HTC /-
qTek 2020-9090-S100 e Xda-Mda-O2-iMate etc
Press and hold the power button and use the stylus to press the soft reset button at the bottom of the unit at
the same time
HTC Wizard(qTek 9100 e i-Mate K-Jam, O2.. etc
Press and hold the Comm.Manager button along with Voice Command button.
While pressing the two button on the device, use the stylus to press and hold the reset button on the side.
HTC Prophet (Qtek S200,Imate JASmin etc
Press and hold the CAMERA and COMM MANAGER buttons, and use the stylus to press the RESET button.
Holds the CAMERA and COMM MANAGER buttons until the following message is displayed: “Press Send to restore
factory default or press other key to quit".
HTC TyTN(Hermes,Qtek9600,JasJam etc
Always switch off the device before to execute a full reset. The full reset is the Hard Reset of the device an to
execute it push and hold at same time both the SoftKey left and right on the front of the unit while you use the
stylus to press the soft reset button at the bottom of the device.
HTC Universal(qTek 9000 e i-Mate JasJar, Mda Pro..) etc
Press with the fingers the two keys the same time and keep them pressed. In addition by the stylus
press the pin into the RESET opening on the back of the device. Thence pressing 0 button confirm the Hard reset
or, using 'x', choice to not perform the Hard Reset.
(be careful to execute an hard reset under WM 5.0 read device's manual before)
HTC P3300 Artemis - HTC P3600 Trinity - HTC P3350 Love
Press and hold left and right button - SOFTKEY and using the stylus press the RESET command of the device.
Release the stylus, but hold the above buttons and release them when the screen shows the following message:
“Press SEND to restore manufacturer default, or press ..................”
Now you can press the required butto green call icon