03.03.2010 - Phoenix Service Software 2010.8.4.41526

**IRAQ MASTER** · 03-03-2010, 01:57 PM

Phoenix Service Software 2010.8.4.41526

This Phoenix Service Software installation package includes following SW components:

* Phoenix Service Software 2010.8.4.41526
* DK2 Dongle Driver v 7.14.0.25
* Nokia Connectivity Cable USB Driver v 7.1.23.0
* Flash Update Package 09.050.025
* FLS-x Dongle Driver v 2.09.28

HW & tool requirements:
Please see General Service Bulletin SB-209.
Supported Operating Systems and user rights:

* - Windows XP Service Pack 1 or higher
* - When installing Phoenix into Win XP you must have local admin rights.
* - When using Phoenix in Win XP, user must have power user rights.

After installing Phoenix Service Software, please install latest product specific data package or SW bundles; do not use old data packages or SW bundles.
If you are installing this version of Phoenix on a new Imaged PC, and you are using FLS-4S or FLS-5 during the install, then install the FLS-X drivers first.

Changes/improvements made from previous version 2009.34.14.40684:

New products added:
- RM-601, RM-656, RM-657, RM-659, RM-559, RM-610, RM-618, RM-639,RM-632, RM-633, RM-634

Products removed:
- RM-623

New features:

* - Nokia Connectivity Cable USB Driver Version 7.1.23.0
* - Flash Update Package 09.050.025
* - Menu item WLAN Auto tune added for E72 product
* - New RF Losses.ini v 47 for auto tune
* - Product Code Change – window is now scalable, SW version information

for variants can now be seen if window is made larger.

Error corrections & changes:

* - Support for FPS-8 and FPS-11 Flash Prommers removed
* - Bluetooth Flasher – menu removed
* - Flash Memory test removed
* - Changes to WLAN UI to support new WLAN component versions
* - Auto tuning components updated to new version
* - Label printing changes to improve handling of older data package configurations. If product has older data package configuration, the user is advised to enable this option from the label printing UI
* - Improvements to Data Package Download. When computer has active internet connection, product code specific SW files are downloaded from Firmware Repository. Please note that the path for downloading files must also be configures to “Options / Product ********” - UI. If paths are not the same, downloaded SW files are not found.
* - Registration error for manual TX power level tuning component corrected.
* - Minor menu Changes for RM-598 and RM-604

Known errors & limitations:

* Software downgrade with Tucson system is only possible
* Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept.
* Flashing with Flashing with FLS-5, SS-46 and product specific adapter is not supported anymore
* If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong. This is caused by very old DCT-4 data packages which contain Flash Update Package and overwrite current information during installation. If you experience problems when updating FPS-x prommers, please check that Phoenix “Prommer maintenance” is looking for the files from the correct ******** which is “C:\Program Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will show error
* “Update via ini – file failed”. In this case, select “Update” from that Phoenix
* “Prommer maintenance” – UI, browse to correct directory and select
* “fpsxupd.ini” for all other prommers except the FPS-8.
* Multi Flash has limited capabilities, launch Multiflash UI first and then connect phones one by one, do not attempt to service more than 5 phones at the time
* Some phone models request SIM Lock data to be written in wrong format. You should use special DLL as a workaround for this product software related problem. Please see Common SB SB-102 “Tucson Add-On Components for SIM Lock version”
* While performing restore or variant change operations with Tucson system firmware update as a separate activity may increase stability.
* Refurbishment flashing and product code change for RX-51 product requires SX-4 card to be available
* FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21 prommer with new HW version is needed to correct this, and it is estimated to be available during 2nd half of 2010
* Please refer to product specific ********s and instructions concerning the limitations of the RX-51 product

Installation:
If you have Phoenix Service SW version 2007.4.6.170 or older you must uninstall it before installing this release.
1. Download phoenix_service_sw_2010_8_4_41526.exe
2. Close all other programs
3. Run phoenix_service_sw_2010_8_4_41526.exe and follow instructions on the screen to install Phoenix Service Software.
4. Connect a dongle (PK-1, PKD-1, FLS-4S, FLS-5) when message appears on the screen
5. If you are prompted to update any existing driver or file versions, select “yes”
6. Depending on the operating system PC may require rebooting
7. Allow Windows to register Phoenix components
8. Open Phoenix and update your prommer with the latest software included in this installation package
9. Use the latest available product specific data packages or flash bundles with new multi protocol Phoenix.

Download

وهذا رابط اخر للبرنامج رفعته لكم على العملاق Mediafire

Phoenix_Service_Software_2010.08.004.41526.exe