جميع تحديثات ATF هنا في موضوعAdvanceBox Turbo واحد ومتجدد - آخر تحديث

[نصير الاسلام]

Advance Turbo Flasher v8.00
Release Date: November 25, 2011

HARMATTAN (MEEGO) Flashing Engine Fully Supported
--> FULL Flash N9-00, N950 and other upcoming MEEGO Devices
--> Flash EMMC (Mass Memory)
--> Secure User Data Erase (Removes Phone User Lock and Security Settings)
--> Supports Cold Flashing via "Skip ADL Chk" (Use only for non-booting Devices)

Known Limitations about MEEGO HARMATTAN Phones (N9-00 and N950)
--> Entire PM area is Write Protected... You can Read, but you cannot Write back anything
--> Security Code which is Read by ATF Software (PM 308,5) is NOT the same as the PHONE LOCK Code
--> When Phone goes to TEST MODE after flashing, it is Normal for ATF to get an ERROR while
reading IMEI and Simlocks on the First Read Attempt.
--> It is not Possible to Downgrade the Firmwares on these phones. So make sure that
your required Language Pack Exist on the Highest Firmware Version before
attempting to Upgrage your phone.

Bug Fixes:

1. FORCE Broadcom into TEST MODE is NO LONGER NEEDED!
--> NORMAL MODE Decrypt PM 120 NOW FIXED
--> NORMAL MODE Scan Phone Hang NOW FIXED
2. Automatically Selects "Backup RPL" before Phone is Authorized via USB Connection
3. Time and Date Format for saving PM and RPL files FIXED
4. ATF Support Site Login and ATF Network Login Delays FIXED
5. Improved BB5 ENO Flashing for USB ADL (Rapido Phones)
6. Re-Enabled SL3 to SL2 Downgrade Unlock for OLD HASH RAPIDO Phones

ATF N9 Flashing v8.00 Update


Download

Offical Hotfile Mirror

Offical Mirrorcreator Mirror

[NasirNS]

This Minor Update is available via the "Automatically Check for Updates"

What's New:

1. ATF Network Broadcom Authorize no longer needs minimum 5 credits.

2. Better Detection for SL3 Phone that will not Accept NCK Codes.

Get it here:

[mena abdalla]

What's new:

- Backup RPL button is now enabled again
- Detection of MMC/SD Card is improved now
- MMC PSW Brute Force is now faster than v8.50
- ERROR: "List index out of bonus" on Windows Phone tab has FIXED now

Get ATF v8.55 from here:

[mena abdalla]

Advance Turbo Flasher v8.60



ATF Box New Firmware LogiCore 10.3.12 Official Release

--> Fixes SD Card Slot Issues on ATF Big Chrome Boxes
--> Enables the use of ATF SD Card Cable Accessory for ATF Lightning and Nitro Boxes
--> More Stable FBUS Flashing for RAP3Gv30 Phones
--> 13% Speed Increase in Nitro FBUS Flashing
--> 5% Speed Increase in USB Flashing (BB5, Infineon, MAEMO and MEEGO)

ATF New Driver for New Firmware

--> New More Stable FTDI Driver Set for better Operation when used with other GSM Boxes


Rapido "Boom Boom Pow" Update

--> (Boom) First in the World RAPIDO Full RPL Certificates (NPC, HWC, CCC and R&D) Backup via USB Cable Only
--> (Boom) First in the World RAPIDO Full Flash Chip Reading via USB Cable Only
--> (Pow ) RAPIDO Phone Authorize using ATF Network via USB Cable Only*

ATF BB5 Software Enhancements:

--> BUSCheck Button in USB Mode is now Enabled for ALL New Generation Single CPU BB5 and Infineon Phones**
--> Backup RPL Button in USB Mode is now Enabled for ALL New Generation Single CPU BB5**
--> Write RPL via USB is now Enabled for ALL BB5 RAPIDO Phones (RAPIDOYAWEH not Supported)
--> Write RPL via USB is now Enabled for ALL BB5 RAP3Gv40 Phones
--> Write RPL via USB is now Enabled for ALL BB5 RAPUYAMA v1.1 Phones
--> Write RPL via USB is now Enabled for ALL BB5 RAPUYAMA v2.1 Phones
--> Write RPL via USB is now Enabled for ALL BB5 BCM21351 Phones (Broadcom)
--> Custom Erase Flash Chip via USB is now Enabled for ALL BB5 RAPIDO Phones (RAPIDOYAWEH not Supported)
--> Custom Erase Flash Chip via USB is now Enabled for ALL BB5 RAP3Gv40 Phones
--> Custom Erase Flash Chip via USB is now Enabled for ALL BB5 RAPUYAMA v1.1 Phones
--> Custom Erase Flash Chip via USB is now Enabled for ALL BB5 RAPUYAMA v2.1 Phones
--> Custom Erase Flash Chip via USB is now Enabled for ALL BB5 BCM21351 Phones (Broadcom)
--> Permanent Memory Area (PM) is now Initialized Before Writing
--> Upto 7 Flash Files can now be displayed with Scrolling Down the Flash File List
--> VPL Details are now Displayed in the Main Log Window
--> New button "Check" can now be used to determine whether your Downloaded Flash files are corrupted or not
--> Added Force 64K CNT Page is now Available in both FBUS and USB Connections
--> Original SX4 Server is now updated and fixed to v1.50 Protocol
--> Software Logs for USB Flashing Phone #2 is now Saved
--> Software Logs for SD BF is now Saved
--> New Feature Decrypt PM 308 will decrypt all PM 308 blocks and save it into a file

Micro SD Card Brute Force Module Update:

--> Speed Cap for SD Card Bruteforce is Now Removed (Now you can BF with MAXIMUM SD CARD SPEED***)
--> Fixed Bug on Detecting Lock Status of some "non standard" Cards
--> Enabled Option to use ATF SD Card Cable

General Software Bug Fixes:

--> Enable Logging Option in Settings --> General Settings is now Enabled
--> Fixed Bug of UI Crashing when Flash File List is double-clicked
--> Super Dongle Keys are now Checked Before getting access to use the Original SX-4 Server
--> Enabled WinUSB Driver detection and installation upon Program Start-Up

Other Updates:

--> Updated New Phone Models inside Nokia.ini

Notes:

* ATF Network Activation is Required for Authorizing RAPIDO Phones via USB Connection
** Single CPU means that the BB5 Phone does not have a separate APE CPU.
Examples of Dual CPU Phones: N95-8GB, 6630, N90, E90
Rap3Gv3 Phones are not supported for USB Buscheck as well (5130c, 3110c, 7210c, 6300c)
*** SD Card BF Speed Depends on the Actual SD Card. Speeds may vary
from 45 passwords per second to 25,000 passwords per second.



Official download links:

Mirrorcreator

[mena abdalla]

What's new in 8.63

20-digit Code Checking On Infineon Phones
ROOT HASH B8C3ADECFC997FCD8081D3DEAF870B8C Now Supported on USB RAPIDO (Backup RPL, Buscheck, Authorize etc...)
6700c and E52 USB Booting Adjustments


What's new in 8.62

Fixed RAP3Gv3 USB Flashing "MCU CONFIGURATION IS NOT VALID"
Fixed Battery Value 0 Error When Flashing via USB
Fixed USB Booting Problem Delay on FUR
Fixed FBUS Buscheck Timeout Delays (Faster Buschecks Now)
Fixed Infineon SP Lock Table Reading

Get new ATF SW from here:

[kader19c]

Flashing Updates:

--> Lumia 900 RM-808 and RM-823 Now Fully Supported and Tested
--> Blocked Cross Flashing a X3-02.5 (RM-775) with a X3-02 (RM-639) Flash File
--> Blocked Cross Flashing a C3-01.5 (RM-776) with a C3-01 (RM-640) Flash File
--> Dual CPU (CMT + APE) New Protocol FBUS Flashing Re-Activated (N95, E90)
--> Dual CPU (CMT + APE) Phone Authorize via The ATF Network Re-Activated
--> Dual CPU (CMT + APE) ADL USB Flashing Re-Activated (N95-8GB, N95, N73, E90)
--> Dual CPU (CMT + APE) First In The World ADL USB Recovery Flashing (N95-8GB, N95, E90)

Other Updates:
--> Improved Drive Detection for ALL SYMBIAN APE Phones...
--> FORMAT FILE SYSTEM Now Supports S40 FILE2 Drives (5130c, X2-01, etc..)
--> REMOVE SD Card Password via S40 Phone FILE2 Format of Drive E:

DCT4 Update:
--> DCT4 ASIC 2-5-6-7 SP Data Rebuild for DIRECT UNLOCK and REPAIR

Other Updates:
--> New Products Added to Nokia.ini

Bugs Killed in this Update:
--> Fixed SUB SCAN PHONE = PC Restart Bug on some AMD and Intel Core2 Computers
--> Fixed USB Flashing "MCU CONFIGURATION IS NOT VALID"
--> Fixed Battery Value 0 Error When Flashing via USB
--> Fixed USB Booting Problem Delay on FUR
--> Fixed FBUS Buscheck Timeout Delays (Faster Buschecks Now)
--> Fixed Bug on Unsupported "NORMALIZE SUSD" Flash Files
--> Fixed RAP3Gv3 FBUS Flashing Bug "Please Check RX2 Blah Blah..."
--> Adjusted Infineon USB Flashing to exit properly during a Flash Error



Special Thanks Goes To:

ashish_gsm <-- USB Scan Phone Surrogate PC for Debugging
MOYAL <-- USB Scan Phone Fix Beta Tester



Some Clarifications:

1. Old Phones Can now be flashed with New Loaders and New Protocol (like 5130 and N95-8GB).
But it is still BETTER to use OLD PROTOCOL and OLD LOADERS for these Phones.

2. You can now flash N95-8GB, N73, E90 etc via USB Cable Only.

3. Nitro and Lightning users can now EASILY REMOVE Password from any SD Card without buying
or making an SD Card Cable Adapter. Simply put SD Card inside a S40 Phone like 5130c or
X2-01 etc... When card is now inside the phone, use FILE SYSTEM FORMAT Option to Format
Drive E:... That is it!

Who will buy this if you can get more in ATF?


__________________________________________________ ________________________

[
ATF v8.70 Update!! Public Discussion Thread:
ATF v8.70 Update!! Public Discussion Thread:




ATF [Advance Turbo Flasher] official web sites:
International - http://www.advance-box.com/

ATF [Advance Turbo Flasher] official support forums:
World Wide: Advance Turbo Flasher - GSM-Forum
Indonesia: ATF (Advance Turbo Flasher))
Philippine: Gsmph


The Master Piece

Download Links:

Download mirrors for ATF_v8.70_Full_Installer.rar - Mirrorcreator - Upload files to multiple hosts

رابط مباشر

https://rapidshare.com/#!download|1p...6200D2AF80|0|0

[mena abdalla]

Introducing the Official ATF Nitro SD Reader.







The ATF Nitro SD Reader enables Micro SD Card Brute-Force and
Factory Formatting Functionalities for ALL ATF Boxes without
Micro SD Card Ports. It also works on the Original ATF Chrome Box.

Features:

Ultra-Fast Communication Speed (upto 25 Mhz for Hi-Speed Capable Cards).
Fastest Brute-Force Speed with Intelligent Card Speed Threshold Adjustment.
First and ONLY Device in the GSM Industry that can retrieve SD Card Passwords without FORMAT.

Compatibility:

Compatible with ATF Lightning, ATF Nitro and ATF Chrome Boxes with LogiCore 10.3.12 or Higher.
Compatible with ALL Micro SD Card Brands that conform or don't conform to the SD Standards.
Compatible with ALL Micro SD Card Capacities (Tested upto 128 GigaBytes).


Flashing Updates:

--> Added Support for Newer Mass Memory Content Files
--> Only Scans Existing VALID Directories for Flash Files
--> Skips MEEGO/MAEMO Flash File Intensive Pre-Parsing


Other Updates:

--> Custom PM Erase Section and Sub Field (For Expert Use Only)
--> Support for ATF Nitro SD Card Reader for SD Card BF and Factory Formatting
--> Added New Phones inside Nokia.ini


Bug Fixes:

--> Fixed AUTO-ADL Flashing Selection on LIVE RAPIDO Phones
--> Fixed Incorrect SP Lock/Open Status on One Specific Service Provider
--> Fixed USB "ULTRA SLOW" Mass Memory Flashing for Built-In EMMC Chip
--> Fixed Some Wrong Entries inside Nokia.ini






__________________________________________________ ________________________

DOWNLOAD HERE:

Offical Hotfile Mirror
Offical Mirrorcreator Mirror

[mena abdalla]

A New EXE Update v8.95 has been uploaded to the ATF Server.

To Get this Update, please follow the Steps in this link:
How to use ATF AUTO-UPDATE Feature [Tutorial]


N9-00 SPECIAL Update !!!

http://174.120.45.27/tmp/n9_daddy.jpg



Special Features (Requires ATF Network Authorization):
--> N9-00 RM-696 SL3 Unlock via Brute Force (Decrypt PM 120)
--> N9-00 RM-696 Super Dongle Repair
--> N9-00 RM-696 SX-4 Authorization for entire PM Area (Except PM 308)
--> ALL N9-00 Special Features ONLY NEED USB CABLE Connection

Flashing Updates:
--> NONE

Bug Fixes:
--> Fixed Authorize Phone via FBUS ERROR



User Notes:
1. If you want to do any PM WRITE functions to N9 Phones, you must
first unlock the entire PM Area via SX-4 Authorization because the
ENTIRE PM AREA is Protected by SX-4.

Example, if you want to reset FBUS/KEYPAD Lock Counters, you need
to SX-4 Authorize the Phone first.


2. I will repeat this again, because it seems some people claim that
they can read Security Code from N9-00 very easily....

The SECURITY CODE read by SCAN PHONE is NOT THE Phone Lock
Code. The Phone lock code is running on the OMAP APE Side and the
SECURITY CODE is for the CMT side, which is practically useless.


3. This is very very IMPORTANT! All N9-00 phones will NOT ACCEPT
NCK Codes via KEYPAD Entry because you will NOT GET "w" if you
want to type #pw+123456789012345+7#...

So it would be EASIER for you to just enter the NCK Codes via USB
Cable.

Or you can also try to ENTER the NCK Code via the Phone Menu:
SETTINGS - DEVICE - SIM CARD - ENTER UNLOCK CODE

Personally, I did not try this method, and it requires that there should
be a SIM Card inserted to the phone...


( 4. ATF is the ONLY tool which supports Nokia N9 SP Unlock
( No Regards to COPY-PASTERS )

[MoHaMeD GaZaL]

Release Date: December 20, 2012
Firmware Version Required : 10.3.30


"A Jingle BELLE OS Update"

Introducing ATF Super CMLA Key Repair and Direct PM 308 Security Block Write Back to SL3 Phones!
(New Hashes Requires ATF Network Phone Authorize)


Now you can Write Back your Original PM 308 Phone Backups back to the Phone!

--> The Super Dongle Key will Remain 100% Original
--> The CMLA Key will Remain 100% Original


But if you don't have PM 308 backup, then you can use Repair CMLA Key to allow
your phone to run the Latest Symbian Belle OS Releases. This Second option allows
you to to write CMLA Keys to any SL3 Phone even without PM 308 backup.


QUICK Q/A INFO:

Question: What is CMLA ?
Answer : It is basically some keys to be used for Digital Rights Managment. (CMLA Home)

Q: Why do we need CMLA Keys?
A: CMLA is checked and used when running Belle OS on majority of the newest SL3 Smart Phones.

Q: Do all phones need CMLA Keys?
A: No, but Majority Needs it.

Q: How do I know that my Phone needs CMLA Key Repair?
A: If your phone cannot start Belle OS and is just showing your scrolling Dots o o o o o o ....

Q: If I don't have ATF Box, how can I repair CMLA Keys?
A: Buy Original RPL, you will see CMLA_KEY inside... or just Buy Preactivated ATF Nitro Box.

Q: Is CMLA Repair using ATF Free?
A: Yes, but you need to Authorize Phone first via the ATF Network if your Phone is "New HASH".

Q: What is PM 308 Security Write Back Feature?
A: It is a feature that allows you to WRITE BACK PM 308 to SL3 Phones.

Q: Can I write back PM 308 from Phone A into another Phone B?
A: No, the PM 308 Backup must be from the same phone.

Q: I don't have PM 308 Backup, what can I do now?
A: Use Repair Super Dongle and Repair CMLA Keys instead.

Q: I cannot find this new feature in ATF 9.40, how do I use it?
A: It is completely integrated into the ATF Software, so just use "Write PM" function in ATF Software.

Q: Do I need to AUthorize Phone First before I can use this new feature?
A: Yes, the phone needs to be Authorized by The ATF Network if your phone is "New HASH".



Other Updates:

- Added RM-862, RM-863, RM-864, RM-872 and RM-873 for Infineon/Intel XG213 Decrypt PM 120 HASHES
- Added New Nokia Products in Nokia.ini
- Fixed Minor BB5 USB Booting from 9.30





__________________________________________________ ________________________


ATF Super CMLA Repair, Direct PM-308 v.9.40 Update!! Public Discussion Thread:
ATF Super CMLA Repair, Direct PM-308 v.9.40 Update!! Public Discussion Thread:


ATF [Advance Turbo Flasher] official web sites:
International - http://www.advance-box.com/

ATF [Advance Turbo Flasher] official support forums:
World Wide: Advance Turbo Flasher - GSM-Forum
Indonesia: ATF (Advance Turbo Flasher))
Philippine: Gsmph
Syria: Arabic Support (Syria) GsmVIP
Chinese support forum : ATF Box
Vietnam: Saigonmobile
India: Advance Box - .:: GsmIndia ::.
Official Iran Support Forum : ASANGSM FORUM
Bangladesh: Advance Box - Dhaka Mobile
Chinese Support forum : www.yananliuhuan.com



The Master Piece

[malksh3]

v9.61 (Use "Check Software Updates in ATF Software")
Release Date: March 02, 2013
Firmware Version Required : 10.3.30 or 10.3.50

* Fixed Box Firmware Update Error

Release Date: February 28, 2013
Firmware Version Required : 10.3.30 or 10.3.50


"Lumia TP Updates"


What's New?

* Lumia 510 (RM-889, RM-898) Dead Boot Repair Supported
* Lumia 505 (RM-923) Dead Boot Repair Supported
* Lumia 510 TP Pictures Added
* Lumia 900 "Unlocked Bootloader" added (Qualcomm OSBL)


Something for Developers (Requires Password)

* Lumia eMMC RAW Read/Write via TP "CUSTOM Read or WRITE" Option
* Supported Phones: Lumia 505, 510, 610, 610C, 710, 800, 800C and 900
* Password is 70617373776F7264


Small Bug Fixes

* Skipped checking SRP and iOS Service Cost during Phone Authorize
* Fixed Simlock Recovery Bug on phones with APE NAND Flash Chips

Other Stuff

* Complete Variant Listing for Lumia Win7 and Win8 Phones (as of Feb-28-2013)
* Complete Product Listing in Nokia.ini (as of Feb-28-2013)


******************************************
* LogiCore 10.3.50 OPEN BETA COMING SOON *
******************************************

In preparation for the Release of LogiCore 10.3.50, we are looking for
ATF Users who are willing to participate in testing the new features
of this Firmware.

1. Beta Testers needed - To test the Stability of LogiCore 10.3.50 Beta
2. Beta Testers needed - Who have soldering skills and familiar with JTAG

Who will buy this if you can get more in ATF?


__________________________________________________ ________________________


Buy only from ATF [Advance Turbo Flasher] authorized resellers:
ATF [Advance Turbo Flasher] Authorized Distributors and Resellers List


ATF [Advance Turbo Flasher] official web sites:
International - http://www.advance-box.com/

ATF [Advance Turbo Flasher] official support forums:
World Wide: Advance Turbo Flasher - GSM-Forum
Indonesia: ATF (Advance Turbo Flasher))
Philippine: Gsmph
Syria: Arabic Support (Syria) GsmVIP
Chinese support forum : ATF Box
Vietnam: Saigonmobile
India: Advance Box - .:: GsmIndia ::.
Official Iran Support Forum : ASANGSM FORUM
Bangladesh: Advance Box - Dhaka Mobile
Chinese Support forum : www.yananliuhuan.com



The Master Piece
DOWNLOAD HERE:
Offical Hotfile Mirror
Offical Mirrorcreator Mirror
Offical 4shared Mirror

ATF Update v9.60 Official Mediafire Mirror