الرائع في PADfinder Box هو كما ذكرت سابقاً ايجاد pinuot للجهاز و من مميزاته الرائعه انه يتعامل مع عدة بوكسات التي تتعامل مع الأجهزة الصينية (Maxon ، فيليبس ، إل جي ، والهواتف الصينية وهلم جرا)ومن اهم هذه البوكسات.
Infinity-box, Furious, ET-box etc,multy Box
j
وبالاضافة الى ذلك انه متوافق مع الاكثر الكابلات استعمالاً:
RJ45 cables: Unibox, Multi-box, UFS, JAF, Infinity-box, Griffin, Thunderstorm, Furious-box, SPT-box and other RJ45 cables with compatible Gnd/Vpp pins
طريقته سهلة جداً سأشرح لكم اهم تلك البوكسات وهي multy Box وسينطبق هذا الشرح على جميع البوسكات السابقة..
وان كان هناك اي استفسار انا جاهزة لذلك ^_^
PadFinder is fully compatible with Multi-box and Multi-box LITE. It means that you can use PadFinder to find the pinout for almost ANY cell phone ( Maxon, Philips, LG, Chinese phones and so on ) or set it manually if you already know the pinout in the phone ( for example, you know the correct pinout on the phone with a new processor ) you can point in the right place and RX / TX pins in two clicks!
PadFinder is a really Universal cable-box - can work with all brands!
After you have successfully found the pinout, you just run the latest version of the ^_^necessary soft ( from the Multi-box or Multi-box LITE's list ) and start working!
1. Connect PadFinder to PC via an ordinary AB USB cable
2. Connect Multi-box or Multi-box LITE using RG45 Multi-box cable ( comes with the PadFinder cable set ).
* Plug the RJ45 to RJ45 cable into "Special" socket of Multi-box ( LITE ) and "MULTI-BOX CONNECT" socket on PadFinder.
*No need for additional USB connect.
ATTENTION: If connected like this, you must start any service tool of Multi-box ( LITE ) to give supply to PadFinder via RJ45 tyo RJ45 cable. If you don't do this, you won't be able to use PadFinder!
3. Connect the DB26 cable to PadFinder ( "Special" socket ) and to the phone.
5. Start the appropriate soft of Multi-box ( LITE ) and start working! Allways use the latest version!
IMPORTANT: No need for any activations to work with Multi-Box ( LITE )!
<<<يتبع
المفضلات