Failed to Read SL3 LOG File -> Initial SP corrupted or not a Baseband5 phone detected, maybe try again?
Failed to Read SL3 LOG File -> Initial SP corrupted or not a Baseband5 phone detected, maybe try again?
asic Product Code 0585582
PSD 0000000000000000
LPSN 0
HW 3000
RFIC 96
LCD TPO
BT 19b5-22012
Asic 11
HW Signature 3BC5F0E673603BD7
Simlock Server SIMLOCK SERVER
Simlock Key 2081000000000000
Simlock Profile 800000000003000B
Simlock Aux 000B0000
Simlock IMEI 00003597630455802800
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 20810F
Simlock [2,1] State: CLOSED Type: MCC-MNC Data: 64710F
Auto Selecting Flash Files on User Request...
[Nokia C1-01 USB Phonet]: Port opened OK!
Product Code: 059F318
Scanning avaiable products...
No flash paths set! Go to Settings -> Paths and set them!
Scanning avaiable products...
No flash paths set! Go to Settings -> Paths and set them!
No Flash Datapackage installed for this Phone!
Reading SL3 LOG File...
[Nokia C1-01 USB Phonet]: Port opened OK!
MCU Version V 04.40
MCU Date 23-02-11
Product RM-607 (Nokia C1-01)
Manufacturer (c) Nokia
IMEI 359763045580289
Mastercode 5414715456
Failed to Read SL3 LOG File -> Initial SP corrupted or not a Baseband5 phone detected, maybe try agai
هدا انفو الجهاز
نرجو تزويدي بطريقة الصحيحة
نرجو الرد
من الاعضاء الوقت يداهمني
تم دعمه اخيرا
اضغط علىكود:And now best, you don't need to know phone CPU platform. Just select USB connection, go to BB5 tab, click good old "Read LBF Data" button, and Cyclone will AUTOMATICALLY detect if this is xgold213, or Texas Instruments based product
Read LBF Data
شكرا حبيبي خالد لقد لاحضت دالك
وحملة اخر فرجن
عند عمل read LBf
يعطيني هدا الانفو
Gold213 Detected
Analyzing Profile Bits...
Phone can be NCK unlocked using KEYPAD
Phone can be NCK unlocked using FBUS
15 Digits NCK Found
Booting X-Gold via USB...
If PC Can't detect any new device, probably your phone is erased. Do following if needed:
1. Eject battery
2. Eject cable
3. Insert cable
4. Insert battery
5. Press power-on
[Nokia C1-01 USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
X-Gold: Ready, MCU ID Block: 1FB300020303010100FF
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Quantum_Bootloader_2.5_M1S1
[EBL] : Ready
Setting Baudrate to 6500000bps...
Baudrate Accepted (6500000bps)
Flash Chip 0x00898982, Intel, Size: 64MBytes
Succe
تم الهاتف يدخل لوكال مود
ها هي قراءة اخرى لكن كيف يتم قراءة NCK او
فك الشفرة
Reading SL3 LOG File...
[Nokia C1-01 USB Phonet]: Port opened OK!
MCU Version V 06.07
MCU Date 13-10-11
Product RM-607 (Nokia C1-01)
Manufacturer (c) Nokia
IMEI 359332041941356
Mastercode 16766544
XGold213 Detected
Analyzing Profile Bits...
Phone can be NCK unlocked using KEYPAD
Phone can be NCK unlocked using FBUS
15 Digits NCK Found
Booting X-Gold via USB...
If PC Can't detect any new device, probably your phone is erased. Do following if needed:
1. Eject battery
2. Eject cable
3. Insert cable
4. Insert battery
5. Press power-on
[Nokia C1-01 USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
X-Gold: Ready, MCU ID Block: 1FB300020303010100FF
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Quantum_Bootloader_2.5_M1S1
[EBL] : Ready
Setting Baudrate to 6500000bps...
Baudrate Accepted (6500000bps)
Flash Chip 0x00898982, Intel, Size: 64MBytes
Success!
المفضلات