عملية تفليش ناجحة ولكن بدون حفظ باكب علي الاصدار 1.5 3.5
MXKEY [FT SCR2000 0], SN: C084BB04
Connection status: UHCI:HUB::USB 2.00 (Full-speed)
Driver: NMWCD, ver: 7.1.32.70
Module ver: 1.0.0.19228(10-11-2011), Library ver: 1.0.0.13150(10-11-2011)
Processing MCU file: rm217__07.30.mcusw
[BB5,BB5 ALGORITHM] size: 14.50 MB
Supported Ids: 0103192101001101, 010C192101001101
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB device ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 472EEA3
CMT SYSTEM ASIC ID: 000000010000022600010006010C192101001101 [RAPGSM ver: 1.1]
CMT EM0 ID: 00000232
CMT EM1 ID: 00000353
CMT PUBLIC ID: 0B5001018AC48B567298BB29D0B1A8DE2A1213B5
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID: 191EC665DFAAF68F
Flashing CMT Update Server Data, ULO: 0x38C0 bytes
Update Server code succesfully sent to phone.
Flashing CMT Update Server Data, UPDAPP: 0x3CA00 bytes
Update Server code succesfully sent to phone.
Flashing CMT Update Server Data, PASUBTOC: 0x4A9C0 bytes
Update Server code succesfully sent to phone.
Waiting for USB device removal ...OK
Waiting for USB device arrival ...OK
Device connected: nmwcdnsuc\Nokia BB5 ADL Loader USB Generic, PORT_ID: 3B791826
Verifying communication to device OK.
Erase size: 16.37 MB
CMT FLASH,NOR area [00000000-000006BF] erased in 0.578 s
CMT FLASH,NOR area [000006C0-0001FFFF] erased in 0.032 s
CMT FLASH,NOR area [00020000-0007FFFF] erased in 1.938 s
CMT FLASH,NOR area [00080000-000DFFFF] erased in 0.172 s
CMT FLASH,NOR area [00100000-001FFFFF] erased in 0.281 s
CMT FLASH,NOR area [00200000-0031FFFF] erased in 5.063 s
CMT FLASH,NOR area [00320000-0105FFFF] erased in 1 min 1.093 s
CMT FLASH,NOR area [01060000-01067FFF] erased in 0.703 s
CMT FLASH,NOR area [01068000-0107FFFF] erased in 0.015 s
Flash programming ...
CMT NOLO block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT PASUBTOC block sent
Selecting first CMT PAPUB block with matching RootKey.
CMT PAPUBKEYS: 7F7E6491 [RAP Certificate 52 v1] sent
CMT UPDAPP block sent
CMT DSP0 block sent
CMT MCUSW block sent
CMT PMM_CONF block sent
CMT SBIF_CONF block sent
Programming completed in 1 min 29.922 s
Processing PPM file: rm217__07.30.ppm_mea1
[BB5,BB5 ALGORITHM] size: 3.81 MB
Supported Ids: 0103192101001101, 010C192101001101
Erase size: 5.50 MB
CMT FLASH,NOR area [01080000-015FFFFF] erased in 16.703 s
Flash programming ...
Programming completed in 23.406 s
Processing CNT file: rm217__07.30.image_ora_pl_red_128
[BB5,BB5 ALGORITHM] page size: 128 K size: 4.51 MB
Supported Ids: 0103192101001101, 010C192101001101
Erase size: 9.87 MB
CMT FLASH,NOR area [01600000-01FDFFFF] erased in 46.282 s
UCP page size is 128 K.
Flash programming ...
Programming completed in 29.359 s
Total time for flashing process(boot+erase+write) was 4 min 54.047 s
Waiting for USB device removal ...OK
Waiting for USB device arrival ...OK
Waiting for device boot up ...
Device connected: nmwcdc\Nokia 6300 USB Phonet, PORT_ID: D55EB56
Verifying communication to device OK.
Phone type: RM-217 (Nokia 6300)
SW version: V 07.30 07-05-09 RM-217 (c) Nokia.
Imei plain: 35690103302665-8
Product code: 0543123
Battery voltage: 3840 mV, current: 113 mA
Language Pack:
- not available.
SLPA ver[1]: PA_SL (15 digit NCK)
SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed
Imei net: 356901033026658
Version: SIMLOCK SERVER VERSION 63
Counter: 0/3, 0/10
CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 1.093 s
كنت حاطط علي تفليش امن بمعني انة يجب حفظ rpl
ولكن علي هذا الاصدار mobileEx 3.5 (rev1.5) لم يأخذ باكب
رد مع اقتباس
المشاركة الأصلية كتبت بواسطة almohtaref
المفضلات