المشاركة الأصلية كتبت بواسطة محمدالجدى
mx box بيعمل scan ومابيعمل check bus
Phone type: RH-122
SW version: V 03.70 14-04-09 RH-122 (c) Nokia
Imei plain: 35605503723708-2
Product code: 0573217
Cellular system: GSM
ASIC ID: 0x2293, type: 11
Ppm Id: IC
Language Pack:
English,Arabic,French,Swahili
Master code: 6125751766
Imei net: 35605503723708
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10
CONFIG_DATA: 0010100000000000
PROFILE_BITS: 0000000000030002
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
Version Info:
MCU SW version: V 03.70 14-04-09 RH-122 (c) Nokia
HW version: 1501
UEM version: 1328
UPP version: 8851
RFIC version: 0700
DSP version: ICPR81_09w10_UPP
LCD version: SDI:BOHAIv92 NT39121
PPM version: V 03.70 14-04-09 RH-122 (c) Nokia IC
ADSP SW version: p V 03.70\n14-04-09\nRH-122\n(c) NMP\nic
Product Info:
Production serial number: IHU480869
Product code: 0573217
Module code: 0204078
Basic production code: 0568809
Product specific data: 0000000D0000000000000000000000000000
Serial Numbers:
IMEI plain: 356055037237082
IMEI spare to net: 3A 65 50 05 73 32 07 08
IMEI SV to net: 33 65 50 05 73 32 07 28 F5
Master code: 6125751766
Other Info:
CS type: GSM/DCS1800
Battery voltage: 4885 mV
Battery current: 32768 mA
BSI: 4.0 KOhm
Imei net: 35605503723708
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10
CONFIG_DATA: 0010100000000000
PROFILE_BITS: 0000000000030002
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 2.031 s
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN
Using device: HTI, FW ver: 00.50, SN: 0000D44B
Connection status: OHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.19815(08-01-2012), Library ver: 1.0.0.13716(10-01-2012)
Boot error: CC CC CC 00
- Repeat the procedure. Sometimes it is a matter of temporary communication problem or similar.
- Check that all used cable are solid without any visible damage and have good contact. If possible, try with other cables.
- On rare occasions phone might be damaged or dead. So, if possible, try with another phone.
المفضلات