---



1. Device must be Power off with battery inside
2. Press and Hold VOl-, or some phones requires press and hold VOl- and VOL+ together
3. Insert usb cable
4. Install spd drivers if needed
====================================


- Connection : Flash Mode
- Brand : Itel
- Model : A56 (W6004)
- Process : Reset FRP
====================================


Waiting for device port ...
Port found


Port : [ COM46 : SPRD U2S Diag ]


Handshaking with device ...
Handshake done
Protocol : SPRD3
Detected SoC : Unisoc SC7731e


Sending config :  OK


Sending Boot [UAT PRO.boot1] : DONE
Sending Boot [UAT PRO.boot2] : DONE


BootVersion : Spreadtrum Boot Block version 1.1


Reseting Frp please wait ...
Reset Frp done


Rebooting device : FAILED




UAT PRO : 172.01 | 30 - June - 2024  [ 10:44:01 PM ]  IRAQ


Elapsed Time  :  49 seconds

---

---

Waiting fastboot device ...
Device found


Reading device Info ...


Device Model                        :        DUB-LX1
Device Firmware                :        DUB-LX1 8.2.0.192(C185)
Country                        :        MIDDLE EAST and AFRICA
Current Status                        :        SAFE
Image                                :        origin
Verify Mode                        :        enforcing
Root Info.                        :        safe
Lock State                        :        LOCK
Root State                        :        UNROOT
FB Lock                        :        LOCK
FRP Unlock                        :        LOCK
Device tampered                  :        False
Device unlocked                  :        False
Device critical unlocked        :        False
Charger screen enabled  :        False




1. Power off device
2. Press and hold volume up + volume down insert usb cable
3. In some case requires special edl cable or test points
4. Install Qualcomm drivers if needed
====================================


- Connection : EDL
- Method : By Model
- Brand : Huawei
- Model : DUB-LX1 (Y7 2019)
- Process : Reset FRP | Erase Method
====================================


Waiting for QDLoader port... COM28
Connecting to device... OK
Port : COM28 : Qualcomm HS-USB QDLoader 9008
USB : USB\ROOT_HUB30\4&F15BD&0&0
Drivers Info. : Qualcomm Incorporated, qcusbser.sys
Drivers : Qualcomm Technologies, Inc.
Driver Date : 07/08/2015
Driver Version : 2.1.2.0
Waiting for response... OK
Identifying device Mode... OK  [Sahara Mode]
Handshaking...OK
Init Handshake Sequence... OK
Initializing Protocol... OK
Serial : 96E6D18E SoC : [Snapdragon 450] Target : [MSM 8953]
HWID : [0X0009A0E1]
PKhash [0] : 6BC369511DA9CADB3A7AF61574F89DB3
PKhash [1] : 85003D6241BDD1FF573DBA61BF6AE119
Configuring boot... OK
Version [3] Code Size [288] Signature Size [256] Header Type [OLD]
Vendor [HUAWEI] OEM ID [0015] Qc Version [BOOT.BF.3.3.2-00019] Variant [JAADANAZA]
Connecting to flash programmer...OK
Chipset Type... 32 bit
Initializing connection... OK
Configuring device... OK
Firehose config : eMMC [Sector:512] [Target:4096] [Host:16384]
Reading partition map... OK - LU Count : 1
Reading partition table... OK  [58]
Reading software info...  OK  [System]
CPU : arm64-v8a
Host : cn-central-1b-23461ed071612770283946-7bfbc9596d-sh6w5
Local lang : en-US
Android Version : 8.1.0
Android OS : Oreo
Security Patch : 2020-09-01
Resetting FRP [Erase Method]...  OK


UAT PRO : 166.01 | 01 - نيسان - 2024  [ 10:22:16 م ]  IRAQ


Elapsed Time  :  1 minutes 25 seconds

---