generic customization for A1,A2 phones, custpack info was broken, fixed
old batch of smartcards was ignored, fixed
حمل من هنا
التحديث ليس فيه شئ جديد سوي بعض الاصلاحات
generic customization for A1,A2 phones, custpack info was broken, fixed
old batch of smartcards was ignored, fixed
حمل من هنا
التحديث ليس فيه شئ جديد سوي بعض الاصلاحات
ربما تثبت الأيام القادمة اني كنت علي حق وربما تثبت اني كنت الأغبي علي الاطلاق. والي ان تأتي الأيام القادمة ليس امامي الا الصبر
-----
مافيش حد بيشتغل لصالح هذه البلد ابدا
anybody with locked or not locked x10i,x10a,so-01b, please come here
Greetings.
lets make some tests.
1.
make sure your x10i,x10a have standard semc android 2.1 firmware.
if not, flash such firmware.
2.
go to
menu->settings->applications->development->enable usb debugging, check it.
install "adb drivers" ( drivers\adb_drivers\x10_drivers )
3.
power off phone.
go to pda tab, select x10 as model, on options check "signed mode,altbypass mode,do full unlock instead usercode reset", fill any valid username/password.
press unlock.
when prompted detach phone, turn it on fully, connect it again.
( or you can leave phone on cable, then power it on manually )
DO NOT DETACH PHONE FROM AFTER PROCEDURE STARTED, YOU CAN KILL YOUR PHONE, ONLY RIFF JTAG WILL HELP
DO NOT REMOVE BATTERY FROM PHONE AFTER PROCEDURE STARTED, YOU CAN KILL YOUR PHONE, ONLY RIFF JTAG WILL HELP
https://rapidshare.com/files/573768306/v1.1094.rar
please take in account, that it is testing version, it works for my x10, however, we should test it on other phones.
( during testing period, 0 credits required to unlock x10i using altbypass method. )
(سبحان الله وبحمده .. سبحان الله العظيم)قال الله تعالى : {مَا يَلْفِظُ مِن قَوْلٍ إِلَّا لَدَيْهِ رَقِيبٌ عَتِيدٌ}اعتزر للجميع عن قلة متابعتى وذلك بسبب انشغالى بتطوير السبورتمنتدى عربي سبورت عربي جيم فلاش / هوستينج العرب
Greetings.
Let's make some tests.
1.
download setool2 v1.1099
https://rapidshare.com/files/3246771165/v1.1099.rar
2.
make sure you have firmware with android 2.x, NOT 1.6.
flash required firmware, if needed.
3.
power on phone without sim card, go to menu->settings->applications->development, enable "usb debugging"
connect phone to PC, install drivers from setool2 v1.1099 distr ( drivers\ADB_Drivers)
hint:
i suggest to import DisableADBNumbering.reg, however that is not required.
4.
select proper phone model.
on settings check signed mode, use alternative security bypass, do full unlock instead usercode reset
press unlock
follow program directions.
hint:
when program tells "warming up...", manually power on phone fully, cause it will automatically enter charging mode.
after you see "GETTING ROOT ACCESS ..." DO NOT TOUCH PHONE until procedure complete.
it can happen ( very unlikely, though ) that ADB server will not recognize phone after reboot, so
IF phone not detecting automatically and on status bar you can see "waiting for phone...", again - only in that case - disconnect phone from usb and connect it again, procedure should continue.
if not, well, repeat from start.
5.
during testing period procedure will be free, however testing period will be very short ( until i wake up ) and credits will be taken after that,depending on testing results.
we tested service thoroughly and all went fine, but... well, you got idea.
no any warranty, your phone can be killed,etc,etc,etc.
originally posted by
the_laser
Regards
Dynet
v1.1101
- added lt15,mt15,r800 (and other semc models based on MSM8255) unlock using alternative security bypass. check FAQ post for all details. procedure require internet access and paid.
- added pnx4910-based phones support (ck15_txt_pro at the moment). supported all standard operations, network unlock, as usual, will only work when s1 signature server will work.
- fixed ancient bug with lg3g testpoint operations [IMG]http://www.**************/vb/images/smilies/wink.gif[/IMG]
SEtool2 v1.1102 Beta test !!.
Whats new
Code:
SEtool2 v1.1102 repair phone recovery empty semcboot area.
https://rapidshare.com/#!download|65...40|v1.1102.rar
v1.1104
Quote:
- added unlock code request by IMEI.
request cost - 10 credits, turnaround maximum 3 days.
how to do:
go to LOCKS tab, fill IMEI, press "REQUEST" button.
after ~1 day, check if request done: again fill IMEI and press request.
if code will not be ready in 72 hours from request, credits will be automatically returned to account,
when user check credits information.
SETOOL2 SMARTCARD UPDATE REQUIRED, ONLY IF YOU STILL NOT DONE IT.
Download here
please re download v1.1106 from support area or from https://rapidshare.com/files/983692499/v1.1106.rar: due to hurry, 8x55 unlock was broken.
sorry for inconveniences.
GEM-FLASH[SIGPIC][/SIGPIC]Gsm.magic
- again improved recovery for 8x55-based phones. recovery of phones with totally damaged both semcboot and trim area properly supported now.
http://www.filesonic.com/file/1749230391/v1.1107.rar
التعديل الأخير تم بواسطة AhMEd TOhAMY ; 02-09-2011 الساعة 07:53 PM
- from now on, unlock by altbypass method for qsd8250,msm7227 phones will also "unlock" semcboot.
- qsd8250,msm7227 phones with "unlocked" bootloader can flash custom firmwares now
- added few models to model list, so users don't get confused
- different bugfixes, some are important.
For more info check here
SETOOL v1.1108
المفضلات