قائمة الاعضاء المشار اليهم

النتائج 1 إلى 3 من 3

الموضوع: Unlock K1/Z3 without TP

  1. #1
    صديق المنتدى
    الصورة الرمزية mafea55

    الحالة
    غير متواجد
    تاريخ التسجيل
    Mar 2008
    الدولة
    فلسطين-رام الله دوار المنارة
    العمر
    37
    Phone
    TWINS PHONE
    المشاركات
    1,505
    الشَكر (المُعطى)
    3
    الشَكر (المُستلَم)
    868
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    50

    Thumbs up Unlock K1/Z3 without TP

    ~~~ Unlock K1/Z3 without TP ~~~




    You will need: -


    MS Tool (use searh botton)


    K1/Z3 boot core( download link is below)



    Here are the quick steps for this tutorial.



    1. Open up MS tool and select your phone profile (K1 or Z3.


    2. Connect phone in bootloader mode usiung the *+# + power on method


    3. Select "Read backup" and choose PDS


    *Note if your phone gets a critical error message here please do not use the rest of this tutorial.



    If the backup was done without any error this means that the phone is compatible with the tutorial as mstool can read data from the RAMDLD and can write the bootloader and read the PDS!



    Now only proceed if everything is okay: battery fully charged without sim card and memory card.




    Let's continue :-



    4. Conect phone in bootloader mode "*" + "#" + "power";


    5. Open mstool and click in "Write Backup"


    6. Select the file "K1__BOOTCORE_TP.bkp" for K1 or "Z3__BOOTCORE_TP.bkp" for Z3;


    7. OK. After your phone shuts down automatically, remove the battery and replace the battery. The phone will be recognized by the PC. To see if everything is okay, open RSDLite and make sure it detected "S BLANK NEPTUNE LTE2"... If it is, everything is ok! The phone screen is black! This is OK.


    8. Now open mstool and click "unlock". Wait for the phone being disconnected, remove the battery and replace the battery again;


    9. In mstool click "Write Backup";


    10. Select bootloader 0A.B2 for k1 and 0A.C0 for Z3;


    Enjoy!





    معكم بكل جديد:_mafea55



  2. #2
    صديق المنتدى
    الصورة الرمزية ali2002

    الحالة
    غير متواجد
    تاريخ التسجيل
    Sep 2007
    الدولة
    Turkey Istanbul
    العمر
    37
    المشاركات
    1,466
    الشَكر (المُعطى)
    59
    الشَكر (المُستلَم)
    189
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    4 مواضيع
    معدل تقييم المستوى
    51

    افتراضي

    اقتباس المشاركة الأصلية كتبت بواسطة mafea55 مشاهدة المشاركة
    ~~~ Unlock K1/Z3 without TP ~~~





    You will need: -




    6. Select the file "K1__BOOTCORE_TP.bkp" for K1 or "Z3__BOOTCORE_TP.bkp" for Z3;


    9. In mstool click "Write Backup";


    10. Select bootloader 0A.B2 for k1 and 0A.C0 for Z3;


    !





    معكم بكل جديد:_mafea55
    كلام سليم وانا مجرب الطريقة دي ونجحت لانو البوت الي عل تليفون بيقبل البوت داوفي نسبة 75% من التليفونات مش رح تقبل وبعد ا تنزلا حتبقى عايز سمارت كليب مع سمارت تست بوينت
    مشكوووووور اخي دا لتنبيه

  3. #3
    .: جيماوي جديد :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    Apr 2008
    المشاركات
    12
    الشَكر (المُعطى)
    0
    الشَكر (المُستلَم)
    0
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    33

    افتراضي

    بس السايد مش شغال

الكلمات الدلالية لهذا الموضوع

المفضلات

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •