مشكلة في تفليش 1650
Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
UPP ID: 2292 [HW_UNKNOWN]
rm305_05.800, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0001327E @ 0x01000000, AMD, SectorSize: 128kB, Ext: 00437221
Signature: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x0001327E (128Mbits), Rev: 7.4.79.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,02V
MSID-Crypted: 841C6B155F7E344797DA12216A
MSID-Plain: 3E4EBAE9008B1DCBA8000000
FAID-Crypted: C94BF302462009FE24C3D5D4
Flashbus Write baud set to 6.50Mbits
4 Region(s) to erase
Erasing NOR Region [0x01000000-0x0100FFFF]
Erasing NOR Region [0x01010000-0x0179FFFF]
Erasing NOR Region [0x017A0000-0x017EFFFF]
Erasing NOR Region [0x01F00000-0x01FDFFFF]
Erase taken 39.953s
Writing 151 blocks...
All blocks written OK! Time taken 52.859s
Terminating flash session
Box VPP disabled
Booting UPP...
Box VPP disabled
Processing Flash Image Failed -> UPP Not Responding
Failed to Flash -> Problem with processing PPM Image file