�� - Medusa

�� . �� jtag � medusa pro. � �� ufs.�emmc.��.nand. �� .�� medusa pro. �� boit �� .dong ��

Moustaphaabdi — Sat, 31 Jan 2026 12:15:45 GMT

�� .
�� jtag � medusa pro. � �� ufs.�emmc.��.nand.
�� .�� medusa pro. �� jtag boit �� .dong ��
�� .

�� OPPO A3S CPH

allttar — Sat, 01 Jul 2023 23:12:43 GMT

OPPO CPH1803

Welcome to Medusa Pro Software version 2.2.4.7.
Started.
Reader #0: Generic EMV Smartcard Reader 0

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Samsung eMMC QE63MB
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info

CID : 150100514536334D420366C1F0AB756B
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QE63MB
Full name one from : KMQE60013M-B318
Product revision : 0.3
Product serial number : (hex) 66C1F0AB
Manufacturing date : 07/2018
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x01) RST_n signal is permanently enabled

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file F:/Program Files/Medusa Pro Software/EXT_CSD Backups/QE63MB_01_07_2023_23_49_27.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.4.7; FW: 1.24.
P00: GPT (00000000, 00000028) 20 KB
P01: oppodycnvbk (00000028, 00005000) 10 MB
P02: oppostanvbk (00005028, 00005000) 10 MB
P03: modemst1 (0000A028, 00000C00) 1536 KB
P04: modemst2 (0000AC28, 00000C00) 1536 KB
P05: persist (0000B828, 00010000) 32 MB
P06: opporeserve1 (0001B828, 00004000) 8 MB
P07: opporeserve2 (0001F828, 00020000) 64 MB
P08: reserve_exp1 (0003F828, 00001000) 2048 KB
P09: reserve_exp2 (00040828, 00001000) 2048 KB
P10: fsc (00041828, 00000002) 1024 b
P11: ssd (00041830, 00000010) 8 KB
P12: sbl1 (00041840, 00000400) 512 KB
P13: rpm (00041C40, 00000400) 512 KB
P14: tz (00042040, 00001000) 2048 KB
P15: devcfg (00043040, 00000200) 256 KB
P16: sbl1bak (00043240, 00000400) 512 KB
P17: rpmbak (00043640, 00000400) 512 KB
P18: tzbak (00043A40, 00001000) 2048 KB
P19: devcfgbak (00044A40, 00000200) 256 KB
P20: dsp (00044C40, 00008000) 16 MB
P21: DDR (00050000, 00000040) 32 KB
P22: fsg (00050040, 00000C00) 1536 KB
P23: sec (00050C40, 00000020) 16 KB
P24: aboot (00050C60, 00000800) 1024 KB
P25: abootbak (00051460, 00000800) 1024 KB
P26: modem (00051C60, 00040000) 128 MB
P27: dtbo (00091C60, 00004000) 8 MB
P28: vbmeta (00095C60, 00000080) 64 KB
P29: boot (00095CE0, 00020000) 64 MB
P30: recovery (000B5CE0, 00020000) 64 MB
P31: devinfo (000D5CE0, 00000800) 1024 KB
P32: splash (000D8000, 00005800) 11 MB
P33: LOGO (000DD800, 00010000) 32 MB
P34: DRIVER (000ED800, 00010000) 32 MB
P35: cache (000FD800, 00080000) 256 MB
P36: misc (0017D800, 00000800) 1024 KB
P37: keystore (0017E000, 00000400) 512 KB
P38: config (0017E400, 00000040) 32 KB
P39: oem (0017E440, 00000800) 1024 KB
P40: limits (00180000, 00000040) 32 KB
P41: mota (00184000, 00000400) 512 KB
P42: dip (00184400, 00000800) 1024 KB
P43: mdtp (00184C00, 00010000) 32 MB
P44: syscfg (00194C00, 00000400) 512 KB
P45: mcfg (00195000, 00002000) 4 MB
P46: lksecapp (00198000, 00000100) 128 KB
P47: cmnlib (00198100, 00000800) 1024 KB
P48: cmnlib64 (00198900, 00000800) 1024 KB
P49: keymaster (00199100, 00000800) 1024 KB
P50: lksecappbak (00199900, 00000100) 128 KB
P51: cmnlibbak (00199A00, 00000800) 1024 KB
P52: cmnlib64bak (0019A200, 00000800) 1024 KB
P53: keymasterbak (0019AA00, 00000800) 1024 KB
P54: apdp (0019C000, 00000200) 256 KB
P55: msadp (0019C200, 00000200) 256 KB
P56: dpo (0019C400, 00000010) 8 KB
P57: logdump (0019C410, 00020000) 64 MB
P58: vm-kystore (001BC410, 00000800) 1024 KB
P59: vm-data (001BCC10, 00005000) 10 MB
P60: hyp (001C4000, 00004000) 8 MB
P61: vm-system (001C8000, 00020000) 64 MB
P62: vm-linux (001E8000, 00010000) 32 MB
P63: system (001F8000, 006B4800) 3433 MB
P64: vendor (008AC800, 0020FB00) 1055 MB
P65: userdata (00AC0000, 0125EFDF) 9.186 GB
Backuping modemst1 partition...
Opening F:/Program Files/Medusa Pro Software/Backups/QE63MB_modemst1_0xa028_0xc00_01_07_2023_23_49_27.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:02
SW: 2.2.4.7; FW: 1.24.
Backuping modemst2 partition...
Opening F:/Program Files/Medusa Pro Software/Backups/QE63MB_modemst2_0xac28_0xc00_01_07_2023_23_49_27.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:02
SW: 2.2.4.7; FW: 1.24.
Backuping fsg partition...
Opening F:/Program Files/Medusa Pro Software/Backups/QE63MB_fsg_0x50040_0xc00_01_07_2023_23_49_27.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:02
SW: 2.2.4.7; FW: 1.24.

---------------------------------------------------------------
Searching Android build info...
Ok

Disk/Image size : a3e00000 bytes
Device sector size : 512 bytes
Partition offset : 2064384
Number of sectors : 7030784
Device Manufacturer : OPPO
Build ID : OPM1.171019.026
Release ID : 8.1.0
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20200710.012336 release-keys

---------------------------------------------------------------
Reset operation finished
Disconnected.

�� *** �� 2

adelaowd — Sun, 05 Feb 2023 07:11:11 GMT

��
�� 2

�� frp ta1322

allttar — Tue, 04 Oct 2022 11:18:37 GMT

��
��

1factoty repaire
rest optione
rest frp
�� persist

��

partesion manager

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Samsung eMMC GP6BAB
Page size : 512 B
Block size : 512 B
Block count : 122142720
Size : 58.24 GB (59640.00 MB)
---------------------------------------------------------------
CID Info

CID : 15010047503642414205B422E4F71827
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : GP6BAB
Product revision : 0.5
Product serial number : (hex) B422E4F7
Manufacturing date : 01/2021
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes

Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x01) RST_n signal is permanently enabled

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 20357120 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/GP6BAB_04_10_2022_10_56_55.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.4.3; FW: 1.24.
P00: GPT (00000000, 00020000) 64 MB
P01: modem (00020000, 0002A000) 84 MB
P02: DDR (0004A000, 00000040) 32 KB
P03: fsgcombine (0004A040, 00002000) 4 MB
P04: fsg (0004C040, 00000C00) 1536 KB
P05: sec (0004CC40, 00000020) 16 KB
P06: aboot (0004CC60, 00000800) 1024 KB
P07: abootbak (0004D460, 00000800) 1024 KB
P08: dtbo (0004DC60, 00004000) 8 MB
P09: dtbobak (00051C60, 00004000) 8 MB
P10: vbmeta (00055C60, 00000080) 64 KB
P11: vbmetabak (00055CE0, 00000080) 64 KB
P12: boot (00055D60, 00010000) 32 MB
P13: recovery (00065D60, 00018000) 48 MB
P14: devinfo (0007DD60, 00000800) 1024 KB
P15: super (0007E560, 004CC000) 2456 MB
P16: vbmeta_system (0054A560, 00000080) 64 KB
P17: limits (0054A5E0, 00000040) 32 KB
P18: cmnlib (0054A620, 00000800) 1024 KB
P19: cmnlibbak (0054AE20, 00000800) 1024 KB
P20: cmnlib64 (0054B620, 00000800) 1024 KB
P21: cmnlib64bak (0054BE20, 00000800) 1024 KB
P22: keymaster (0054C620, 00000400) 512 KB
P23: keymasterbak (0054CA20, 00000400) 512 KB
P24: fsc (00560000, 00000002) 1024 b
P25: ssd (00560008, 00000010) 8 KB
P26: sbl1 (00560018, 00000400) 512 KB
P27: sbl1bak (00560418, 00000400) 512 KB
P28: rpm (00560818, 00000400) 512 KB
P29: rpmbak (00560C18, 00000400) 512 KB
P30: tz (00561018, 00001000) 2048 KB
P31: tzbak (00562018, 00001000) 2048 KB
P32: devcfg (00563018, 00000200) 256 KB
P33: devcfgbak (00563218, 00000200) 256 KB
P34: dsp (00563418, 00008000) 16 MB
P35: modemst1 (0056B418, 00000C00) 1536 KB
P36: modemst2 (0056C018, 00000C00) 1536 KB
P37: splash (0056CC18, 00005800) 11 MB
P38: cache (00572418, 00037000) 110 MB
P39: persist (005A9418, 00010000) 32 MB
P40: metadata (005B9418, 00008000) 16 MB
P41: misc (005C1418, 00000800) 1024 KB
P42: keystore (005C1C18, 00000400) 512 KB
P43: config (005C2018, 00000040) 32 KB
P44: oem (005C2058, 00004000) 8 MB
P45: btui (005C6058, 00002800) 5 MB
P46: mota (005C8858, 00000400) 512 KB
P47: dip (005C8C58, 00000800) 1024 KB
P48: mdtp (005C9458, 00010000) 32 MB
P49: syscfg (005D9458, 00000400) 512 KB
P50: mcfg (005D9858, 00002000) 4 MB
P51: apdp (005DB858, 00000200) 256 KB
P52: msadp (005DBA58, 00000200) 256 KB
P53: dpo (005DBC58, 00000010) 8 KB
P54: elabel (005E0000, 0000A000) 20 MB
P55: userdata (00600000, 06E7BFDF) 55.24 GB
Backuping fsg partition...
Opening C:/Program Files/Medusa Pro Software/Backups/GP6BAB_fsg_0x4c040_0xc00_04_10_2022_10_56_55.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:02
SW: 2.2.4.3; FW: 1.24.
Backuping modemst1 partition...
Opening C:/Program Files/Medusa Pro Software/Backups/GP6BAB_modemst1_0x56b418_0xc00_04_10_2022_10_56_55.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:02
SW: 2.2.4.3; FW: 1.24.
Backuping modemst2 partition...
Opening C:/Program Files/Medusa Pro Software/Backups/GP6BAB_modemst2_0x56c018_0xc00_04_10_2022_10_56_55.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:02
SW: 2.2.4.3; FW: 1.24.

---------------------------------------------------------------
Searching Android build info...
Ok

Disk/Image size : 8f800000 bytes
Device sector size : 512 bytes
Partition offset : 517472
Number of sectors : 5029888
Build ID : RKQ1.210215.001
Display Build ID : 00WW_2_160_SP04
Release ID : 11
Architecture ABI : armeabi-v7a
Architecture ABI2 : armeabi
Architecture ABI List : armeabi-v7a,armeabi
Build Description 2 : 00WW_2_16D

---------------------------------------------------------------
Backuping FRP data...
Opening C:/Program Files/Medusa Pro Software/Backups/FRP_0x5c2018_0x40_04_10_2022_10_57_26.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.4.3; FW: 1.24.
Removing FRP. Please wait... Done.
Perform a Factory data reset from the phone menu.
SW: 2.2.4.3; FW: 1.24.
Disconnected.

�� nokia 1.4 ta1322

allttar — Sat, 10 Sep 2022 19:44:04 GMT

��
�� spi+��
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Samsung eMMC GP6BAB
Page size : 512 B
Block size : 512 B
Block count : 122142720
Size : 58.24 GB (59640.00 MB)
---------------------------------------------------------------
CID Info

CID : 15010047503642414205B422E4F71827
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : GP6BAB
Product revision : 0.5
Product serial number : (hex) B422E4F7
Manufacturing date : 01/2021
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes

Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x01) RST_n signal is permanently enabled

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 20357120 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/GP6BAB_10_09_2022_18_37_37.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.4.3; FW: 1.24.
P00: GPT (00000000, 00020000) 64 MB
P01: modem (00020000, 0002A000) 84 MB
P02: DDR (0004A000, 00000040) 32 KB
P03: fsgcombine (0004A040, 00002000) 4 MB
P04: fsg (0004C040, 00000C00) 1536 KB
P05: sec (0004CC40, 00000020) 16 KB
P06: aboot (0004CC60, 00000800) 1024 KB
P07: abootbak (0004D460, 00000800) 1024 KB
P08: dtbo (0004DC60, 00004000) 8 MB
P09: dtbobak (00051C60, 00004000) 8 MB
P10: vbmeta (00055C60, 00000080) 64 KB
P11: vbmetabak (00055CE0, 00000080) 64 KB
P12: boot (00055D60, 00010000) 32 MB
P13: recovery (00065D60, 00018000) 48 MB
P14: devinfo (0007DD60, 00000800) 1024 KB
P15: super (0007E560, 004CC000) 2456 MB
P16: vbmeta_system (0054A560, 00000080) 64 KB
P17: limits (0054A5E0, 00000040) 32 KB
P18: cmnlib (0054A620, 00000800) 1024 KB
P19: cmnlibbak (0054AE20, 00000800) 1024 KB
P20: cmnlib64 (0054B620, 00000800) 1024 KB
P21: cmnlib64bak (0054BE20, 00000800) 1024 KB
P22: keymaster (0054C620, 00000400) 512 KB
P23: keymasterbak (0054CA20, 00000400) 512 KB
P24: fsc (00560000, 00000002) 1024 b
P25: ssd (00560008, 00000010) 8 KB
P26: sbl1 (00560018, 00000400) 512 KB
P27: sbl1bak (00560418, 00000400) 512 KB
P28: rpm (00560818, 00000400) 512 KB
P29: rpmbak (00560C18, 00000400) 512 KB
P30: tz (00561018, 00001000) 2048 KB
P31: tzbak (00562018, 00001000) 2048 KB
P32: devcfg (00563018, 00000200) 256 KB
P33: devcfgbak (00563218, 00000200) 256 KB
P34: dsp (00563418, 00008000) 16 MB
P35: modemst1 (0056B418, 00000C00) 1536 KB
P36: modemst2 (0056C018, 00000C00) 1536 KB
P37: splash (0056CC18, 00005800) 11 MB
P38: cache (00572418, 00037000) 110 MB
P39: persist (005A9418, 00010000) 32 MB
P40: metadata (005B9418, 00008000) 16 MB
P41: misc (005C1418, 00000800) 1024 KB
P42: keystore (005C1C18, 00000400) 512 KB
P43: config (005C2018, 00000040) 32 KB
P44: oem (005C2058, 00004000) 8 MB
P45: btui (005C6058, 00002800) 5 MB
P46: mota (005C8858, 00000400) 512 KB
P47: dip (005C8C58, 00000800) 1024 KB
P48: mdtp (005C9458, 00010000) 32 MB
P49: syscfg (005D9458, 00000400) 512 KB
P50: mcfg (005D9858, 00002000) 4 MB
P51: apdp (005DB858, 00000200) 256 KB
P52: msadp (005DBA58, 00000200) 256 KB
P53: dpo (005DBC58, 00000010) 8 KB
P54: elabel (005E0000, 0000A000) 20 MB
P55: userdata (00600000, 06E7BFDF) 55.24 GB
Backuping fsg partition...
Opening C:/Program Files/Medusa Pro Software/Backups/GP6BAB_fsg_0x4c040_0xc00_10_09_2022_18_37_37.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.4.3; FW: 1.24.
Backuping modemst1 partition...
Opening C:/Program Files/Medusa Pro Software/Backups/GP6BAB_modemst1_0x56b418_0xc00_10_09_2022_18_37_37.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.4.3; FW: 1.24.
Backuping modemst2 partition...
Opening C:/Program Files/Medusa Pro Software/Backups/GP6BAB_modemst2_0x56c018_0xc00_10_09_2022_18_37_37.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.4.3; FW: 1.24.

---------------------------------------------------------------
Searching Android build info...
Ok

Disk/Image size : 8f800000 bytes
Device sector size : 512 bytes
Partition offset : 517472
Number of sectors : 5029888
Build ID : RKQ1.210215.001
Display Build ID : 00WW_2_160_SP04
Release ID : 11
Architecture ABI : armeabi-v7a
Architecture ABI2 : armeabi
Architecture ABI List : armeabi-v7a,armeabi
Build Description 2 : 00WW_2_16D

---------------------------------------------------------------
Partition table has been found on device.
Erasing. Please wait...
Erasing partition userdata... Done.
Erasing is finished.
SW: 2.2.4.3; FW: 1.24.

��

1NOKIA1.4 TA1322.gif‏ (219.4 ��)

�� 2

alharb — Tue, 05 Apr 2022 12:52:35 GMT

�� 2

�� Medusa PRO v.2.2.4.2

ProfKefah — Fri, 25 Mar 2022 15:30:30 GMT

Release Notes:

- Added Factory Repair operation for "MTK General mode".
- Improved Reset FRP on devices with UFS flash drive.
- Added additional improvements for the UI.

��

https://medusabox.com/files/softs/me...ro_2.2.4.2.exe

�� Medusa PRO v.2.2.4

ProfKefah — Thu, 03 Mar 2022 17:08:32 GMT

Release Notes:

- Added new "MTK General" USB mode (Read/Write/Erase partitions and RPMB partition, Partition Manager).

- Added UFS3.1 support and partitioning (working with DESCRIPTOR).
- Added automatic conversion of CONFIG DESCRIPTOR to the required specification

- Adding "Reset MI Account" function.
Note: The function is in - "Factory repair" / "Reset options" / "Reset MI Account".
Tested on phones: "Xiaomi Poco M3", "Xiaomi Redmi Note 9 Pro".

- Improved "USB EDL mode".
- Extended connection log. Displayed information from the CPU of the phone: "CpuID", "HW_ID", "CPU_HASH".
- Improved connection to "Qualcomm 9008 port".
- Added automatic search and loading of loaders in "Auto Detect"/"Auto Detect UFS" modes for some phone models.

- Added "Reset RPMB Kingston" function (only for eMMC "Kingston").
Note: The function is in - "eMMC Service" / "Kingston RPMB Reset".
Warning: You use this function at your own risk!
Warning: This feature may corrupt your eMMC and the data on it!

- Added support for the following models via UFS:
SAMSUNG UFS SM-G930F_U8 � Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Hadi Sajjadi)
SAMSUNG UFS SM-G950F_UB - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Hadi Sajjadi)
SAMSUNG UFS SM-G955F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Hadi Sajjadi)

- Added new eMMC FW (FFU) from users:
Note: Available for download: eMMC Service/eMMC firmware/Download users eMMC firmware(s)
Warning: USERS eMMC firmwares are not tested!
Writing USERS firmware can break your eMMC!
All data will be erased!
KMGX6001BM-B514 (thanks to Mr. Hadi Sajjadi)
��

https://medusabox.com/files/softs/me...0pro_2.2.4.exe

srf file oppo a3s cph1803

gsm4sirt — Mon, 28 Feb 2022 03:17:41 GMT

��
��
��
srf file oppo a3s cph1803

��

Untitled.jpg

��

Untitled.jpg‏ (87.8 ��)

�� G318H

allttar — Sun, 12 Sep 2021 17:58:21 GMT

��
�� G318HDS

Welcome to Medusa Pro Software version 2.2.2

.

Started.
Reader #0: Generic EMV Smartcard Reader 1

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Hynix eMMC H4G2b
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info

CID : 90014A4834473262110126EB04F492AF
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G2b
Product revision : 0.1
Product serial number : (hex) 26EB04F4
Manufacturing date : 09/2015
---------------------------------------------------------------
CSD Info

CSD : D07F01320F5903FFFFFFFFEF8A4040DB
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G2b_12_09_2021_17_46_29.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.2; FW: 1.24.

---------------------------------------------------------------
Searching Android build info...
Not found
---------------------------------------------------------------
Erasing. Please wait... Done.
SW: 2.2.2; FW: 1.24.
Disconnected.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G318HDS
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G318HDS_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Hynix eMMC H4G2b
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info

CID : 90014A4834473262110126EB04F492AF
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G2b
Product revision : 0.1
Product serial number : (hex) 26EB04F4
Manufacturing date : 09/2015
---------------------------------------------------------------
CSD Info

CSD : D07F01320F5903FFFFFFFFEF8A4040DB
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G2b_12_09_2021_17_46_53.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.2; FW: 1.24.

---------------------------------------------------------------
Searching Android build info...
Not found
---------------------------------------------------------------
Erasing. Please wait... Done.
SW: 2.2.2; FW: 1.24.
Factory Format will erase all eMMC data!
Do you want to continue? Yes.
Formating...Done.
SW: 2.2.2; FW: 1.24.
Disconnected.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G318HDS
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G318HDS_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Hynix eMMC H4G2b
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info

CID : 90014A4834473262110126EB04F492AF
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G2b
Product revision : 0.1
Product serial number : (hex) 26EB04F4
Manufacturing date : 09/2015
---------------------------------------------------------------
CSD Info

CSD : D07F01320F5903FFFFFFFFEF8A4040DB
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G2b_12_09_2021_17_47_52.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.2; FW: 1.24.

---------------------------------------------------------------
Searching Android build info...
Not found
---------------------------------------------------------------
No General Purpose Partition 1
enhanced attribute is not set
write reliablity is set

No General Purpose Partition 2
enhanced attribute is not set
write reliablity is set

No General Purpose Partition 3
enhanced attribute is not set
write reliablity is set

No General Purpose Partition 4
enhanced attribute is not set
write reliablity is set

No enhanced user data area
write reliablity is set

Creating HW partitions succesfully complete!
Disconnected.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G318HDS
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G318HDS_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Hynix eMMC H4G2b
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info

CID : 90014A4834473262110126EB04F492AF
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G2b
Product revision : 0.1
Product serial number : (hex) 26EB04F4
Manufacturing date : 09/2015
---------------------------------------------------------------
CSD Info

CSD : D07F01320F5903FFFFFFFFEF8A4040DB
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x1
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G2b_12_09_2021_17_48_04.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.2; FW: 1.24.

---------------------------------------------------------------
Searching Android build info...
Not found
---------------------------------------------------------------
Writing EXT_CSD succesfully complete!
Disconnected.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G318HDS
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G318HDS_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Hynix eMMC H4G2b
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info

CID : 90014A4834473262110126EB04F492AF
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G2b
Product revision : 0.1
Product serial number : (hex) 26EB04F4
Manufacturing date : 09/2015
---------------------------------------------------------------
CSD Info

CSD : D07F01320F5903FFFFFFFFEF8A4040DB
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x1
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G2b_12_09_2021_17_48_59.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.2; FW: 1.24.

---------------------------------------------------------------
Searching Android build info...
Not found
---------------------------------------------------------------
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G318HDS_EMMC.srf".
Write data verification is enabled.

Switched to boot area partition 1.
Writing BOOT1 partition... Done.

Switched to user area.
Writing GPT partition... Done.
Writing SBOOT partition... Done.
Writing SBOOT2 partition... Done.
Writing wfixnv1 partition... Done.
Writing wfixnv2 partition... Done.
Writing tdfixnv1 partition... Done.
Writing tdfixnv2 partition... Done.
Writing WDSP partition... Done.
Writing MODEM partition... Done.
Writing MODEM2 partition... Done.
Writing TDDSP partition... Done.
Writing FOTA_SIG partition... Done.
Writing wruntimenv1 partition... Done.
Writing wruntimenv2 partition... Done.
Writing tdruntimenv1 partition... Done.
Writing tdruntimenv2 partition... Done.
Writing PARAM partition... Done.
Writing efs partition... Done.
Writing prodnv partition... Done.
Writing RESERVED2 partition... Done.
Writing KERNEL partition... Done.
Writing RECOVERY partition... Done.
Writing PERSDATA partition... Done.

Smart Repair is successfully complete.
SW: 2.2.2; FW: 1.24.
Disconnected.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G318HDS
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G318HDS_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Hynix eMMC H4G2b
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info

CID : 90014A4834473262110126EB04F492AF
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G2b
Product revision : 0.1
Product serial number : (hex) 26EB04F4
Manufacturing date : 09/2015
---------------------------------------------------------------
CSD Info

CSD : D07F01320F5903FFFFFFFFEF8A4040DB
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x1
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G2b_12_09_2021_17_51_55.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.2; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: SBOOT (00002000, 00001000) 2048 KB
P02: SBOOT2 (00003000, 00001000) 2048 KB
P03: wfixnv1 (00004000, 00000800) 1024 KB
P04: wfixnv2 (00004800, 00000800) 1024 KB
P05: tdfixnv1 (00005000, 00000800) 1024 KB
P06: tdfixnv2 (00005800, 00000800) 1024 KB
P07: WDSP (00006000, 00002000) 4 MB
P08: MODEM (00008000, 00004000) 8 MB
P09: MODEM2 (0000C000, 00004000) 8 MB
P10: TDDSP (00010000, 00002000) 4 MB
P11: FOTA_SIG (00012000, 00000800) 1024 KB
P12: wruntimenv1 (00012800, 00000800) 1024 KB
P13: wruntimenv2 (00013000, 00000800) 1024 KB
P14: tdruntimenv1 (00013800, 00000800) 1024 KB
P15: tdruntimenv2 (00014000, 00000800) 1024 KB
P16: PARAM (00014800, 00001000) 2048 KB
P17: efs (00015800, 0000A000) 20 MB
P18: prodnv (0001F800, 00002800) 5 MB
P19: RESERVED2 (00022000, 00000800) 1024 KB
P20: KERNEL (00022800, 00008000) 16 MB
P21: RECOVERY (0002A800, 00008000) 16 MB
P22: PERSDATA (00032800, 00004800) 9 MB
P23: CSC (00037000, 00064000) 200 MB
P24: system (0009B000, 00203000) 1030 MB
P25: HIDDEN (0029E000, 0001D000) 58 MB
P26: userdata (002BB000, 00486000) 2316 MB
Backuping efs partition...
Opening C:/Program Files/Medusa Pro Software/Backups/H4G2b_efs_0x15800_0xa000_12_09_2021_17_51_55.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:30
SW: 2.2.2; FW: 1.24.

---------------------------------------------------------------
Searching Android build info...

��

asaad wahsh — Tue, 06 Apr 2021 11:45:06 GMT

�� 
�� ffu ��

��

��

��

�� medusa pro

�� medusa pro ii

�� ufs �� ffu

��

��

�� ffu ��

��

��
��

Medusa PRO II v.2.2.0 is out!

abbassat1974 — Thu, 11 Feb 2021 10:11:47 GMT

Medusa PRO v.2.2.0 is out!

Medusa PRO v.2.2.0 Release Notes:

- Added OFP extractor. (Factory repair-> Unpack OFP firmware (*.ofp))

- Added support eMMC firmware for the following models:

KMK8X000VM-B412
KMKYL000VM-B603
KMNJS000ZM-B205
KMQ310013M-B419
KMRH60014M-B614
KLM8G2YE4C-C001
KLMCG2UCTA-B041
KMJ5X000WM-B413
KMK5U000VM-B309

- Added new eMMC FW (FFU) from users:

KMGD6001BM-B421 (thanks to Mr. suriyas1)
KMDH6001DA-B422 (thanks to Mr. suriyas1)
KMR31000BA-B614 (thanks to Mr. babak_nuri)
KMRX1000BM-B614 (thanks to Mr. babak_nuri)
BJTD4R (thanks to Mr. farshad_ras)
CKTM4R (thanks to Mr. farshad_ras)

Note: Available for download: eMMC Service/eMMC firmware/Download users eMMC firmware(s).

Warning: USERS eMMC firmwares are not tested!
Writing USERS firmware can break your eMMC!
All data will be erased!
We work with 100+ SAMSUNG eMMC firmwares!

Medusa - Ultimate Breakthrough in the Phone Repair!

Download Medusa PRO Software v.2.2.0

Post Medusa PRO II v.2.1.4 is out!

abbassat1974 — Fri, 16 Oct 2020 05:29:07 GMT

Medusa PRO v.2.1.4 is out!

Medusa PRO v.2.1.4 Release Notes:

- Added support to work via ADB (without box).

- Added support for the following models via USB:

Wiko Freddy � Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. dahmani)
10.or GV1.0.82 (Android 8.1.0) � Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. PIJUSH DAS)
Asus Zenfone Selfie Z00UD (Android6.0.1) � Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. PIJUSH DAS)
Samsung SM-A705MN (U5) � Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. yosbel182us)

- Added support for the following models via eMMC:

Asus X00TD (Zenfone Max Pro M1_64GB) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. PIJUSH DAS)
Samsung SM-A217F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. PIJUSH DAS)
Samsung SM-A600G (DXU8CTG1) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. PIJUSH DAS)
Samsung SM-T230 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files By (thanks to Mr. PIJUSH DAS)
Xiaomi Redmi Note 8T - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Tecnoservicel)
Meizu M6s (M712H) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Wolodya)
Nokia Lumia 710 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Wolodya)
Samsung GT-I9060 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Wolodya)
Samsung SM-T585 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Wolodya)
Xiaomi Redmi 5A - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Wolodya)

The equipment to work with NAND:
"SOLDERING ADAPTER NAND TSOP-48, LGA-52, LGA-60" available after October 17, please stay tuned.
"Socket NAND SOCKET TSOP-48" and "NAND SOCKET LGA52, LGA-60" will be available soon...

- Improved writing in PPN NAND.

- Added support for ONFI NAND (8b/16b bus width):

READ (with and without spare data)
WRITE (with and without spare data)
ERASE

- Supported devices:

ATO
AFND5608S1, AFND5608U1, AFND5616S1, AFND5616U1, AFND1208S1, AFND1208U1, AFND1216S1, AFND1216U1, AFND1G08U3

Cypress
S34ML01G100, S34ML02G100, S34ML04G100, S34ML08G101, S34ML08G101XXX20, S34ML02G104, S34ML04G104, S34ML01G200,
S34ML02G200, S34ML04G200, S34ML08G201, S34ML16G202, S34ML16G202XXX20, S34ML01G204, S34ML02G204, S34ML04G204,
S34MS01G100, S34MS02G100, S34MS04G100, S34MS01G104, S34MS02G104, S34MS04G104, S34MS01G200, S34MS02G200,
S34MS04G200, S34MS01G204, S34MS02G204, S34MS04G204, S34MS08G201, S34MS16G202

Dosilicon
FMND1G08U3D, FMND1G16U3D, FMND1G08L3D, FMND1G16L3D, FMND1G08S3D, FMND1G16S3D, FMND2G08U3D, FMND2G16U3D,
FMND2G08L3D, FMND2G16L3D, FMND2G08S3D, FMND2G16S3D

Elite
F59L512M81A, F59L1G81A, F59L1G81MA, F59L2G81A, F59L4G81A, F59D1G81A, F59D2G81A, F59D4G81A, F59D1G161A,
F59D2G161A, F59D4G161A

Eon
EN27LN1G08, EN27LN2G08, EN27LN4G08, EN27SN1G08

GigaDevice
GD9FU1G8F2A, GD9FU1G6F2A, GD9FS1G8F2A, GD9FS1G6F2A

Hitachi
HN29V1G91T

Hynix
H27U518S2C, H27U1G8F2B, H27U2G8F2C, H27S2G6F2C, H27U4G8F2D, H27U4G6F2D, H27S1G8F2B, H27S4G8F2D, H27S4G6F2D,
H27U8G8G5D, H27U8G8F2B, HY27US08281, HY27US16281, HY27US08561, HY27SS08561, HY27US16561, HY27SS16561,
HY27US08121, HY27SS08121, HY27US16121, HY27SS16121, HY27UA081G1, HY27US081G1, HY27SA081G1, HY27UA161G1,
HY27US161G1, HY27SA161G1, HY27UB082G4, HY27US082G4, HY27UF081G2, HY27SF081G2, HY27UF161G2, HY27SF161G2,
HY27UF082G2, HY27UF162G2, HY27UG082G2, HY27SG082G2, HY27UG162G2, HY27SG162G2, HY27UF084G2, HY27UF164G2,
HY27UG084G2, HY27UG164G2, HY27UH084G2, HY27SH084G2, HY27UH164G2, HY27SH164G2, HY27UG088G2, HY27UG088G5,
HY27UH088G2, HY27UH08AG5

Integrated
IS34ML01G081, IS34ML02G081, IS34ML04G081, IS34ML01G084, IS34ML02G084, IS34ML04G084, IS35ML01G081, IS35ML02G081,
IS35ML04G081, IS35ML01G084, IS35ML02G084, IS35ML04G084, IS34MW01G084, IS34MW01G164, IS34MW02G084, IS34MW02G164,
IS34MW04G084, IS34MW04G164, IS35MW01G084, IS35MW01G164, IS35MW02G084, IS35MW02G164, IS35MW04G084, IS35MW04G164

Macronix
MX30LF1208AA, MX30LF1G08AA

Micron
MT29F1G08ABAXA, MT29F2G08ABAXA, MT29F4G08ABAXA, MT29F8G08ABAXA, MT29F1G08ABBXA, MT29F2G08ABBXA, MT29F4G08ABBXA,
MT29F8G08ABBXA, MT29F1G16ABAXA, MT29F2G16ABAXA, MT29F4G16ABAXA, MT29F8G16ABAXA, MT29F1G16ABBXA, MT29F2G16ABBXA,
MT29F4G16ABBXA, MT29F8G16ABBXA, MT29F1G08AAB, MT29F1G08ABB, MT29F1G16ABB, MT29F1G08AAC, MT29F1G08ABC,
MT29F1G16ABC, MT29F2G08AAB, MT29F4G08BAB, MT29F8G08FAB, MT29F2G16AAB, MT29F4G16BAB, MT29F2G08AAC, MT29F4G08BAC,
MT29F8G08FAC, MT29F2G08ABC, MT29F2G16ABC, MT29F2G08AAD, MT29F2G16AAD, MT29F2G08ABD, MT29F2G16ABD, MT29F4G08AAA,
MT29F8G08BAA, MT29F8G08DAA, MT29F16G08FAA, MT29F8G08AAA, MT29F16G08DAA

Numonyx
NAND128W3A, NAND256W3A, NAND256W4A, NAND512R3A, NAND512W3A, NAND512R4A, NAND512W4A

Samsung
K9LBG08U0M, K9F2808Q0B, K9F5608B0D, K9F5608D0C, K9F5608D0D, K9F5608Q0B, K9F5608Q0C, K9F5616U0C, K9F5616D0C,
K9F5616Q0C, K9F1208U0M, K9F1208U0A, K9F1208U0B, K9F1208U0C, K9F1208B0B, K9F1208B0C, K9F1208D0A, K9F1208D0C,
K9F1208Q0C, K9F1216D0A, K9F1216U0A, K9F1216U0C, K9F1216D0C, K9F1216Q0C, K9F1G08U0M, K9F1G08U0A, K9F1G08U0B,
K9F1G08U0C, K9F1G08U0D, K9F1G08U0E, K9F1G08B0C, K9F1G08D0M, K9F1G08D0A, K9F1G08Q0M, K9F1G08Q0A, K9F1G16U0M,
K9F1G16D0M, K9F1G16Q0M, K9F2G08U0M, K9F2G08U0A, K9F2G08Q0M, K9F2G16U0M, K9F2G16Q0M, K9F4G08U0M, K9F4G08U0A,
K9E2G08U0M, K9K1208U0A, K9K1208U0M, K9K1208Q0C, K9K1208D0C, K9K1208U0C, K9K1216Q0C, K9K1216D0C, K9K1216U0C,
K9K1G08U0M, K9K1G08U0A, K9K1G08Q0A, K9K1G16U0A, K9K2G08U0M, K9K2G08U0A, K9K2G08Q0M, K9K2G16U0M, K9K2G16Q0M,
K9K4G08U0M, K9K4G08U1M, K9K4G08Q0M, K9K4G16U0M, K9K4G16Q0M, K9K8G08U0M, K9K8G08U1M, K9K8G08U0A, K9K8G08U1A,
K9T1G08B0M, K9W4G08U1M, K9W4G16U1M, K9W8G08U1M, K9WAG08U1M, K9WAG08U1A, K9G4G08U0A, K9G4G08B0A, K9G8G08U0M,
K9GAG08U0M, K9LAG08U1M, K9GAG08U0E, K9LBG08U0E, K9HCG08U1E, K9F2808U0M, K9F2808U0A, K9F2808U0B, K9F2808U0C,
K9F2816U0C, K9F5608U0M, K9F5608U0A, K9F5608U0B, K9F5608U0C, K9F5608U0D, K9F5616U0B, K9K5608U0M, KM29U128,
KM29U256

STMicroelectronics
NAND256R3A, NAND256R4A, NAND01GR3A, NAND01GW3A, NAND01GR4A, NAND01GW4A, NAND01GR3B, NAND01GW3B, NAND01GR4B,
NAND01GW4B, NAND02GR3B, NAND02GW3B, NAND02GR4B, NAND02GW4B, NAND04GR3B, NAND04GW3B, NAND04GW3C, NAND08GW3B,
NAND08GW3C

Winbond
W29N01GV, W29N01HV, W29N01GZ, W29N01GW, W29N01HZ, W29N01HW, W29N02GV, W29N02GZ, W29N02GW, W29N04GV, W29N04GZ,
W29N04GW, W29N08GV, W29N08GV*D, W29N08GZ, W29N08GW

Zentel
A5U12A31ATS, A5U1GA31ATS, A5U1GA41ATS, A5U2GA31BTS, A5U4GA31ATS

Toshiba
TC58128F, TC58128AF, TC58256F, TC58256AF, TC58512FT, TH58512FT, TH58100FT, TC58DVM72A1, TC58DVM72F1, TC58DVM82A1,
TC58DVM82F1, TC58DVM92A1, TC58DVG02A1, TC58DVG3S0E, TC58NVM9S3E, TC58NVG0S3A, TC58NVG0S3E, TC58NVG1S3B, TC58NVG1S3E,
TC58NVG2S3E, TC58NYM9S3E, TC58NYG0S3E, TC58NYG1S3E, TC58NYG2S3E, TC58NVG1S8B, TC58NVG0S3H, TC58NVG1S3H, TC58NVG2S0F,
TC58NVG3S0F, TC58NVG2S0H, TC58NVG2D4B, TH58NVG1S3A, TH58NVG2S3B, TH58NVG2S8B, TH58NVG3S0H, TH58NVG3D4B, TC58BVG0S3H,
TC58BVG1S3H, TC58BVG2S0H, TC58BVG3S0H

Medusa - Ultimate Breakthrough in the Phone Repair!

Download Medusa PRO Software v.2.1.4

Medusa PRO II v.2.1.3 is out!

abbassat1974 — Fri, 02 Oct 2020 05:14:00 GMT

Medusa PRO II v.2.1.3 is out!

Medusa PRO II v.2.1.3 Release Notes:

- Added support for NAND PPN 32/64bit (LGA-52, LGA-60) with the following operations and presets for Medusa PRO II box:

Show сonfig (Read);
Backup сonfig (Read and save to file);
Erase NAND;
Restore сonfig (Write from a file);
Restore manually (Write from the following presets):

32bit PPN:

Preset for mini 1
Preset for iPhone 4s
Preset for iPhone 5
Preset for iPhone 5c
Preset for iPad 2
Preset for iPad 3
Preset for iPad 4

64bit PPN:

Preset for mini 2
Preset for mini 3
Preset for mini 4
Preset for iPad Air (iPad 5)
Preset for iPad Air 2 (iPad 6)
Preset for iPhone 5s
Preset for iPhone 6
Preset for iPhone 6 A1549
Preset for iPhone 6 A1586
Preset for iPhone 6P
Preset for iPhone 6P A1522
Preset for iPhone 6P A1524

- Supported NAND PPN:

INTEL
MT29F64G08CB

SanDisk
SDMILBCF8_128G, SDMJLBDF8_128G, SDMILBCF4_064G, SDMBLBCF4_064G, SDMFLBCB8_064G, SDMILBDF4_064G,
SDMALBB8_064G, SDMBLBBB2_016G, SDMFLBCB2_016G, SDMFLBCB4_032G, SDMALBB4_032G, SD05105_016G,
SD05102_008G

SAMSUNG
KLEAG2GW1A, KLEBG4GWCA, KLEBG4GW1A, KLECG8GW1A, K9HDG08U5A, K9HFG08U5A

SKhunix
H2JTDG8UD1CMR, H2JTDG8UD1BMS, H2JTEG8VD3MBR, H2JTEG8VD1CMS, H2JTEG8VD1AMS, H2JTEG8VD1BMR,
H2JTFG8YD1BMS, H2JTFG8YD3MBR, H2JT1T8QD1MMR, H2JTDG8UD3MBR, H2JTDG8UD2MBR, H2JTFG8PD1MMR,
H2DTDG8VD1MYR, H2DTEG8VD1MYR, H2DTFG8YD1MYR, H2DTDG8UD1MYR, H2JTFG8YD1MBR, H2JTCG8T22MBR

TOSHIBA
THGBX4G7D2LLDYC, THGBX2G9D8JLA01, THGBX4G8D4LLDYC, THGBX2G7B2JLA01, THGBX2G8B4JLA01, THGBX3G8D4KLA0C,
THGBX2G9B8JLA01, THGBX3T0DBKLA0B, THGBX2T0BBJLA03, THGBX3G6D1KLA0C, THGBX2G6D1JLA01, THGBX4G9T4KLF0C,
THGBX2G8D4JLA01, THGBX3G7D2KLF0C, THGBX2G7D2JLA01, THGBX3G9D8KLA, THGVX1G7D2GLA08, THGVX1G6D2HLA01,
THGVX1G8D4GLA08, THGBX4T0T8KLF0E, TH58NVG7D2FLA89, THGVX1G9D8GLA08, THGBX5G9T4LLFXG

- Fixed parsing Qualcomm (*.xml) firmware.

- Fixed write via USB for some Huawei Qualcomm CPU based devices (9008 Mode).

- Fixed error with parsing scatter for MTK firmware.

- Improved writing MTK factory firmware from scatter.

- Added support for new preloaders format.

- Added possibility to create partition table from scatter firmware, if it has EFI format.

- Fixed error due to Factory Repair operation (Samsung firmwares).

- Improved work with UFS memory (searching Android build info feature).

- Improved work with eMMC memory type - J999 MICRON

- Added support for the following UFS flash:

SAMSUNG KLUBG4G1BD-E0B1 BGA095
SAMSUNG KLUDGAG1BD-E0B1 BGA095
SAMSUNG KLUBG4G1BD-E0B2 BGA095
SAMSUNG KLUCG8G1BD-E0B1 BGA095
SAMSUNG KLUBG4G1BE-E0B1 BGA095
SAMSUNG KLUCG8G1BD-E0B2 BGA095
SKHYNIX H28U64222MMR BGA153
SKHYNIX H28S7Q302BMR BGA153
SKHYNIX H28S8Q302CMR BGA153

- Improved smart card applet.

- Card update is required!

<

- Improved server side (old software version will not work, use only actual software version)

Medusa - Ultimate Breakthrough in the Phone Repair!

Download Medusa PRO Software v.2.1.3

samsung a920f HS-USB Diagnostics 9008

adelaowd — Fri, 14 Aug 2020 08:30:40 GMT

samsung a920f HS-USB Diagnostics 9008
��

����� ����� ���� - Medusa

����� ������ ������ ���� ��� OPPO A3S CPH

������ ���*** ������ ���2

����� ��� ������ frp ta1322

����� ��� ����� ������� nokia 1.4 ta1322

�� ����� ��� �������� ��� ��������� ��� 2

������� Medusa PRO v.2.2.4.2

������� Medusa PRO v.2.2.4

srf file oppo a3s cph1803

����� ����� ����� �G318H

���� ������ ���� ����� ����� ������� ������� �������

Medusa PRO II v.2.2.0 is out!

Post Medusa PRO II v.2.1.4 is out!

Medusa PRO II v.2.1.3 is out!

samsung a920f HS-USB Diagnostics 9008

�� - Medusa

�� OPPO A3S CPH

�� *** �� 2

�� frp ta1322

�� nokia 1.4 ta1322

�� 2

�� Medusa PRO v.2.2.4.2

�� Medusa PRO v.2.2.4

�� G318H

��