بعد السوفت لايعمل c1شريحتينRM-689

**ناطق الروسي** · 05-10-2011, 06:43 PM

السلام عليكم اخوان الجهاز سقط على الارض انطفى نزلت سوفت له ياخذ سوفت ولايعمل

وهذا الانفو PPM SW : V 02.60 06-08-10 RM-689 (c) Nokia IA
Platform: Infineon
Prd.Code: 059B368
Bpr.Code: 0597858
Prod.Sn : 28B30A7AI
HW Vers : 3000
UEM : 1328
UPP : 8850 [2292]
LCD Type: UNKWN: IDs: 00:00:00
IMEI : 353381-04-126793-8
SL Conf : 001-01-00000000000
SL Prof : 000000000003000-2
SL Var : 00003533810412679300
SL Aux : 000B0000
HW Sig : 11070EFCFE1F5DA1
Box Id : FFFFFFFFFFFFFFFF
BLK1= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK2= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK3= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK4= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK5= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK6= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK7= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
Provider: GSM Test Equipment

05-10-2011 06:43 PM

**ناطق الروسي** · 05-10-2011, 06:50 PM

وهذه قرائة الفلاشة If used non Auto-Ignition cable, press Power-On button
IF_SBL: XGOLD110, Ok
IF_EBL: Default_RAM_Bootloader.10.19, Mode: CC
BAUD_R: 921600
FL_ID : EC005422, Samsung K8S6415ETC 64Mb
MCU FLASH BUNDLE: rm689_002.600
Flash File: hw_s01_rm689_r02.600.fls
Erase Area: 0x00800000 - 0x00A0FFFE, Erased: 00:10
Write Area: 0x00800000 - 0x00A0FFFE, Written: 00:35
Erase Area: 0x00C60000 - 0x00EAFFFE, Erased: 00:11
Write Area: 0x00C60000 - 0x00E6477E, Written: 00:34
Erase Area: 0x00FFC000 - 0x00FFFFFE, Erased: 00:00
Write Area: 0x00FFC000 - 0x00FFC03E, Written: 00:00
PPM FLASH BUNDLE: rm689_002.60ia
Flash File: hw_s01_rm689_002.60ia.fls
Erase Area: 0x00210000 - 0x0045FFFE, Erased: 00:11
Write Area: 0x00210000 - 0x00414A7E, Written: 00:34
CNT FLASH BUNDLE: rm6890_nai02.60ia
Flash File: hw_s01_rm6890_nai02.60ia.fls
Erase Area: 0x00EB0000 - 0x00F7FFFE, Erased: 00:04
Write Area: 0x00EB0000 - 0x00F010BE, Written: 00:05
Flashing Done: 02:37
ShutDown Done