المرجو تفسير هدا المشكل
EasyJtag Suite Classic ver.: 2.5.0.8 / wxWidgets 3.1.0-W-U started.
OS ver.: Windows 7 (build 7601, Service Pack 1), 64-bit edition. Admin rights OK
undefined
Android Explorer ver.: 1.0.0.23
eMMC ODIN ver.: 1.0.11.2
Successfully connected to box on COM84
Box S/N: 02FFC01D016E834B, ,FW Ver.: 01.58
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.1.0, are OK
Z3X Card Serial : AA20-6274 , ver: 22
Z3X Card Activation [LG] : NOT ACTIVATED
Z3X Card Activation [SAMS] : NOT ACTIVATED
Z3X Card Activation [JTAG] : ACTIVATED
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 02FFC01D016E834B, ,FW Ver.: 01.58
Warning: CMD Pullup Level (0 mV) too low , check cables etc.!
CMD Active Level:0 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is off!
Can't init device, Reason: CMD Timeout Error
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 02FFC01D016E834B, ,FW Ver.: 01.58
Warning: CMD Pullup Level (0 mV) too low , check cables etc.!
CMD Active Level:0 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is off!
Can't init device, Reason: CMD Timeout Error
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 02FFC01D016E834B, ,FW Ver.: 01.58
Warning: CMD Pullup Level (0 mV) too low , check cables etc.!
CMD Active Level:0 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is off!
Can't init device, Reason: CMD Timeout Error
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 02FFC01D016E834B, ,FW Ver.: 01.58
Warning: CMD Pullup Level (0 mV) too low , check cables etc.!
CMD Active Level:0 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is off!
Can't init device, Reason: CMD Timeout Error
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 02FFC01D016E834B, ,FW Ver.: 01.58
Warning: CMD Pullup Level (0 mV) too low , check cables etc.!
CMD Active Level:0 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is off!
Can't init device, Reason: CMD Timeout Error
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 02FFC01D016E834B, ,FW Ver.: 01.58
Warning: CMD Pullup Level (0 mV) too low , check cables etc.!
CMD Active Level:0 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is off!
Can't init device, Reason: CMD Timeout Error
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 02FFC01D016E834B, ,FW Ver.: 01.58
Warning: CMD Pullup Level (0 mV) too low , check cables etc.!
CMD Active Level:0 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is off!
Can't init device, Reason: CMD Timeout Error
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 02FFC01D016E834B, ,FW Ver.: 01.58
Warning: CMD Pullup Level (0 mV) too low , check cables etc.!
CMD Active Level:0 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is off!
Can't init device, Reason: CMD Timeout Error
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 02FFC01D016E834B, ,FW Ver.: 01.58
Warning: CMD Pullup Level (0 mV) too low , check cables etc.!
CMD Active Level:0 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is off!
Can't init device, Reason: CMD Timeout Error
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 02FFC01D016E834B, ,FW Ver.: 01.58
Warning: CMD Pullup Level (0 mV) too low , check cables etc.!
CMD Active Level:0 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is ON!
Can't init device, Reason: CMD Timeout Error
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 02FFC01D016E834B, ,FW Ver.: 01.58
Warning: CMD Pullup Level (0 mV) too low , check cables etc.!
CMD Active Level:0 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is ON!
Can't init device, Reason: CMD Timeout Error
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
USB Open Failed, Reason: PORT Read Error
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 016E834B02FFC01D, ,FW Ver.: 0
Warning: CMD Pullup Level (0 mV) too low , check cables etc.!
CMD Active Level:0 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is ON!
Can't init device, Reason: CMD Timeout Error
Done.
Running:eMMC: Factory Format...
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:0 mV
CMD Active Level:0 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
Formatting eMMC card, please wait up to 3 min...
Can't init device, Reason: CMD Timeout Error
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 02FFC01D016E834B, ,FW Ver.: 01.58
Warning: CMD Pullup Level (0 mV) too low , check cables etc.!
CMD Active Level:0 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is ON!
Can't init device, Reason: CMD Timeout Error
Done.
المشاركة الأصلية كتبت بواسطة gsm***best
المفضلات