قائمة الاعضاء المشار اليهم

النتائج 1 إلى 8 من 8

الموضوع: PADfinder Box with multy Box

  1. #1
    .: جيماوي جديد :.
    الصورة الرمزية nariman7

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2008
    المشاركات
    48
    الشَكر (المُعطى)
    0
    الشَكر (المُستلَم)
    0
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    33

    افتراضي PADfinder Box with multy Box

    PADfinder Box


    pic wp&amps680

    An automatic pinout search (extremely convenient and usefull for chinese phones), saving the found pinout with the simple ini files system
    And consistent with the Multi-Box

    هوبوكس جديد يتم بالبحث عن ال pinout للاجهزة الصينية وغيرها وهو سهل التعامل ومتوافق مع بوكس المالتي وبكسة زر يحدد ال pinout للجهاز وهنا المعالجات التي يدعمها



    - MTK 62xx ( all MTK include 6228, 6229 etc )
    - AD 6522 / AD 6525
    - TI sample A ( VK3xx etc )
    - TI sample B ( boot in ROM )
    - TI sample B ( boot in Flash Rom )
    - SkyWorks CX805
    - Philips OM6357 ( bootstrap )
    - Philips ( tat mode )

    ويمكن ايجاده في i pmart


    يتبع>>>>



  2. #2
    عضو موقوف

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jun 2007
    الدولة
    egypt
    العمر
    44
    Sonork
    100.1596297
    Phone
    pin:22FD4455
    المشاركات
    3,582
    الشَكر (المُعطى)
    12289
    الشَكر (المُستلَم)
    6547
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    2
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    0

    افتراضي رد: PADfinder Box with multy Box

    بارك الله فيكي وان شاء الله يكون في ميزان حسناتك

  3. الشَكر nariman7 شَكر
  4. #3
    .: جيماوي جديد :.
    الصورة الرمزية nariman7

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2008
    المشاركات
    48
    الشَكر (المُعطى)
    0
    الشَكر (المُستلَم)
    0
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    33

    افتراضي الخطوة الأولى: تثبيت البوكس على الجهاز>>>

    FIRST STEPS TO MAKE IT WORK!

    Installation & Registration procedures

    1. Download the drivers <<<ستجده في المرفقات ^_^


    PadFinder driver1

    2. Connect the new PadFinder to the USB port of computer

    3. Install the found device - PAdFinder


    PadFinder driver2



    PadFinder driver3

    4. Specify the directory where you have unpacked the drivers


    PadFinder driver4


    5. Install PadFinder COM Port


    PadFinder driver5

    PadFinder driver6


    6. Install PadFinder USB Serial Port


    PadFinder driver7

    PadFinder driver8


    PadFinder driver9

    7. Drivers installation procedure is completed


    PadFinder driver10




    <<<<يتبع

  5. #4
    .: جيماوي جديد :.
    الصورة الرمزية nariman7

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2008
    المشاركات
    48
    الشَكر (المُعطى)
    0
    الشَكر (المُستلَم)
    0
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    33

    افتراضي الخطوة الثانية: تسجيل وتحديث البوكس

    How to register and update PadFinder?

    1. Download the Main program for PadFinder


    2. You will see the message: Box not registered and deactivated! Please, register your box for activation!

    aad3l1gmsqr1zb


    3. Go to the bookmark "FW Update and Registration" and fill in the mandatory registration information in the appropriate fields. It is obligatory to fill all the fields. You will receive the confirmation of your registration via your specified e-mail address.

    4. After the completion of the registration, it is necessary to update your box. You need to press the appropriate button.

    5. You can go to the "Settings" bookmark to check the registration data completion

    1wdqet8ii5cuymiu95l

    <<<يتبع
    التعديل الأخير تم بواسطة nariman7 ; 02-03-2010 الساعة 05:14 PM

  6. #5
    .: جيماوي جديد :.
    الصورة الرمزية nariman7

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2008
    المشاركات
    48
    الشَكر (المُعطى)
    0
    الشَكر (المُستلَم)
    0
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    33

    افتراضي كيفية ايجاد pinuot عن طريق البادفايندر:



    PINOUT DETECTION PROCEDURE


    1. Connect PadFinder to PC via USB AB cable

    2. Plug DB26 (26 pins) to "SPECIAL" socket.

    3. Plug the appropriate phone connector to the phone input.

    4. Remove phone battery!

    5. Using power wires from DB26 connect them insted of battery
    "+" (red) power wire must be connected to phone "+" contact
    "-" (black) power wire must be connected to phone "-" contact

    IMPORTANT: After you have connected the power wires instead of battery, look attentively to the box LED: if the RED LED is blinking, YOU HAVE CONNECTED THE POWER WIRES INCORRECT! You WILL NOT be able to start the Main Program and find the pinout!

    6. You may check the power wires connections. For this you need to:

    - Run Main tool
    - Press Power (VCC) "ON



    Main2


    - Press and hold "power" button on the telephone

    * If the handset Powers ON, than power wires are connected correctly and you can start the pinout detection process.
    * If the handset can't Power ON, than the power wires are connected incorrectly and you need to double check power wires.

    7. Start the Main service tool.


    Main1 1


    IMPORTANT: PadFinder has two Modes: Command Mode and Unibox Mode.
    "Command Mode" must be chosen for searching for the pinout.
    For unlocking/flashing the phone you must switch to "Unibox Mode" and run the necessary service tool.

    8. Detect the appropriate "Cable type


    Main3

    9. Select the CPU type. In most cases "Chinese" phone you can use default selected value: "MTK62xx"

    Main4


    10. Press "Search" button. You will see the information message that you need to

    PRESS AND HOLD phone "Power" button.

    Main5



    11. Press phone "Power" button and keep it pressed during the whole pinout detection process.

    12. You will see the detected Rx and Tx pins


    Main6


    13. You can also save the found pinout and name the model, so the next time you don't need to search it again!


    Main7

    14. Now you can use the found/selected pinouts configuration to work with any
    flashing/unlock software ( for instance, "Multi-box Chinese cocktail" )




  7. #6
    .: جيماوي جديد :.
    الصورة الرمزية nariman7

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2008
    المشاركات
    48
    الشَكر (المُعطى)
    0
    الشَكر (المُستلَم)
    0
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    33

    افتراضي طريقة توصيل البادفايندر مع المالتي بوكس

    الرائع في PADfinder Box هو كما ذكرت سابقاً ايجاد pinuot للجهاز و من مميزاته الرائعه انه يتعامل مع عدة بوكسات التي تتعامل مع الأجهزة الصينية (Maxon ، فيليبس ، إل جي ، والهواتف الصينية وهلم جرا)ومن اهم هذه البوكسات.

    Infinity-box, Furious, ET-box etc,multy Box
    j
    وبالاضافة الى ذلك انه متوافق مع الاكثر الكابلات استعمالاً:
    RJ45 cables: Unibox, Multi-box, UFS, JAF, Infinity-box, Griffin, Thunderstorm, Furious-box, SPT-box and other RJ45 cables with compatible Gnd/Vpp pins

    طريقته سهلة جداً سأشرح لكم اهم تلك البوكسات وهي multy Box وسينطبق هذا الشرح على جميع البوسكات السابقة..
    وان كان هناك اي استفسار انا جاهزة لذلك ^_^


    PadFinder is fully compatible with Multi-box and Multi-box LITE. It means that you can use PadFinder to find the pinout for almost ANY cell phone ( Maxon, Philips, LG, Chinese phones and so on ) or set it manually if you already know the pinout in the phone ( for example, you know the correct pinout on the phone with a new processor ) you can point in the right place and RX / TX pins in two clicks!

    PadFinder is a really Universal cable-box - can work with all brands!


    After you have successfully found the pinout, you just run the latest version of the ^_^necessary soft ( from the Multi-box or Multi-box LITE's list ) and start working!




    PadFinder and Multi box1

    1. Connect PadFinder to PC via an ordinary AB USB cable

    2. Connect Multi-box or Multi-box LITE using RG45 Multi-box cable ( comes with the PadFinder cable set ).

    * Plug the RJ45 to RJ45 cable into "Special" socket of Multi-box ( LITE ) and "MULTI-BOX CONNECT" socket on PadFinder.
    *No need for additional USB connect.

    ATTENTION: If connected like this, you must start any service tool of Multi-box ( LITE ) to give supply to PadFinder via RJ45 tyo RJ45 cable. If you don't do this, you won't be able to use PadFinder!



    3. Connect the DB26 cable to PadFinder ( "Special" socket ) and to the phone.

    4. Find the pinout using PadFinder ( see the manual )

    5. Start the appropriate soft of Multi-box ( LITE ) and start working! Allways use the latest version!

    PadFinder and Multi box2


    IMPORTANT: No need for any activations to work with Multi-Box ( LITE )!

    <<<يتبع


  8. #7
    .: جيماوي جديد :.
    الصورة الرمزية nariman7

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2008
    المشاركات
    48
    الشَكر (المُعطى)
    0
    الشَكر (المُستلَم)
    0
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    33

    افتراضي Full procedure on how PadFinder works with other boxes like Infinity-box, Furious, ET



    Full procedure on how PadFinder works with other boxes like Infinity-box, Furious, ET-box etc.


    PadFinder is a really Universal cable-box - can work with all brands!

    After you have successfully found the pinout, you just run the appropriate soft of any other developer that you have ( Infinity, JAF, Thunderstorm, ET-box, Furious ) and start working!

    IMPORTANT: NO NEED FOR ANY EXTRA ACTIVATIONS to work with other boxes!


    PROCEDURE OF PadFinder's WORK WITH INFINITY-BOX


    PadFinder&ampInfinity box1


    1. Connect PadFinder to PC via an ordinary AB USB cable

    2. Connect the DB26 cable to PadFinder ( "Special" socket ) and to the phone.
    3. Find the pinout using PadFinder (
    see the manual )


    4. Connect Infinity-box via an ordinary AB USB cable
    5. Start the appropriate soft of Infinity ( for example, Chinese Miracle )
    6. In the Device Manager find the appropriate PadFinder USB Serial Port among the Ports ( COM & LPT ) - in our example it is PadFinder USB Serial Port ( COM3 )


    PadFinder&ampInfinity box2


    7. Enter the "Settings" bookmark in "Chinese Miracle" and choose the found PadFinder USB Serial Port ( COM3 )


    PadFinder&ampInfinity box3 1


    8. In "Chinese Miracle" enter the "Service" bookmark and press "Read detailed information" button.

    PadFinder&ampInfinity box4 1


    PadFinder&ampInfinity box5 1

    9. The soft will read all the info from the phone!

    PadFinder - works with all other boxes and softwares!


    any questions about this box I am here ^_^





  9. #8
    .: جيماوي فعال :.
    الصورة الرمزية bob dj

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2009
    المشاركات
    288
    الشَكر (المُعطى)
    2
    الشَكر (المُستلَم)
    86
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    32

    افتراضي رد: PADfinder Box with multy Box

    بارك الله فيك والله موضوع يستحق عليه الف تقدير

الكلمات الدلالية لهذا الموضوع

المفضلات

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •