UNIVERSAL UNLOCKER FREIA V.10
[COLOR=**********]cca. 687 KB[/COLOR]
[COLOR=**********]UNLOCK C62 [/COLOR]
[COLOR=**********]53 KB[/COLOR]
UNIVERSAL UNLOCKER FREIA V.10
[COLOR=**********]cca. 687 KB[/COLOR]
[COLOR=**********]UNLOCK C62 [/COLOR]
[COLOR=**********]53 KB[/COLOR]
Uni unlocker Siemens Ksie 2 - cca. 1,19 MB
De******ion: Programme is designate above all for unblocking and backupflashes.C30, S40, C/M35 (FW 5-21), S35 (FW 5-21),C/M 35new (FW 22-25), S 35new (FW 22-25), A35/36, C45, A40, S45, ME 45, SL 42, SL 45, MT 50,6688, M50, 3118, S55, 2128, C55, 2118, 1168, A50
UNLOCK M(T)50/C45
UNLOCK C,M,S 35 & A35,36
UNLOCKER ( REPAIR WRONG SOFTWARE ) for C,S,M 35 ( FW 21-25 ), A35/36/40, SL 45, S40 ,C30, C45, S45, ME45 variant *.LOG -> *.MAP
Codes for unlocking (remove SP-lock, not the phone code) C & S 35 : cca 694 KB
De******ion: Type *#06# and the phone show you IMEI. Than open the data**** and find your code (in excel CTRL+F). This code type to the phone and the phone is immediately unlocked. This can be used only for old phones. If you didn't find your code, you have bad luck and the phone must be unlocked via cable. You can check if the phone is unlocked by inserting simcard of other operator or you can type code *#0606# (without simcard) a press "info". Please don't send me messages with questions on different imei. I have only this data****...
For Siemens C,M,S 35 (fw - 05-21) without warranty that phone will be still working). This software enables you to type the security code and it removes SP-lock (unlocks phone) : cca 24 KB (ZeeSiemensG3.exe)De******ion and istructions of use: Phone must be swiched ON a I advice you to have full charged battery. Connect the phone and run the progie. Push any key and the software begin to read info about your phone. Than it unlocks your phone. Everything takes about 7s. In the case, that after some time (e.g. fwe days) you will see the black corner in the right top of the display of your phone and you will not be able to turn ON the phone, you can repair your phone with Ziemens Workshop 1.22 (WARNING : Ziemens Workshop changes IMEI of the phone). Nevertheless, after repairing your phone (version of your phone will be FW16), use again this software and you can again remove SP-Lock (unlock). After this you can flash your phone again to the higher version of fw (e.g. FW18 or higher) and the phone will be STILL UNLOCKED (your phone will be unlocked FOREVER!). After that is everything 100% working almost forever :-)
(tested on 4pcs C,M,S 35 always connected as C35, always 100% succesful)For Axx Map Creator : cca 307 KBWith this sw you can repair phones with damaged eeprom (black square on display), you can repair it with function "Resurrect"Instructions : How to change IMEI in SIEMENS phone: 1. Open Siemens IMEI Writer.exe and choose function LOGGER,
2. Choose your phone type e.g. C (=M)35.3.Turn off the phone and connect it. Push READ PHONE and than SHORT power ON the phone (phone is logging cca 5-20s)4.Insert your new IMEI - NEW IMEI (last two digits are not shown, but will be written).5.Choose the function SAVE LOG.6.End the software.7.Open the program Siemens P35 IMEI Map Maker.exe8.Choose function IMEI CANGE - OPEN LOG - choose saved *.log9.Turn off the phone 10.Push WRITE IMEI11.SHORT push power ON button and new IMEI will be succesfuly written to the phone.12.End the software.13.Unlock the phone ..... For C,M,S 35 we advice to use ZeeSiemensG3 , which will also show your new IMEI
DONE .................
For Siemens C,M (fw-05,07,10,12,16) and S (fw-05,07,08,09,12,16,18) version 35 - unlock via cable (this software is still actualising)(remove only sp-lock) : cca 688 KBpicture
De******ion and instructions of use: For unlock with this software you need the right data cable. First: You need to know the version of software *#06# + left pad under display, the battery should be full charged and put off the simcard. Turn the phone off, connect the cable and run the program. Find the right filefor unlock (e.g.: for version fw16 for C35i choose cm35_v16.x3u). Push "DO JOBS". After the programs say "waiting for ignition, push the red "power ON" button on the phone and the phone begin to light ON and light OFF... after the phone turn the light OFF, it`s finished. WARNING: After unlocking can`t be NEVER typed Security code. If you don`t find your software version in this soft, you must try another program or you must flash your phone on another version.
For fw. 12 and lower use program x35_srv.exe (24 Kb)
For fw. > 12 use program x35_srv new.exe (43 Kb)
For Siemens C,M version 35 fw.15,16,17,18, Siemens C25 fw. 61, Siemens A35/36/40 fw.11,13 - cca 1,32 MBpicture
WARNING: In the phone you must have one of this versions! (Remember, you must push the red "power ON" button). This will unlock your phone, but you can`t type security code (it will be erased)
For Siemens A35/36/40 software for unlock fw.11-23 for DOS :For Siemens A35/36/40 - partial flash for unlocking fw25 (for software KOCI TOOL 5.30) : cca 65 KBSoftware of mr. Koci (Siemens Tool) you must find in your own on the Internet.
Also one software (graphicaly very nice, but not full working) Martech 1.7. For C,M,S35 fw 05-18 : cca 243 KBpicture
Some data files for this software are destructional, so you can`t download it from my ***. Who destroy his phone by this software can repair it with Ziemens Workshop 1.22
For Siemens C,M,S version 35 (FW 05-20>), A3x (11-20) for WIN (Ziemens x3x Workshop 1.22) - unlocks and removes security code : 3,65 MBpicture
This software can also repair phones destroyed during full flashing with Martech v.1.7 (writing into EEPROM). I have tested it on 5 pieces of C35 (fw.16-18) and it`s realy super. It can also know if the phone is unlocked. With this software you can also downgrade your phone on lower FW version (you will have changed IMEI and SP-Lock). It can also change IMEI of the phone.x35flasher & repair : cca. 32 KBRepair bin for S35 - Ziemens 1.22 - cca.1,59 MBRepair bin for CM35 - Ziemens 1.22 - cca.1,56 MBRepair bin for A35/36/40 - Ziemens 1.22 - cca. 518 KBUse Ziemens 1.22 , Total flasher x35 and UniSiemens Professional 4.00 ( files c3r and bin are same )Siemens battery tool - new v. 1.3 : cca. 604 KbSiemens SL45 - software for unlock
This software was tested by few peoples from GSM forum and is working. Thank to all peoples who send me report : 432 KB
Siemens C25,S25 - software for unlocking and repairing software
De******ion and instructions of use: For unlocking by this soft you need the right data cable. First: battery should be full charged and you should put off simcard. Turn the phone OFF, connect cable, turn the phone ON and run the program. For unlocking push the "Clear SP-LOCK" button. The phone lights ON and lights OFF, the software types some numbers on the display of the phone, than you will see on the display of the phone "INCORECT" and than you will see "Insert SIM card". Than you must turn OFF the phone, remove battery and turn ON the phone. It`s done...
Siemens C and S version 25 - unlock (fw.C 08-53, S 05-44) also repair the software (fw.C 43-53) via cable : cca 299 KBpicture
Next repair tool : cca.1,13 MB
Firmware 61 C25 can`t be repaired. My advice is: Do not any testings with this fw version (except unlocking).For C25 FW 61: cca 136 KBSiemens C30 - software for unlocking with CZ ********
De******ion and instructions of use: I can`t test it, but the person who send it to me have unlocked some phones with this software : cca 1,38 MB
DO NOT USE FUNCTION READ PHONE !!!TOOLS:
Driver for connection PC (data modem) : cca 1 KB
You can use it for all this phones (all versions) : SL45, S45, ME45, C45,
C35, M35, S35, A35, A36, A40, C30
لبيك اللهم لبيك ، لبيك لا شريك لك لبيك ، ان الحمد والنعمة لك والملك ، لا شريك لك
شكرا حبيبى لمرورك
شكرا حبيبى
التعديل الأخير تم بواسطة ابوفياض ; 18-07-2008 الساعة 03:19 PM
الف الف الف الف الف الف شكر
مشكوور على الموضوع..............................
الف شكرررررررررررررررررر
الف شكرررررررررررر
المفضلات