فلاشه جهاز 6131ztc

[fhryar]

ودى بينات ال Initializing...
DA_LIB_VER_3.9.0.0
It is sensing the pinout fast...
D-=17 D+=16
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM7
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 230400 is ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=355223042502830
IMEI 2=355223042502848
--------NOR_FLASH_CONFIG--------
Flash Bank count=1
EFS sector count=4
File sector count=0
Sector size=0x00010000
Flash start addr=0x00000000
Flash size=0x00800000
Fix NV addr=0x007A0000
Product information addr=0x007F0000
MMI resource addr=0x00550000
------Auto Format Address-------
Start=0x007B0000
Size =0x00040000
Read FS info...done
فلاشه

[AdReAnO]

ايه مشكلة الجهاز

الفلاشة هنا
https://www.gem-flash.com/vb/showthread.php?t=240388

[fhryar]

الجهاز كان بيفتح ويقفل بعد الفتح وبعد الفرمات وانلوك بقا مبيقتحش خالص

[fhryar]

لسه المشكله زى مهيا بعد تغير الفلاشه

[fhryar]

لو سمحت ممكن الرد كده الجهاز مات ولا ايه انا عملتله ودى بينات Initializing...
DA_LIB_VER_3.9.0.0
It is sensing the pinout fast...
D-=17 D+=16
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM7
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 230400 is ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action.
All Done.
reset

[AdReAnO]

نزل الفلاشة دي
http://www.mediafire.com/?k37q8os5wzq7yis

ان لم تعمل جرب هذه
http://www.mediafire.com/?pu3gnvc2g4n8qtx

واخبرنا بالنتيجة

[fhryar]

الفلاشه الاوله مش بتنزل الرابط فيه مشكله ووالتانيه نزلت ونفس المشكله وعند الفرمات بيظهر للرساله دى Initializing...
DA_LIB_VER_3.9.0.0
It is sensing the pinout fast...
D-=8 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM7
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 230400 is ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x00790000, Size=0x00060000, Running NV=0xA01A7A00
Error: Unsaft EFS Address, Please input the right format address and try again.
Failed to auto format.

[AdReAnO]

لا داعي للفورمات
بعض الاجهزة الاسبريد غير مدعومة فورمات

هل الجهاز يعمل الان
حتي لو اشتغل شاشة بيضاء

هنا فلاشة

وهنا فلاشة

جرب واخبرنا بالنتيجة

[fhryar]

هوه فعلا بيفتح شاشه بيضه

[fhryar]

ولا اقوم بعمل انلوك بعد التفليش