New version of Phoenix - Phoenix_Service_Software_2011_14_3_45843

كود:
1.  CHANGE HISTORY Version 1: 09.05.2011 Initial version
2.  INTRODUCTION 
  Main component versions in the release: 
  • DK2 Driver Version 07.14.0.25   
• Nokia Connectivity Cable USB Driver Version 7.1.40.0 
  • Flash Update Package 2011.16.000   
• FLS-x Drivers Version 2.09.28   
• FUSE Connection Manager v 2011.13 

   3.  MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2011.8.5.45529 
  New Products added   
• RM-776, RM-775, RM-763, RM-773, RM-670, RM-765, RM-774 
  New features   
• New version of FUSE connection Manager   
• New version of Flash Update Package   
• New version of Autotuning components   
• New version of Product API   
• New version of Connectivity Cable Driver 
  • Torque Information - menu implemented.  Information    concerning screw tightening torques can be shown if product specific    data package contains pictures / information files   
• Simple Multi Software Updater UI added 
  Error Corrections & changes   
• Improvements to Smart Card Activator: User is now asked to wait during the delay when smart card data is being read   
• Crash file upload server correction   
• Tucson support for RM-732 and 713 implemented.  Please    note that for these products only Tucson functions can be done with    Phoenix, Care Suite must be used for all other activities. 
  Please note:   
• New common data package ******** in use.  Please see ******** SR1315 in KICS Information Center for further information. 
  • All Nokia Service Software Applications will use following ******** for product specific data:   - Windows XP: C: \ ********s and Settings \ All Users \ Application Data \ Nokia \ Packages   - Windows 7: C: \ Program Data \ Nokia \ Packages   
• During installation, Data Packages should be installed in these directories, if they install to any other ******** by default.  target folder for local data packages can be changed in the installation wizard manually   
• This version contains the latest Tucson components.  Therefore it is not necessary to use Tucson Add-On Installation Packages•    Before you start Phoenix or Care Suite installation to Windows 7 the    User Account Control (UAC) should be turned off from Windows Control    Panel settings.   
•  For more information concerning new options in "Firmware Update" -   menu  and their use, Please see ********s SR1313 and SR1659 in KICS    Information Center.   
•  Tucson operations combined with "flash" - option are now handled in   the  same way as "refurbishment", which requires Mass Memory Content   File to  be available.   
•  Do not use Flash option simultaneously with product code change for   USB  Only phones, flash phone separately with Firmware Update   
•  It is recommended to use FPS-21 flash prommer with TCPIP connection    when refurbishing USB Only - phones (RM-596 etc) due to mandatory    optional MMC file size.   
•  Connection media to FLS-5 must be configured to be "USB_FBUS", after    FLS-4 support has been removed FBUS does not work anymore with FLS-5 

  4.  KNOWN ERRORS & LIMITATIONS   
• Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept. 
• Flashing with setup FLS-5, SS-46 and product specific adapter is not supported anymore.  FLS-5 can be used with other product specific cables and adapters, but not with SS-46 Interface Adapter.   
• If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong.  This    is caused by very old DCT-4 data packages which contain Flash Update    Package and overwrite current information during installation.  If    you experience problems when updating FPS-x prommers, please check   that  Phoenix "Prommer maintenance" is looking for the files from the   correct  ******** which is "C: \ Program Files \ Common Files \ Nokia \   Tss \  Flash".  If not, Phoenix will show error "Update via ini - file failed".  In    this case, select "Update" from that Phoenix "Prommer maintenance" -    UI, browse to correct directory and select "fpsxupd.ini" for all other    prommers except the FPS-8.   
• Refurbishment flashing and product code change for RX-51 product requires SX-4 card to be available.   
• FPS-21 flashing for RX-51 works only with TCPIP connection.  FPS-21 prommer with new HW version 11 has been released to correct this.  Sales pack code is 0089J83, old HW version is not delivered anymore   
• Please refer to product specific ********s and instructions concerning the limitations of the RX-51 product   
• RX-51 flashing does not work when CU-4 is used   
• RX-51 Product Code changes work only without FLASH option, please flash phone separately   
•  When version 2010_12_8_42304 or newer with FUSE connection manager is    installed on top of older Phoenix versions, there may be an  additional   delay of several minutes when you start Phoenix for the  first time.  Please wait patiently; Phoenix will start after configuration is finished.   
• When using Data Package download functions with online connection, download times may occasionally be long.  This is not caused by Phoenix (or Care Suite).  The    download speed from online servers is occasionally is known to be   slow,  depending on how data is buffered on caching servers.   
• After you close Phoenix, it may not restart.  To rectify this:   - Use Windows Task Manager to manually shut down phoenix.exe and FuseService.exe processes, or optionally restart your PC   
•  It is not possible to program Mass Media Content file to some devices    over direct USB cable connection, due to the large size of the file.  For these models a feature called "Media Check" has been implemented.  When this type of product is connected to service software / PC via direct USB cable the refurbishment option will be disabled.  Please use a flash prommer.      To be able to use the help files in Windows 7 you need to install     Windows Help program (WinHlp32.exe) for Windows 7. Ways to locate     WinHlp32.exe:  -  Start Phoenix with online connection to Internet,   select "Help" and   "Phoenix help". Click the "Microsoft Help and   Support" website link.   Download WinHlp32 and install it.- Go to http://www.microsoft.com. Type "WinHlp32" to "Search Microsoft.com" - field. Locate  Windows Help program (WinHlp32.exe) for Windows 7 and install it  
• When using flash prommers, only one connection type to one prommer is allowed.  Please use either NFPD USB ​​or NFPD TCPIP connection to one prommer, not both connections to same prommer 

  5.  Supported operating systems and user rights   

• Windows XP Service Pack 1 or higher   
• When installing Phoenix into Win XP you must have local admin rights. 
  • When using in Win XP, user must have power user rights.   
• Windows 7 32 Bit version


download: Phoenix-Service-Software-2011.14.003.45843_Cracked