الحقوني ن96(جارى المتابعه)

[mmstafa]

فلشت على التورنادو واترتيب صحيح وطلب مني في الاجابة السابقة كتابة ملف pm هل اكتبه عن طريق التورنادو او الام اكس كي وهذه هي قراءة الجهاز على الام اكس كي

Phone Type: RM-247 (Nokia N96-1)
SW Version: V ICPR72_08w41.2 25-11-08 RM-247 (c) Nokia
Imei plain: 35932002500598-3
Product Code: 0577459
Language Pack:
- not available.
SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed


Imei net: 359320025005983
Version: SIMLOCK SERVER
Provider: Nokia Test, Country: Finland
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF

[aya]

بخصوص تفليشه على الجاف اتفضل حط اللورد ده فى فولدر الجاف
C:/program files/odeon/jaf/flash

وبخصوص الفلاشات غير ملف cnt مع ملف ape يعنى اعكسهم

بالتوفيق ان شاء الله

بعد أن عملت ما قلت نفس النتيجة
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B1, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: D:\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.1.23.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_prd.core.fpsx
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_prd.core.fpsx
PPM Flash file: D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_011.1_prd.language.fpsx
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_prd.core.fpsx
PPM Flash file: D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_011.1_prd.language.fpsx
CNT Flash file: D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_100.1_prd.uda.fpsx
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_prd.core.fpsx
PPM Flash file: D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_011.1_prd.language.fpsx
CNT Flash file: D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_100.1_prd.uda.fpsx
APE Variant file: D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_098.1_prd.customer.fpsx
Manual mode selected, version can't be checked!
Booting phone...
FAST PHONE detected!
APE Boot Data:
Asic ID: 008815D3
Asic Mode ID: 00
Asic Public ID: 9DE0F65730999CA73B30A201DAEE689B80391D11
HASH: 0BBC4203E2D3B82504C75CB65E906A3500000000
ROM ID: 137A9A3B33259D2C
CMT Boot Data:
Asic ID: 000000010000022600010006400C192101031103
Asic Mode ID: 00
Asic EM ID: 00000B22
Asic Public ID: 0F00010DE871005203AB370178FB9A201A04F057
HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE00000000
ROM ID: 4B9B75103E691FF8
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\RAPIDOv11_2nd.fg
Loader version: 09.30.00 -> Revision: 0200
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 00010000 <=> Flash -> not used
CMT Flash Data: NOT AVAILABLE
C:\Program Files\ODEON\JAF\Flash\RAPIDOv11_XSR15_alg.fg...
........Sending CMT HASH for PASUBTOC
.........................Sending CMT HASH for ALG
...........................CMT Loader Ready
APE Boot: C:\Program Files\ODEON\JAF\Flash\STn8815_2nd.fg
Loader version: 09.30.00 -> Revision: 0200
Patching APE boot step1...
Patching APE boot step2...
Patching APE boot step3...
Error loading ape boot...
أرجو المساعدة وشكراً

[hassan moamen]

[quote=mmstafa;956720]فلشت على التورنادو واترتيب صحيح وطلب مني في الاجابة السابقة كتابة ملف pm هل اكتبه عن طريق التورنادو او الام اكس كي وهذه هي قراءة الجهاز على الام اكس كي [/

QUOTE]


حالة الهاتف ايه دلوقتى ؟؟؟؟

بعد أن عملت ما قلت نفس النتيجة
P-key nokia module version 01.02
Patching APE boot step1...
Patching APE boot step2...
Patching APE boot step3...
Error loading ape boot...
أرجو المساعدة وشكراً

جربت تفلشه USB ؟؟؟؟

[mmstafa]

Phone Type: RM-247 (Nokia N96-1)
SW Version: V ICPR72_08w41.2 25-11-08 RM-247 (c) Nokia
Imei plain: 35932002500598-3
Product Code: 0543722
ApeCoreSw: 12.043
ApeVariant: 12.043, 12.043.011.1, 12.043.098.1
ApeTest: ENOSW_4032_PR11.0835_003
ApeProd: V 40.2009.39.xx PRD
ContentPack: V 40.2009.39.xx PRD
Language Pack:
- not available.
SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!


Imei net: 359320025005983
Version: SIMLOCK SERVER
Provider: Nokia Test, Country: Finland
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF

[aya]

الحمد لله والشكر من بعد الله لأخي hassan moaman الجهاز عاد للعمل بعد التفليش على usb
وهذا الأنفو على الجاف

Init usb communication...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_011.1_prd.language.fpsx
CNT Flash file: D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_100.1_prd.uda.fpsx
APE Variant file: D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_098.1_prd.customer.fpsx
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_prd.core.fpsx
PPM Flash file: D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_011.1_prd.language.fpsx
CNT Flash file: D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_100.1_prd.uda.fpsx
APE Variant file: D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_098.1_prd.customer.fpsx
Detected P-KEY: 900090C0
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending APE boot...
Loader version: 00.00.00 -> Revision: 0200
Patching APE boot step1...
Patching APE boot step2...
Patching APE boot step3...
Sending ape boot...
APE FLASHID: B1002000
Sending APE loader...
Waiting for Update Server to boot...
Sending CMT boot...
Loader version: 08.24.00 -> Revision: 0200
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT FLASHID: 04882000
Sending CMT loader...
Reading CMT papub hash...
Reading APE papub hash...
CMT blocks: 414, APE blocks: 3822
Partition CMT...
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_prd.core.fpsx...
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_011.1_prd.language.fpsx...
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_100.1_prd.uda.fpsx...
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_098.1_prd.customer.fpsx...
Partition APE...
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_prd.core.fpsx...
Sending APE partition Data...
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_011.1_prd.language.fpsx...
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_100.1_prd.uda.fpsx...
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_098.1_prd.customer.fpsx...
Erase CMT...
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_prd.core.fpsx...
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_011.1_prd.language.fpsx...
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_100.1_prd.uda.fpsx...
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_098.1_prd.customer.fpsx...
Erase APE...
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_prd.core.fpsx...
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_011.1_prd.language.fpsx...
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_100.1_prd.uda.fpsx...
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_098.1_prd.customer.fpsx...
Write CMT...
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_prd.core.fpsx...
Sending CMT HASH for NOLO
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for PASUBTOC
MATCH cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
PAPUBKEYS already sent...
PAPUBKEYS already sent...
PAPUBKEYS already sent...
PAPUBKEYS already sent...
Sending CMT HASH for UPDAPP
Sending CMT HASH for DSP0
Sending CMT HASH for MCUSW
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_011.1_prd.language.fpsx...
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_100.1_prd.uda.fpsx...
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_098.1_prd.customer.fpsx...
Write APE...
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_prd.core.fpsx...
Sending APE HASH for X-LOADER
Sending APE HASH for KEYS
Sending APE HASH for PRIMAAPP
Sending APE HASH for SOS*UPDAPP
Sending APE HASH for SOS+XZIP
Sending APE HASH for PASUBTOC
MATCH ape->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
Sending APE HASH for SOS+CORE
Sending APE HASH for SOS+ROFS1
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_011.1_prd.language.fpsx...
Sending APE HASH for SOS+ROFS2
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_100.1_prd.uda.fpsx...
Processing D:\Products\RM-247\N96_RM-247_30.101 v8\RM-247_30.101_098.1_prd.customer.fpsx...
Sending APE HASH for SOS+ROFS3
Rebooting...
Pooling phone...
Phone not found...
Second try...
MCUSW: V ICPR72_09w13.3
15-09-09
RM-247
(c) Nokia
APESW: 30.101
VariantSW: 30.10130.033.011.130.101.098.1
Prodcode: 0567376
Setting test mode...
Setting FULL FACTORY...
Operation took 0 minutes 2 seconds...
Done!
DCT4/BB5 counter: 7
Done!
Changing mode...
Detected P-KEY: \\\\\\\
P-key nokia module version 01.02
Init usb communication...
Done!

[mmstafa]

قمت بالتفليش مرة اخر بنفس الفيرجن على التورنادو وبقي الجهاز لا يكمل الاقلاع فقط كلمة نوكيا ثم يطفى وهذه هي القراءة على الام اكس كي وانا لا املك الجاف الرجا الرجاء الاجابة
Phone Type: RM-247 (Nokia N96-1)
SW Version: V ICPR72_08w41.2 25-11-08 RM-247 (c) Nokia
Imei plain: 35932002500598-3
Product Code: 0543722
ApeCoreSw: 12.043
Language Pack:
- not available.
SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!


Imei net: 359320025005983
Version: SIMLOCK SERVER
Provider: Nokia Test, Country: Finland
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF

[ابو عزيز]

انت بحاجة الى كتابة pm عن طريق الام اكس كي وهذه الرسالة معناها SECURITY_TEST failed! انت بحاجة الى كتابة pm

[mmstafa]

عفوا قبل التفليش قمت بكتابة ملف الpm بلا sk4على الام اكس كي واصبح الجهاز لا يكمل الاقلاع فقمت باعادة تفليشه بنفس الفيرجن وبقيت القراءة على الام اكس كي على حالها وعاد الجهاز يعطي اتصل بالبائع وهذه هي القراءة على الام اكس كي
Phone Type: RM-247 (Nokia N96-1)
SW Version: V ICPR72_08w41.2 25-11-08 RM-247 (c) Nokia
Imei plain: 35932002500598-3
Product Code: 0543722
ApeCoreSw: 12.043
Language Pack:
- not available.
SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!


Imei net: 359320025005983
Version: SIMLOCK SERVER
Provider: Nokia Test, Country: Finland
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
الرجاء الرجاء المتابعة منكم يا خبراء

[bety]

اخي اعمل باتش عن طريق mx key و انشاء الله تنحل المشكله طبعا مع ريست اوول و فورمات

[mmstafa]

ماهي طريقة عمل الباتش على الام اكس كي