Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.7920(18-03-2010), 1.0.0.12662(19-03-2010)
ASIC ID: 0x3162 [UPP_8M ver: 6.2]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0000 0001 [unused/removed]
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: 0000 0001 0000 0001 0004 0005 0004 0005
Algorithm: u3_amd.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x78C0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 0012D267:DA3BDA66
ASIC type: 11
UEM Imei: 35204002143310
Processing file: rm340__05.61.mcusw as MCU
[DCT4,DCT4 ALGORITHM] size: 10.70 MB
Supported Ids: 3160, 3161, 3162, 3164, 3166
Boot error: 03 00 00 72
UPP not responding !
- Repeat the procedure. Sometimes it is a matter of temporary communication problem or similar.
- Check that all used cable are solid without any visible damage and have good contact. If possible, try with other cables.
- On rare occasions phone might be damaged or dead. So, if possible, try with another phone.
flashing terminated !
Flashing terminated with error(s) in 1 min 22.922 s
RX Buffer: 33254000123413F042B372