C3-01 RM-640 باستخدام USP

**NAPOLI** · 20-07-2011, 07:18 PM

Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia/Blackberry Application v01.66, (Jul 19 2011 16:55:18, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number:
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk01 / wk06
Initializing security card...
Card Serial Number:
Card Firmware Revision:
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.01v PASSED
MCU Voltage 3.27v PASSED
Core Voltage 1.76v PASSED
VBAT Voltage 0.00v PASSED
VBAT Voltage 4.96v PASSED
Box VPP disabled
VPP Voltage 0.00v PASSED
Internal Box VPP Enabled
VPP Voltage 4.95v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.04v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing rm640__06.00.mcusw (CMT)...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104
CMT_EM_ASIC_ID: 00001051
CMT_EM_ASIC_ID: 00001060
CMT_PUBLIC_ID: 0C500119AFD80344092935216C642D78068DE0CE
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B
CMT_BOOT_ROM_CRC: E693EF0D
CMT_SECURE_ROM_CRC: AC22615B
CMT Ready!
rm640__06.00.mcusw, Type: Flash Image, Algo: BB5, XSR 1.6
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.16.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0098003000000131, Toshiba, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00980030 (Toshiba), Size: 128MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.16.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5AA09885C97BF3B0F6783A6337506F9394F346EF
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00020000-0x000203FF, ONENAND
EraseArea[0,CMT]: 0x00060000-0x0009FFFF, ONENAND
EraseArea[0,CMT]: 0x000A0000-0x0041FFFF, ONENAND
EraseArea[0,CMT]: 0x00420000-0x0069FFFF, ONENAND
EraseArea[0,CMT]: 0x006A0000-0x006DFFFF, ONENAND
EraseArea[0,CMT]: 0x006E0000-0x0123FFFF, ONENAND
EraseArea[0,CMT]: 0x02060000-0x020BFFFF, ONENAND
EraseArea[0,CMT]: 0x02CC0000-0x0333FFFF, ONENAND
EraseArea[0,CMT]: 0x07540000-0x07B3FFFF, ONENAND
EraseArea[0,CMT]: 0x01240000-0x0205FFFF, ONENAND
Erase Partition (CMT)
Erase Partition (CMT)
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 1.547s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT LDSP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT MCUSW1 Certificate...
Writing CMT GENIO_INIT Certificate...
Writing CMT ISA+DYNSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 53.406s
Flashing Speed: 4807.18 kBit/S
Processing rm640__06.00.mcusw (APE)...
Processing rm640__06.00.ppm_meaa (CMT)...
rm640__06.00.ppm_meaa, Type: Flash Image, Algo: BB5, XSR 1.6
PAPUBKEYS Hash for CMT: 5AA09885C97BF3B0F6783A6337506F9394F346EF
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x020C0000-0x02CBFFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.297s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 12.391s
Flashing Speed: 4913.40 kBit/S
Processing rm640__06.00.ppm_meaa (APE)...
Processing rm640__06.00.image_meaa_0599541_006 (CMT)...
rm640__06.00.image_meaa_0599541_006, Type: Flash Image, Algo: BB5, XSR 1.6
PAPUBKEYS Hash for CMT: 5AA09885C97BF3B0F6783A6337506F9394F346EF
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x03340000-0x0753FFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 3.31s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 63.438s
Flashing Speed: 4743.62 kBit/S
Processing rm640__06.00.image_meaa_0599541_006 (APE)...
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia C3-01 USB Phonet]: Port opened OK!
[Nokia C3-01 USB Phonet]: Port opened OK!
[Nokia C3-01 USB Phonet]: Port opened OK!
[Nokia C3-01 USB Phonet]: Port opened OK!
[Nokia C3-01 USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia C3-01 USB Phonet]: Port opened OK!
MCU Version V 06.00
MCU Date 28-03-11
Product RM-640 (Nokia RM-640)
Manufacturer (c) Nokia
IMEI 357019046323936
Mastercode 7753427341
IMEI Spare 3A75100964239303
IMEI SV 3375100964239333F3000000
PPM V 06.00, 28-03-11, RM-640, (c) Nokia , MEA
CNT Content: meaa_0599541, V 06.00, 28-03-11, RM-640, (c) Nokia
PSN CKP623306
Product Code 0599542
Module Code 0204603
Basic Product Code 0596068
PSD 0000000000000000
LPSN 0
WLAN MAC D4C1FCAE976C
RETU 51
TAHVO 00
AHNE 11
HW 1002
RFIC |Alli_4.3.4
DSP 92_MP2.3_5.96
LCD AUO
BT 4217-v610
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
Setting factory defaults of: Factory set full
[Nokia C3-01 USB Phonet]: Port opened OK!
[Nokia C3-01 USB Phonet]: Port opened OK!
Factory defaults set OK