wiko lenny يقبل التفليش ولا يقلع

[رشيد أبو عبد الرحمن]

السلام عليكم من فضلكم الهاتف يقبل التفليش ولا يعمل أرجو المساعدة التفليش على nck Selected Model: 0-By CPU: MT6571_EMMC Exe version: NCKDongle AndroidMTK 2.5.8.2
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : ?MediaTek USB Port (COM19)?
Boot mode: Brom
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 1.
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 90014A48344731 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Preloader SEC version: 0
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : ?MediaTek DA USB VCOM (Android) (COM16)?
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Error get preloader size, aborting saving.
Starting flash.
Download firmware to flash now...
Error: S_SECURITY_SECURE_USB_DL_DA_RETURN_INVALID_TYPE
Wait untill phone will start charging.
All done.

[رشيد أبو عبد الرحمن]

الانفو على nck Action : Boot Info. Selected 0-By CPU:MT6572_EMMC
Exe version: NCKDongle AndroidMTK 2.5.8.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : ?MediaTek USB Port (COM19)?
Boot mode: Brom
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 1.
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 90014A48344731 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Preloader SEC version: 0
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : ?MediaTek DA USB VCOM (Android) (COM16)?
Wait untill phone will start charging.
All done.

[MOHAMED*GSM]

ارفع انفو الميراكل

[°°.."Y"S"F"GSM"..°°]

مشكور يا غالي على المتابعه

[رشيد أبو عبد الرحمن]

ليس لدي الميراكل حاولت على الكراك لم ينجح لايتعرف عليه البرنامج

[رشيد أبو عبد الرحمن]

ارفع انفو الميراكل

عند قرائة الانفو على كراك الميراكل هذا مايقرأ 1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Waiting for USB Port...
Set WIKO USB Port (COM3)
Please Hold "ON" to connect with the phone...
Unstable comport
1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Waiting for USB Port...
Set WIKO USB Port (COM3)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6572 SW:0000 Ver: CA01
Downloading Boot8 ...
EMMC Size: 0x00E9000000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
Reading infr(EMMC)...
>>Done.

[رشيد أبو عبد الرحمن]

عملية التفليش على كراك الميراكل
Info:
id:ALPS.KK1.MP7.V1
version:4.4.2
model:LENNY
brand:WIKO
manufacturer:WIKO
1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Waiting for USB Port...
Set WIKO USB Port (COM3)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6572 SW:0000 Ver: CA01
Downloading Boot8 ...
EMMC Size: 0x00E9000000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
Waiting for USB Port...
Set
Writing(Nand/eMMC)...
Writing MBR
Writing EBR1
Writing PRO_INFO
Writing NVRAM
Writing PROTECT_F
Writing PROTECT_S
Writing UBOOT
Writing BOOTIMG
Writing RECOVERY
Writing SEC_RO
Writing MISC
Writing LOGO
Writing ANDROID
Writing CACHE
Writing USRDATA
Checking Sum...
Write Done.
Total time: 31 mins 35 s

[رشيد أبو عبد الرحمن]

أرجو المساعدة من السادة المشرفين

[™MOHAMED]

ماهي مشكله الجهاز من الاساس انت عملت Back Up قبل التفليش
جرب عمل فحص للذاكره الداخليه

[رشيد أبو عبد الرحمن]

ماهي مشكله الجهاز من الاساس انت عملت Back Up قبل التفليش
جرب عمل فحص للذاكره الداخليه

أخي الجهاز طافي من الاول أرجو كيفية فحص للذاكرة