السلام عليكم
هل من حل مع هذه المشكلة p509
الجهاز مش موجود علا القائمة ولكن نفس البورد ضرب علا الباتش انلوك علا اوكتابيوس
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [LG P500]
Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OKFAILED
Starting communication with resurrector...FAILED
ERROR: Wrong DCC data checksum.
ERROR: No response from the DCC Loader. Terminating.
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [LG P500]
Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...FAILED
ERROR: RAM memory selftest failed.
pen serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [LG P500]
Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...FAILED
ERROR: Wrong response code from the RIFF Box: 0x45
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [LG P500]
Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OKFAILED
Starting communication with resurrector...FAILED
ERROR: No response from the RIFF Box.
ERROR: No response from the DCC Loader. Terminating.
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [LG P500]
Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Flashing the dead body...
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x00260000
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [LG P500]
Restarting target (nRST Low then High)...OK
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [LG P500]
Connecting to the dead body...OK
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Model selected: LG - LG P500
Detected dead body ID: 0x203C00E1
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [LG P500]
Connecting to the target...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x63211785, IR Length = 0x35322E bits
Device on TAP #1: ID = 0xFFFFFFFF, IR Length = 0x20A0DA13 bits
Device on TAP #2: ID = 0xFFFFFFFF, IR Length = 0xFFFFFFFF bits
Device on TAP #3: ID = 0xFFFFFFFF, IR Length = 0xFFFFFFFF bits
Device on TAP #4: ID = 0x00000000, IR Length = 0xFFFFFFFF bits
Device on TAP #5: ID = 0x80002B70, IR Length = 0x01 bits
Device on TAP #6: ID = 0x00000000, IR Length = 0x600000DB bits
Device on TAP #7: ID = 0x00000000, IR Length = 0x00 bits
Device on TAP #8: ID = 0x00000000, IR Length = 0x00 bits
Device on TAP #9: ID = 0x00000000, IR Length = 0x00 bits
Device on TAP #10: ID = 0x00000000, IR Length = 0x00 bits
Device on TAP #11: ID = 0x00000000, IR Length = 0x00 bits
Device on TAP #12: ID = 0x00000000, IR Length = 0x00 bits
Device on TAP #13: ID = 0x00000000, IR Length = 0x00 bits
Device on TAP #14: ID = 0x00000000, IR Length = 0x00 bits
Device on TAP #15: ID = 0x00000000, IR Length = 0x00 bits
Device on TAP #16: ID = 0x00000000, IR Length = 0x00 bits
Total IR length: 0x31206572 bits
الرجاء المساااااااااااعدة اخواني
المفضلات