280
لو سمحتوا جالي جهاز 1280 فاضل باور
لوحده من غير اي مسببات
وده الانفو من على بوكس التربو
VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done
Booting Phone...
CPU ID Response: A200341100
CPU Type: XG110 2.1B
Phone Booted at after First attempt...
******************************************************
START INFINEON BUS CHECK
******************************************************
Sending PBL 37888 bytes...
PBL Successfully Sent...
Sending SBL 65024 bytes...
SBL Successfully Sent...
Flash Chip Manufacturer: STMicroelectronics
Flash Chip Type: M58WR064 64 Mbit (4Mb x 16) NOR
Extended Information: Multiple Bank / Burst / 1.8v
******************************************************
INFINEON BUS CHECK DONE
******************************************************
MCU: V 06.20 01-12-10 RM-647 (c) Nokia
IMEI: 357380044516412
Product Serial Number: 862A2E8AI
Product Code : 0592307
Module Code : 0204426
Basic Production Code: 059F8R3
PPM SW Version : V 06.20 01-12-10 RM-647 (c) Nokia IC
ADSP Version : p V 06.20\n01-12-10\nRM-647\n(c) NMP\nic
MCU SW Version : V 06.20 01-12-10 RM-647 (c) Nokia
HW Version : 3003
UEM Version : 1328
UPP Version : 8850
LCD Version : UNKWN: IDs: 00:00:00
********** SIMLOCK INFO **********
CONFIG_DATA : 0010100000000000
PROFILE_BITS : 0000000000030002
ASIC : 11
PROVIDER : Default Test Operator
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST : FAILED
Phone Cannot Enter Normal Mode if LCD
is Damaged or LCD is not Properly
Connected to the Main PCB
Make sure you have installed the
COMPLETE Flash Package for this Phone...
Goto "Settings" --> "Nokia Settings" and verify that
the Folder where you installed your Flash Files are
in the "PRODUCT PATH TO SCAN" List...
وكل اللي عملتو فيه
اني عملتلو سوفت وير
نفس النتيجه
وغيرتلو شاشه برضو نفس النتيجه
ارجو الافاده من اهل العلم
رد مع اقتباس
المفضلات