لما اعطية ال rbl بيعطيني هالمعلومات
VBATT OFF...
VBATT ON
Setting VBATT Done!...
AdvanceBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5
******************************************************
TIME STARTS HERE
******************************************************
BootFlashModeDCT5Ex Succeeded after 3 Attempts
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0 (0x00) bytes returned
Number of Sub Blocks 7 (0x07)
1 SYSTEM_ASIC_ID 01
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000001
ID DWORD 1 : 00000226
ID DWORD 2 : 00010006
ID DWORD 3 : 010C1921
ID DWORD 4 : 01001101
2 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000232
3 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000353
4 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 02400105
ID DWORD 1 : 79966056
ID DWORD 2 : EBDCAA80
ID DWORD 3 : C9B60D82
ID DWORD 4 : 4F6A6264
5 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
6 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : BA F3 A9 C3 DB FA 84 54 93 7D B7 7F 2B 88 52 B1
7 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : 191EC665
CRC 1 : DFAAF68F
Checksum 84
SearchForBootstrap_DCT5..
C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAP3Gv3_2nd.fg
Boot File - Version 010.042.00
Boot File - Revision 0x0000 (0)
eBB5ProtocolType == Original
SearchForBootstrap_DCT5 : No Error - 0 (0x00)
Secondary Loader Sent...
ConfigurationRequest_DCT5 (RAM_SIZE_BB5 0x0000)..
MCU_CONFIGURATION_RESPONSE_BB5:
MessageID : 03
SubBlocks : 03
1 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 00
Manufacturer Code : 00EC ->
Device ID : 22FE -> K8S5615ETA
Extended/Fixed ID : 0000
Revision ID : 6921
2 Sub Block ID : 11 STORAGE_DEVICE_CONTENTS_BB5
Block Length : 13
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 00
Device Contents : FFFFFFFFFFFFFFFFFFFF
3 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : MMC 04
Device Index : 00
Manufacturer Code : FFFF -> Flash
Device ID : 0000 -> BAD FLASH TYPE
Extended/Fixed ID : 0000
Revision ID : 0000
Checksum : 1A
SearchForBootstrap_DCT5 : No Error - 0 (0x00)
FLS1SendAlgoCodeEx..
SendAlgoCode_DCT5..
SearchForAlgorithm_DCT5..
Looking for ALL Devices...
Searching Algorithm Files NOR (00) ManID :00EC DevID :22FE ExtID :0000 RevID :6921
Flash De******or
Manufacturer Code : 00EC
Device ID : 22FE
Extended/Fixed ID : 0000
Revision ID : 0000
Size : 02000000 (32 MB)
VPP Info : 0009
Erase10s : 28
Block1s : 32
BErase1s : 02
Reserved0 : 00
Reserved1 : 00
Reserved2 : 00
VPPInfo : VPP_INFO_3V_MASK VPP_INFO_9V_MASK
C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAP3Gv3_algo.fg
Algorithm File - Version 010.040.00
Algorithm File - Revision 0x0000 (0)
eBB5ProtocolType == Original
SearchForAlgorithm_DCT5 : No Error - 0 (0x00)
TransmissionTypeRequest_DCT5...
SuggestedType : 01 16BIT
TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 20 01 01 DC
ReturnedType : 01 16BIT
TransmissionTypeRequest_DCT5 : No Error - 0 (0x00)
Uploading ALGO File...
SendAlgoCodeFile_DCT5 : No Error - 0 (0x00)
Pabub KEY Request
No PAPUBKeysHash Returned
VPP Enabled by Software
Using Internal VPP
TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 20 01 04 D9
ReturnedType : 04 DDR & 2TX
TransmissionTypeRequest_DCT5 : No Error - 0 (0x00)
StartErase_DCT5...
BlockLength : 0x10 (16)
ERASE Blocks : 0x01 (1)
0 ERASE_AREA_BB5 0x13
Block Length : 0x0D (13)
BB ASIC Index : 0x00 CMT
Erase_SendEraseBlock_BB5_NAND
Task in Progress... Please Wait...
Successfully erased..
Now Writing : CMT NPC Certificate 0x0200 Bytes
Status_BB5 STATUS_REQUEST_BB5..
1 Sub Block ID : 16 PROGRAMMING_ERROR_BB5
Block Length : 0F
BB ASIC Index : 00
Error Type : 06
Error Spec : 0E
Offending Address : 4E504300
Expected Content : 00000000
Detected Content : 00000000
Try to change the Flashing clock...
ERROR: Failed to Write RPL...
.gif)
رد: ارجوكم مساعدة بجهاز 6300
رد مع اقتباس
المفضلات