قائمة الاعضاء المشار اليهم

صفحة 1 من 3 123 الأخيرةالأخيرة
النتائج 1 إلى 10 من 23

الموضوع: All Hard Reset for Pocket Pc

  1. #1
    .::Super ELiTE::.
    الصورة الرمزية winzou

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2007
    الدولة
    تـونــس
    العمر
    41
    Phone
    IPHone + SE K800i
    المشاركات
    2,798
    الشَكر (المُعطى)
    1930
    الشَكر (المُستلَم)
    6064
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    1
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    2 مواضيع
    معدل تقييم المستوى
    65

    Arrow All Hard Reset for Pocket Pc

    All Hard Reset for Pocket Pc

    All Hard Reset for Pocket Pc


    في هذا الموضوع جمعت لكم كافة الطرق لعمل الهارد ريست Hard Reset لكافة أنواع الآي ميت والبوكيت بي سي



    Performing a hard reset, all settings, records and programs stored in the Pda
    (except the ones stored in Rom) will be erased.
    After a Hard Reset formats, preferences, and other settings will be restored
    to the factory default settings.
    You can restore any previous data if you got a Backup of your device before
    the hard reset otherwise you will need to reinstall any third-party applications.
    If you are hard resetting your device owing to some hard problem i suggest
    to restores installed applications without using the backup if you are not sure
    that backup data do not include the problem you wish to solve also.
    In few words a hard reset allows you to start everything over from scratch.

    WARNING: for
    WM 5.0 users (wrongly called also as WM 2005)
    The new operative system ******s Mobile 5.0 totally modified the use and the construction of the
    internal memory of the PDA. For all the models that use this new O.S. the Ram is used only as the
    operative memory while the users' programs before loaded into the same kind of memory are now
    stored in Rom (or FRom, FlashRom etc) that is working now as an HD and is no longer subject to
    the lost of data following a full discharge of battery.
    What said above causes a possible different execution of the usual HardReset operation.
    We can note that, while the soft reset is still unchanged, for the classic Hard Reset, that resumes
    the original default setting, has been added new processes with different name and result quite
    different from the hard reset as usually known.
    We may say something like the Warm reset of Palm already used.
    So for any new pda will be added the new procedure if any (the one that is different from the
    classic Hard Reset ) and it will be shown by a different colour.

    ATTENTION: The soft reset requires only to push a button and the only
    difference is the place where this button is located.
    It is not so easy to perform an Hard Reset as, in many cases
    each group of devices has its own procedure and buttons
    ********s.
    To try to make it easy the instructions are shown quoting the relative devices:

    AUDIOVOX /-
    1032C Maestro

    Press the power button while pressing and holding the reset switch with the stylus, and then release the power
    button. When a screen appears, release the reset switch. When initialization is completed, the Welcome screen
    appears. Set up the system as in the case of startup process.


    ACER /-
    n10/n20/n30

    for the soft reset note that these model have the button in different places (at the bottom, rear or side).
    To perform an hard reset you need instead to to toggle the reset switch to the left and back to the right.
    The reset switch is usually at the bottom of the devices except for n20 model for which you have to remove battery
    as the reset switch is located in the right side of the battery bay.
    n50
    For this model to perform a soft reset use the tip of the stylus to press the reset button inside the hole on the left
    side of the unit. To perform an hard reset, while holding the Today and Messaging buttons, press the reset button
    inside the hole as detailed above.

    n300
    While holding pressed the Messaging and Today buttons in front of the device, press the reset button into the hole
    at the bottom of the handheld.


    ASUS /-
    MyPAL 620

    Press and hold at the same time the button 3 (Contact) and the stylus in the "Reset" button located on the right
    of MyPal to access to "BIOS" . Using the stylus press the button "Reset" and all is done.
    It appears that there is another way to perform an Hard Reset on this device. Push and hold power button and
    press the reset button and all is done





  2. الشَكر abdoaichi شَكر

  3. تاريخ التسجيل
    Always
    الدولة
    Advertising world
    العمر
    2010
    المشاركات
    Many

  4. #2
    .::Super ELiTE::.
    الصورة الرمزية winzou

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2007
    الدولة
    تـونــس
    العمر
    41
    Phone
    IPHone + SE K800i
    المشاركات
    2,798
    الشَكر (المُعطى)
    1930
    الشَكر (المُستلَم)
    6064
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    1
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    2 مواضيع
    معدل تقييم المستوى
    65

    افتراضي

    a716
    This device has in the space under the battery a little switch that you can move to disable the Backup battery.
    As to reach the switch you removed the main battery, this action performs an Hard Reset.
    (this is another way along with the mutiple buttons to avoid accidental hard resets)

    a730
    You can use the second procedure mentioned above for the a620, I.E.
    To press the power button and at the same time the soft reset button using the stylus.

    a632/a636
    To perform an Hard reset press and hold the power button while you press the tip of your stylus on the reset
    switch at the bottom. This will cancell all data that unit is elaborating reinstating the device to the default setting
    of the watch.
    To perform a Clean Boot (that really coorrespond to a true Hard Reset), press the Speaker (-) button and at the
    same time the button Change Modality and also the stylus on the reset button. This will reinstate the device to the
    original default setting.

    a626/a686/a696
    To perform a clean reset, press the launch button simultaneously pressing the stylus on the reset button. Then
    when a warning message appears follow the instructions and press to do clean reset, or press to leave the
    operation screen. Performing a clean reset will delete all data.

    Mars II/(O2 xda Zinc)
    To perform a hard reset, use the stylus to reach the reset button found besides the device's camera button.
    Keep the stylus on the reset button and press the Up Navigation button at the same time.

    P535 - P735
    To restore default settings tap Start > Settings > System tab > Default Settings.
    Input ‘1234’ in password field and tap Ok confirm that you want to restore the default settings.
    You can also perform the hard reset by pressing the UP button of the navigation key and the reset button at
    the same time.

    P550
    To restore default settings tap Start > Settings > System tab > Default Settings.
    Input 1234 in password field and tap Ok confirm that you want to restore the default settings.
    You can also perform the hard reset by pressing the UP button of the navigation key and the power button at
    the same time

  5. #3
    .::Super ELiTE::.
    الصورة الرمزية winzou

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2007
    الدولة
    تـونــس
    العمر
    41
    Phone
    IPHone + SE K800i
    المشاركات
    2,798
    الشَكر (المُعطى)
    1930
    الشَكر (المُستلَم)
    6064
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    1
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    2 مواضيع
    معدل تقييم المستوى
    65

    افتراضي

    BENQ /-
    P50
    Press and hold power button. At the same time use the stylus to press the recessed Reset button.
    When the screen has faded off release both buttons and when the power indicator light up green press the power
    button to restart the unit.

    CASIO /-
    E-115/125 & EM-500
    The procedure is less authomatized than the others. Remove the CompactFlash card and power on the unit.
    Holding down the power button, use the stylus to press the reset button for about 2 seconds.
    You will see shown on the screen: "Proceeding with this operation initializes memory. Press (Action) to proceed
    or (Start) to cancel". Press the (Action) option to perform the Reset.

    CLIE Sony
    Connect the CLIE handheld using the AC adapter and take out the stylus pin by twisting the upper part of the stylus.
    Push down and hold the power button of the unit and use the stylus to slowly press and release the reset button on
    the back.
    When the Palm screen will appear release the power button. At the "Erase all data?" prompt, push the upper part of
    the scroll button on the front of the device to confirm OK. The Sony pda is now resetted and you have only to follow
    the SetUp steps as prompted.


    COMPAQ
    Aero 15xx Series
    Remove both the main and backup battery, wait at least 1 minute, then replace the batteries.
    Backup Battery on the left side

  6. #4
    .::Super ELiTE::.
    الصورة الرمزية winzou

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2007
    الدولة
    تـونــس
    العمر
    41
    Phone
    IPHone + SE K800i
    المشاركات
    2,798
    الشَكر (المُعطى)
    1930
    الشَكر (المُستلَم)
    6064
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    1
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    2 مواضيع
    معدل تقييم المستوى
    65

    افتراضي

    iPaq 3600, 3700 Series
    bottom
    Press the recessed soft reset button in the hole on the bottom right for more than 3 seconds to perform a hard reset.
    You can also perform a hard reset opening the door on the bottom left of the device and moving the switch behind
    the door to obtain the same result
    iPAQ H3800/H3900/5450/5500
    To perform a hard reset first remove the expansion packs if any, thence turn the device on (not connected to AC
    power) and press

    hold two outside buttons ( 1 Calendar and 4 iPAQ Task ), also insert stylus into
    the reset button at bottom of iPAQ and pressing and holding this for 5 secs. Release the above buttons in any
    sequence. To reactivate iPAQ, insert stylus into soft reset button or simply connect iPaq to AC adapter.


    DELL /-
    Axim x5/ X3i
    Another procedure a little more involved than the others.Press and hold the Power Button thence, using the stylus
    press and hold the reset button on the left side of the unit until the message "To clear all data press the Contacts
    button" is shown.
    Press the required button located to the left of the directional pad. When you see the message "Tap the screen to
    set up your Pocket PC" execute the requested action and follow the instructions on screen to set up your PDA again

    Axim X30 / X50
    To perform an hard reset press and hold the Power button and at the same time the Reset button by the stylus
    for about 2 seconds. Follow the instructions shown.

    Axim X51
    To perform an hard reset press and hold the Power button and at the same time the Reset button by the stylus
    Release the 2 buttons and you will see on the screen the instructions To clear all data in the memory
    Press Contacts button to complete the hard reset. Otherwise press Mail button to cancel the operation.


    ETEN /-(glofiish)
    m500
    Press and hold the power button and at the same time press, using the stylus, the Reset button on the device's side.
    M600 - G500
    Press and hold the power button and at the same time press,using the stylus, the Reset button on the device's side.
    Release both buttons at the same time and reply YES to the questions to cancel registry and to reinstall default
    settings.

    X500
    Hold the “Power Button” and press the “Reset Button” with the stylus, and release both buttons simultaneously.
    Next, hold the End Button until the system inquiry screen is displayed, then release the End Button and answer the
    question

  7. #5
    .::Super ELiTE::.
    الصورة الرمزية winzou

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2007
    الدولة
    تـونــس
    العمر
    41
    Phone
    IPHone + SE K800i
    المشاركات
    2,798
    الشَكر (المُعطى)
    1930
    الشَكر (المُستلَم)
    6064
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    1
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    2 مواضيع
    معدل تقييم المستوى
    65

    افتراضي

    M700
    Hold the Power button and press the Reset button using the stylus. Release both buttons at the same time and
    next press the 'End Button' until the inquiry screen appears. Reply to the question.

    x500+
    If the touch screen is functional then tap Programs> Utilities and than Default Setting.
    Otherwise Hold the “Power Button” and press the “Reset Button” with the stylus, and release both buttons
    simultaneously. Next, hold the End Button until the system inquiry screen is displayed, then release the End Button
    and answer the question(s) to perform a clean boot (Hard Reset).

    x800
    To perform a Clean Boot(Hard Reset) hold the “Power Button” and press once on the “Reset Button” with the
    tip of the stylus, and release both buttons simultaneously. Next, continually hold the End Button until the
    system inquiry screen is displayed, then release the End Button. Answer the question(s).


    FUJITSU-SIEMENS /-
    Loox 400 series
    Simultaneously press reset button at the bottom using stylus cap and the Suspend/Resume button on top front
    of the unit. After about 10 seconds a pictures will appear on th screen and a tone sounds

    Loox 720 - 710
    Use the point into the unscrewed stylus cap to press the soft reset button at the bottom and at the same time
    press the button suspend/resume in front right corner. After about 10 seconds, when you will see a new screen
    image and you will hear an advice sound, follows the relative
    instruction.
    Loox n500/520
    Take the stylus and screw it apart.
    Press the tip into the soft reset opening and at the same time the suspend/resume and calendar buttons
    Hold the suspend/resume and the calendar button pressed for a few seconds. The reset can take a few minutes.
    A signal is sounded after the reset is complete. Follow the instructions

    T830/T810
    Slide off the battery cover and quickly remove an then refit main battery. Wait few seconds and athe same time
    press the End button and the Reset button using the stylus tip. The screen will show some options.
    Select SKIP to perform a normal cold start, or Factory Defaults if you confirm to performe an Hard Reset.
    When a signal will sound follow the instructions on the screen


  8. #6
    .::Super ELiTE::.
    الصورة الرمزية winzou

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2007
    الدولة
    تـونــس
    العمر
    41
    Phone
    IPHone + SE K800i
    المشاركات
    2,798
    الشَكر (المُعطى)
    1930
    الشَكر (المُستلَم)
    6064
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    1
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    2 مواضيع
    معدل تقييم المستوى
    65

    افتراضي

    GARMIN /-
    iQue 3000
    press the reset button on the unit's back. Immediatly after press and hold the Power button until you see the
    Palm Logo. Then release the Power button. You will see on the screen a message advising you are about to erase
    all unit's data. Now you can press the upper half of the scroll button in front of the device to confirm the hard
    reset or any other button to execute a simple reset instead.


    GIGABYTE /-
    g-Smart (i.Bond) Press the power button on the top and on the keypad press 7 and 9 (three buttons together)
    It will display "formating" (Hardreset)

    HANDSPRING
    Hold down the power button on the front panel of your handheld. Holding down the power button, press the reset
    button by paper clip. As soon as you see the logo on the screen, release the power button.
    Press the up scroll button on the front panel to perform a hard reset or press any other button to perform a soft
    reset. You can restore backed up data by performing a HotSync operation.


    HP /-
    Jornada 520, 525, 540, 545, 547, and 548
    Press and hold the soft reset button and press the power button.
    Jornada 564, 565, 567, and 568
    Perform a soft reset using the button on the back of the device, thence remove the main and backup battery for
    some minutes. (The backup battery is locked on the left side of the device)

    iPaq 19xx Series
    These devices can be hard reset by pressing and holding the soft recessed button on the left-hand side of the
    device while you are pressing and holding the power button at the top the unit. Keep buttons pressed for several
    seconds until the screen fades.

    iPaq 22xx Series
    Press and hold Buttons 1 (Calendar) and 4 (iTask) on the front of the device and, at the same time, press the Reset
    button on the back of the Pocket PC using the device's stylus.
    Hold thel buttons until the screen begins to fade (about 3/4 secs). Release the buttons and stylus. If the device
    has been fully reset, it does not power on and you must reactivate its battery connecting the same to the AC power
    or pressng the usual soft reset button with the stylus.


    Note: The iPAQ 19xx & 22xx series have a feature called "iPAQ
    File Store" allowing to store some data and programs in
    the Flash ROM. If you used this option, the hard reset will
    not cancel the data stored therein. Moreover if this area
    become garbled you risk to have to reflash the Rom.
    Do not store date exceeding its storage's space.


    iPaq 41xx Series
    Press and hold the Power button and at the same time press Reset button in the device's back using the stylus.
    Release first the power button , thence the Reset button and you will see the device to reset and to power on
    again with original setting
    .

  9. #7
    .::Super ELiTE::.
    الصورة الرمزية winzou

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2007
    الدولة
    تـونــس
    العمر
    41
    Phone
    IPHone + SE K800i
    المشاركات
    2,798
    الشَكر (المُعطى)
    1930
    الشَكر (المُستلَم)
    6064
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    1
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    2 مواضيع
    معدل تقييم المستوى
    65

    افتراضي

    iPaq rz17xx, rx31xx, rx34xx, rx37xx series
    Press and hold the extreme left button (Mobile Media) and the extreme right button (iTasks) at the same time and
    use the stylus to press the reset button at the bottom of the unit. When the screen fades release the two buttons
    and button under the stylus. If the unit does not power on authomatically perform a simple soft reset.

    iPaq hx4700
    Press and hold calendar and iTask buttons in the front area, while, holding down the buttons, press using the stylus
    the reset button on the bottom for about 2 seconds.

    iPaq hx2750
    press and hold button 1 and 4 on the front of the device and at the same time use the stylus to press reset button
    on the bottom of the ipaq.

    iPaq h6300
    Press and hold the Power button for about 3 seconds while at the same time you press by the stylus the reset
    button on the left side of the unit. When the screen blanks release both the buttons and wait that the device
    powers on.

    iPaq rx1950
    To perform a clean reset and return you HP iPAQ to factory settings press and hold the calendar and the iPaq
    Wireless buttons. While holding down the buttons lighttly press the Reset button by the stylus for about 2 seconds.
    When the HP iPAQ screen begins to fade, release the two first buttons and then remove the stylus.
    Plug the device into AC adapter o press Reset button again to restart unit.

    hx2000 series (not h2210
    Press and hold down Calendar and iTask buttons. While holding down these buttons, use the stylus to press the
    Reset button on the bottom of the iPAQ for about two seconds. When the Pocket PC screen begins to fade, release
    the mentioned two buttons first, and then remove also the stylus from the Reset.

    hw6500 series
    To perform an hard reset hold down the Power button and use the stylus to press the recessed Reset button on
    the bottom for about five seconds. The screen fades and the device resets. Once the device resets and the screen
    comes back on, release the Power button and remove the stylus from the Reset.

    hw69xx series
    To perform an Hard(clean) Reset press and hold the Answer/Send, Power, and End Call buttons. While holding these
    buttons, by the stylus press the Reset button on the bottom of the iPAQ until the device restarts.
    When the HP iPAQ restarts, release all of the buttons, Reset button included.

    rw 68xx series
    To perform an Hard(clean) reset and return your HP iPAQ to factory settings:
    1. Press and hold the Answer/Send, Power, and End Call buttons.
    2. While holding these buttons, use the stylus to lightly press the Reset button on the bottom of the HP iPAQ
    until the device restarts.
    3. When the HP iPAQ restarts, release all of the buttons, and then remove the stylus from the Reset button.

    rx 57xx/59xx
    To perform an Hard Reset(called factory reset) press and hold the Quick Launch and Rotate Screen buttons.
    While holding these buttons, use the stylus to press the Reset button until the device restarts.
    When the HP iPAQ restarts, release all of the buttons, and remove the stylus from the Reset button

  10. #8
    .:: المدير العام ::.
    الصورة الرمزية NUOR*GSM SYRIA

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2007
    الدولة
    syria
    Sonork
    100.1625155
    Phone
    iphone 7
    المشاركات
    17,071
    الشَكر (المُعطى)
    11076
    الشَكر (المُستلَم)
    15271
    الإعجاب (المُعطى)
    42
    الإعجاب (المُستلَم)
    436
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    1
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    145 مواضيع
    معدل تقييم المستوى
    636

    افتراضي

    مشكور حبيب قلبي بس يا ريت شرح باللغة العربية
    GEM-FLASH.com First Arabic Support For All Arabic Mobiles FLASH Files
    سبورت الجيم فلاش Home Page | GEM Flash Firmware Download
    منتدي الجيم فلاش http://www.gem-flash.com/vb/
    متجر الجيم فلاش http://store.gem-flash.com
    سيرفر الجيم فلاش http://www.gem-flash.org
    للاشتراك في سبورت الجيم فلاش التواصل على حسابي على الفيس بوك
    https://www.facebook.com/NUOR.GEM

  11. #9
    .::Super ELiTE::.
    الصورة الرمزية winzou

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2007
    الدولة
    تـونــس
    العمر
    41
    Phone
    IPHone + SE K800i
    المشاركات
    2,798
    الشَكر (المُعطى)
    1930
    الشَكر (المُستلَم)
    6064
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    1
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    2 مواضيع
    معدل تقييم المستوى
    65

    افتراضي

    HTC /-
    qTek 2020-9090-S100 e Xda-Mda-O2-iMate etc
    Press and hold the power button and use the stylus to press the soft reset button at the bottom of the unit at
    the same time

    HTC Wizard(qTek 9100 e i-Mate K-Jam, O2.. etc
    Press and hold the Comm.Manager button along with Voice Command button.
    While pressing the two button on the device, use the stylus to press and hold the reset button on the side.

    HTC Prophet (Qtek S200,Imate JASmin etc
    Press and hold the CAMERA and COMM MANAGER buttons, and use the stylus to press the RESET button.
    Holds the CAMERA and COMM MANAGER buttons until the following message is displayed: “Press Send to restore
    factory default or press other key to quit".

    HTC TyTN(Hermes,Qtek9600,JasJam etc
    Always switch off the device before to execute a full reset. The full reset is the Hard Reset of the device an to
    execute it push and hold at same time both the SoftKey left and right on the front of the unit while you use the
    stylus to press the soft reset button at the bottom of the device.

    HTC Universal(qTek 9000 e i-Mate JasJar, Mda Pro..) etc
    Press with the fingers the two keys the same time and keep them pressed. In addition by the stylus
    press the pin into the RESET opening on the back of the device. Thence pressing 0 button confirm the Hard reset
    or, using 'x', choice to not perform the Hard Reset.
    (be careful to execute an hard reset under WM 5.0 read device's manual before)

    HTC P3300 Artemis - HTC P3600 Trinity - HTC P3350 Love
    Press and hold left and right button - SOFTKEY and using the stylus press the RESET command of the device.
    Release the stylus, but hold the above buttons and release them when the screen shows the following message:
    “Press SEND to restore manufacturer default, or press ..................”
    Now you can press the required butto green call icon

  12. #10
    .::Super ELiTE::.
    الصورة الرمزية winzou

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2007
    الدولة
    تـونــس
    العمر
    41
    Phone
    IPHone + SE K800i
    المشاركات
    2,798
    الشَكر (المُعطى)
    1930
    الشَكر (المُستلَم)
    6064
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    1
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    2 مواضيع
    معدل تقييم المستوى
    65

    افتراضي

    HTC P3400 Gene
    To perform a hard reset (Full Reset) press and hold the left SOFT KEY and the right SOFT KEY, and at the same
    time, use the stylus to press the RESET button at the middle left side of your device.
    Release the stylus, but continue pressing the two SOFT KEYs until you see the following message on the screen:
    This operation will delete all your personal data, and reset
    all settings to manufacturer default. Press Send to restore
    manufacturer default, or press other keys to cancel.
    Release now the two SOFT KEYs, and then press the TALK (Send) button

    HTC P4350
    Press and hold the left and right SOFT KEY, and at the same time, press the RESET button by the stylus.
    Release the stylus, but continue pressing the two SOFT KEYs until you see the following message:
    ''This operation will delete all your personal data, and reset all settings to manufacturer default......''
    Release the two SOFT KEYs, and then press the SEND button

    HTC X7500/7501-(ATHENA/ADVANTAGE/Dopod U1000/T.Mobile AMEO
    Slide the Volume slider down and at the same time, use the stylus to press the RESET button at the back of your
    device. After a brief period of time, two choices will appear on-screen. Press the CENTER OK button to perform the
    hard reset. (Otherwise, if any, press the CAMERA button to exit.)

    HTC S620 Excalibur (T.Mobile Dash, Dopod C720W) - HTC S710 Vox
    click Start > Expert > Cancel memory to performe an Hard Reset and follow the instructions shown on the screen.
    The smartphone will restart immediately after the reset.
    HTC Startrek Qtek 8500 (iMate SmartFlip/Qtek 8500/Star100/Dopod S300/Cingular 3125)
    To reset the smartphone click Start > Accessories > Clear Storage. Follow the on-screen instructions to hard reset
    The phone will restart after the reset.

    HTC Touch Elf
    . Press and hold the TALK and END buttons, and at the same time, use the stylus to press the RESET button at the
    bottom of your device. Release the stylus, but continue pressing the above buttons until you see the following
    message on the screen:
    "This operation will delete all your personal data, and reset all settings to manufacturer default.
    Press Action to restore manufacturer default, or press other keys to cancel."
    Release the TALK and END buttons, and then press ENTER on your device.
    Clear Storage
    Another way of clearing the device storage and reset all setings back to factory default settings is to use the
    Clear Storage feature. You will lose all your data and files on the device storage when you use Clear Storage, so
    make sure to do a backup first.
    Tap Start > Settings > System tab > Clear Storage. Enter “1234” then tap Yes

صفحة 1 من 3 123 الأخيرةالأخيرة

الكلمات الدلالية لهذا الموضوع

المفضلات

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •