11.03.2011 CDMA Huawei C5005 Unbrick – Repair supported
Resurrecting Huawei C5005 is simple. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Resurrector re-flashes only firmware zone of the phone (0×000000 to 0xBFFFFF).
To resurrect Huawei C5005:
Solder JTAG cable to Huawei C5005 JTAG pads; Insert USB Data cable into board and PC; Make sure Huawei C5005 is selected in the list of models; Click Resurrect button; Wait till software signals a successful operation completion; De-solder JTAG wires;
المفضلات