اخي ممكن دقائق قليلة انا برفع لك الصور
وآسف على التأخير
رد: مشكل فىSX4 Authorization / SD Repair Procedure Started..
اخي ممكن دقائق قليلة انا برفع لك الصور
وآسف على التأخير
melizi_2008 شَكر
رد: مشكل فىSX4 Authorization / SD Repair Procedure Started..
أخي اتبع هده الخطوات اللي بالصور
وسينحل المشكل ان شاء الله
1- قم ببالتعليم على plain rpl وقم بكتابة ملف rpl بدون npc ستجده بالمرفقات الرد الثاني لي
2-بعدها قم بإستخدام عملية SX4 Authorization / SD Repair Procedure Started
3-مباشرة قم بكتابة PM الموجود بالمرفقات ستجده بالرد الأول لي
بالتوفيق أخي
melizi_2008 شَكر
رد: مشكل فىSX4 Authorization / SD Repair Procedure Started..
المشاركة الأصلية كتبت بواسطة gsm.magic
أخي اتبع هده الخطوات اللي بالصور
وسينحل المشكل ان شاء الله
1- قم ببالتعليم على plain rpl وقم بكتابة ملف rpl بدون npc ستجده بالمرفقات الرد الثاني لي
2-بعدها قم بإستخدام عملية SX4 Authorization / SD Repair Procedure Started
3-مباشرة قم بكتابة PM الموجود بالمرفقات ستجده بالرد الأول لي
بالتوفيق أخيSkipping RPL decryption...
Parsing decrypted RPL...
Processing FBUS Part...
Processing FLASHBUS Part...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 08A0000D62987D567F7FE1F5DCCA5FFD237187A5
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.9.17.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
Testing TX2 Line...
TX2 Line OK!
APE Subsystem Not Found
Flashbus Write baud set to 5.0Mbits
CMT HWC Erased
CMT HWC Written
CMT CCC Erased
CMT CCC Written
Restarting MCU...
Write RPL Finished!
SX4 Authorization / SD Repair Procedure Started....
"08A0000D62987D567F7FE1F5DCCA5FFD237187A5.C0001F33" Exists, That is good...
MCU Version
MCU Date
Product
Manufacturer
IMEI 355246035358977
Mastercode 47222142
Reading Security Block...
Security block OK and saved to "_355246035358977_382010_72313 PM.SecurityBlock.PM"
SX4 Status: Not authorized (74)
Started mutual authenthication with card...
Receiving Phone Seed 1...
Phone Seed 1 Received
Sending calculated Data 1, and expecting Seed 2...
Calculated Data 1 accepted, Phone Seed 2 Received
Sending calculated Data 2
Calculated Data 2 sent, Checking Authorization Status again
Authorization successfully finished!
WRITE NOW VIRGIN SX4 PM which CONTAINS PM FIELDS 1 and 309!
[1,0] Written, Length: 12 bytes, Status: OK
[1,1] Written, Length: 70 bytes, Status: OK
[1,2] Written, Length: 70 bytes, Status: OK
[1,3] Written, Length: 70 bytes, Status: OK
[1,4] Written, Length: 70 bytes, Status: OK
[1,5] Written, Length: 276 bytes, Status: OK
[1,6] Written, Length: 276 bytes, Status: OK
[1,7] Written, Length: 276 bytes, Status: OK
[1,8] Written, Length: 276 bytes, Status: OK
[1,9] Written, Length: 384 bytes, Status: OK
[1,10] Written, Length: 384 bytes, Status: OK
[1,11] Written, Length: 384 bytes, Status: OK
[1,12] Written, Length: 384 bytes, Status: OK
[1,13] Written, Length: 384 bytes, Status: OK
[1,14] Written, Length: 384 bytes, Status: OK
[1,15] Written, Length: 384 bytes, Status: OK
[1,16] Written, Length: 384 bytes, Status: OK
[1,17] Written, Length: 32 bytes, Status: OK
[1,19] Written, Length: 16 bytes, Status: OK
[1,20] Written, Length: 32 bytes, Status: OK
[309,0] Written, Length: 4 bytes, Status: OK
[309,1] Written, Length: 2 bytes, Status: OK
[309,2] Written, Length: 12 bytes, Status: OK
[309,4] Written, Length: 12 bytes, Status: OK
[309,5] Written, Length: 12 bytes, Status: OK
[309,7] Written, Length: 12 bytes, Status: OK
[309,8] Written, Length: 12 bytes, Status: OK
[309,17] Written, Length: 12 bytes, Status: OK
[309,22] Written, Length: 12 bytes, Status: OK
Write PM Finished, Record written OK: 29, Record written NOT OK: 0
رد: مشكل فىSX4 Authorization / SD Repair Procedure Started..
اليك اينفو الهاتف
Reading Security Block...
Security block OK and saved to "RM-495_355246035358977_382010_72703 PM.SecurityBlock.PM"
Step 1 : Testing SIMLOCK
SIMLOCK SEFLTEST PASSED OK!
Step 2 : Testing SECURITY
-- SECURITY PROBLEM --
Phone have failed SECURITY Test, that means Superdongle Area is DAMAGED!
To repair it, simply slick "SX4 Authorization / SD Repair" button.
After SX4/SD Repair, don't forget to write PM file with fields 1,309
-- SECURITY PROBLEM --
Step 3 : Analyzing Security Block
"08A0000D62987D567F7FE1F5DCCA5FFD237187A5.C0001F33" Exists, That is good...
Checking SUPERDONGLE...
SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
Checking SIMLOCK...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking MCU&DSP TIMESTAMPS...
MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
Checking CMLA KEYS...
Failed to decode Security Section, Box Reported: Security Section Checksum Error (decryption fails?)
Checking ECC KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking DIV KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Analyze finished!
رد: مشكل فىSX4 Authorization / SD Repair Procedure Started..
سلام عليكم بعد تأكد من حالة الهاتف واتصال بي بعض الاعضاء قالو لا يمكن اصلاح مشكل
كونتك سيرفيس 5130cمع تجربه من قبل عدد من الاصدقاء
يعنى بوكس سكلون غير قادر على حل مشكل هادا الهاتف مع تجربه فى هوتف اخري وتحلت مشكل والحمد لله
عندى سؤال هل يمكن اصلاح مشكل ايمي123456654321؟ بوسطة سيكلون ام لا
وشكرا لكم
رد: مشكل فىSX4 Authorization / SD Repair Procedure Started..
غير مدعوم من طرف أي بوكس أخي
بالنسبة للمشكل اللي عندك لهاتف 5130xm عملت الخطوات صح.
ولو امكن تعمل انفو ل selftests
لأن المشكل ممكن يكون هاردويير.
رد: مشكل فىSX4 Authorization / SD Repair Procedure Started..
Passed ST_EAR_DATA_LOOP_TEST
Passed ST_SIM_CLK_LOOP_TEST
Passed ST_SIM_IO_CTRL_LOOP_TEST
Passed ST_SLEEP_X_LOOP_TEST
Passed ST_UEM_CBUS_IF_TEST
Passed ST_KEYBOARD_STUCK_TEST
Passed ST_CAMERA_IF_TEST
Passed ST_BACKUP_BATT_TEST
Passed ST_LCD_TEST
Passed ST_LPRF_IF_TEST
Passed ST_LPRF_AUDIO_LINES_TEST
Passed ST_CURRENT_CONS_TEST
Passed ST_RADIO_TEST
Passed ST_BACKLIGHT_TEST
Passed ST_SIM_LOCK_TEST
Failed ST_SECURITY_TEST
Passed ST_BT_WAKEUP_TEST
Passed ST_HOOKINT_TEST
Passed ST_TAHVOINT_TEST
Passed ST_BTEMP_TEST
Passed ST_IIC_TEST
Passed ST_EXT_DEVICE_TEST
Passed ST_CDSP_SLEEPCLK_FREQ_TEST
Passed ST_CDSP_SLEEPCLOCK_FREQ_TEST
Passed ST_CDSP_RF_BB_IF_TEST
Passed ST_CDSP_RF_SUPPLY_TEST
Passed ST_CDSP_TX_PLL_PHASE_LOCK_TEST
Passed ST_CDSP_RX_IQ_LOOP_BACK_TEST
Passed ST_CDSP_GSM_TX_POWER_TEST
Selftests done, Tests total: 29, Tests passed: 28, Tests not passed: 1
AMINO REP شَكر
رد: مشكل فىSX4 Authorization / SD Repair Procedure Started..
أخي قم بهده الخطوات وبعد الإنتهاء منها إعمل selftests
1- قم بإستخدام عملية SX4 Authorization / SD Repair Procedure Started
2-مباشرة قم بكتابة PM الموجود بالمرفقات ستجده بالمرفق
لكن هده المرة Full Pm ستجده بالمرفقات
ولوسمحت ترفع لنا الخطوات التي قمت بها
بالتوفيق أخي متابعك لغاية حل المشكل إن شاء الله
رد: مشكل فىSX4 Authorization / SD Repair Procedure Started..
بعد كتابة بيام
Selftests to proceed: 29
Passed ST_EAR_DATA_LOOP_TEST
Passed ST_SIM_CLK_LOOP_TEST
Passed ST_SIM_IO_CTRL_LOOP_TEST
Passed ST_SLEEP_X_LOOP_TEST
Passed ST_UEM_CBUS_IF_TEST
Passed ST_KEYBOARD_STUCK_TEST
Failed ST_CAMERA_IF_TEST
Passed ST_BACKUP_BATT_TEST
Passed ST_LCD_TEST
Passed ST_LPRF_IF_TEST
Passed ST_LPRF_AUDIO_LINES_TEST
Passed ST_CURRENT_CONS_TEST
Passed ST_RADIO_TEST
Passed ST_BACKLIGHT_TEST
Failed ST_SIM_LOCK_TEST
Failed ST_SECURITY_TEST
Passed ST_BT_WAKEUP_TEST
Passed ST_HOOKINT_TEST
Passed ST_TAHVOINT_TEST
Passed ST_BTEMP_TEST
Passed ST_IIC_TEST
Passed ST_EXT_DEVICE_TEST
Passed ST_CDSP_SLEEPCLK_FREQ_TEST
Passed ST_CDSP_SLEEPCLOCK_FREQ_TEST
Passed ST_CDSP_RF_BB_IF_TEST
Passed ST_CDSP_RF_SUPPLY_TEST
Passed ST_CDSP_TX_PLL_PHASE_LOCK_TEST
Passed ST_CDSP_RX_IQ_LOOP_BACK_TEST
Passed ST_CDSP_GSM_TX_POWER_TEST
Selftests done, Tests total: 29, Tests passed: 26, Tests not passed: 3
رد: مشكل فىSX4 Authorization / SD Repair Procedure Started..
رجع له الباكوب PM الدي قمت بتخزينه في الأول.
ضوابط المشاركة
رد مع اقتباس
المفضلات