اقتباس المشاركة الأصلية كتبت بواسطة melizi_2008 مشاهدة المشاركة
Skipping RPL decryption...
Parsing decrypted RPL...
Processing FBUS Part...
Processing FLASHBUS Part...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 08A0000D62987D567F7FE1F5DCCA5FFD237187A5
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.9.17.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
Testing TX2 Line...
TX2 Line OK!
APE Subsystem Not Found
Flashbus Write baud set to 5.0Mbits
CMT HWC Erased
CMT HWC Written
CMT CCC Erased
CMT CCC Written
Restarting MCU...
Write RPL Finished!
SX4 Authorization / SD Repair Procedure Started....
"08A0000D62987D567F7FE1F5DCCA5FFD237187A5.C0001F33" Exists, That is good...
MCU Version 
MCU Date
Product
Manufacturer
IMEI 355246035358977
Mastercode 47222142
Reading Security Block...
Security block OK and saved to "_355246035358977_382010_72313 PM.SecurityBlock.PM"
SX4 Status: Not authorized (74)
Started mutual authenthication with card...
Receiving Phone Seed 1...
Phone Seed 1 Received
Sending calculated Data 1, and expecting Seed 2...
Calculated Data 1 accepted, Phone Seed 2 Received
Sending calculated Data 2
Calculated Data 2 sent, Checking Authorization Status again
Authorization successfully finished!
WRITE NOW VIRGIN SX4 PM which CONTAINS PM FIELDS 1 and 309!
[1,0] Written, Length: 12 bytes, Status: OK
[1,1] Written, Length: 70 bytes, Status: OK
[1,2] Written, Length: 70 bytes, Status: OK
[1,3] Written, Length: 70 bytes, Status: OK
[1,4] Written, Length: 70 bytes, Status: OK
[1,5] Written, Length: 276 bytes, Status: OK
[1,6] Written, Length: 276 bytes, Status: OK
[1,7] Written, Length: 276 bytes, Status: OK
[1,8] Written, Length: 276 bytes, Status: OK
[1,9] Written, Length: 384 bytes, Status: OK
[1,10] Written, Length: 384 bytes, Status: OK
[1,11] Written, Length: 384 bytes, Status: OK
[1,12] Written, Length: 384 bytes, Status: OK
[1,13] Written, Length: 384 bytes, Status: OK
[1,14] Written, Length: 384 bytes, Status: OK
[1,15] Written, Length: 384 bytes, Status: OK
[1,16] Written, Length: 384 bytes, Status: OK
[1,17] Written, Length: 32 bytes, Status: OK
[1,19] Written, Length: 16 bytes, Status: OK
[1,20] Written, Length: 32 bytes, Status: OK
[309,0] Written, Length: 4 bytes, Status: OK
[309,1] Written, Length: 2 bytes, Status: OK
[309,2] Written, Length: 12 bytes, Status: OK
[309,4] Written, Length: 12 bytes, Status: OK
[309,5] Written, Length: 12 bytes, Status: OK
[309,7] Written, Length: 12 bytes, Status: OK
[309,8] Written, Length: 12 bytes, Status: OK
[309,17] Written, Length: 12 bytes, Status: OK
[309,22] Written, Length: 12 bytes, Status: OK
Write PM Finished, Record written OK: 29, Record written NOT OK: 0


اليك اينفو الهاتف


Reading Security Block...
Security block OK and saved to "RM-495_355246035358977_382010_72703 PM.SecurityBlock.PM"
Step 1 : Testing SIMLOCK
SIMLOCK SEFLTEST PASSED OK!
Step 2 : Testing SECURITY
-- SECURITY PROBLEM --

Phone have failed SECURITY Test, that means Superdongle Area is DAMAGED!
To repair it, simply slick "SX4 Authorization / SD Repair" button.
After SX4/SD Repair, don't forget to write PM file with fields 1,309

-- SECURITY PROBLEM --
Step 3 : Analyzing Security Block
"08A0000D62987D567F7FE1F5DCCA5FFD237187A5.C0001F33" Exists, That is good...
Checking SUPERDONGLE...
SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
Checking SIMLOCK...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking MCU&DSP TIMESTAMPS...
MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
Checking CMLA KEYS...
Failed to decode Security Section, Box Reported: Security Section Checksum Error (decryption fails?)
Checking ECC KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking DIV KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Analyze finished!