البوكس لا يعمل تشيك ولا scan هل هو عطل هاردوير ام الاصدار لاخير
البوكس لا يعمل تشيك ولا scan هل هو عطل هاردوير ام الاصدار لاخير
ارفع رساله عند عمل تشيك او سكان
لا يدخل اي جهاز test mode
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 5], SN: *********
Using device: HTI, FW ver: 00.24, SN: *********
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.19228(10-11-2011), Library ver: 1.0.0.13150(10-11-2011)
Boot error: CC CC CC 00
- Repeat the procedure. Sometimes it is a matter of temporary communication problem or similar.
- Check that all used cable are solid without any visible damage and have good contact. If possible, try with other cables.
- On rare occasions phone might be damaged or dead. So, if possible, try with another phone.
التعديل الأخير تم بواسطة AZDE842 ; 29-12-2011 الساعة 07:10 PM
حمل اخر اصدر وتابع
mobileEx_setup_v3.5_rev1.6
نفس المشكل
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 5], SN: ******
Using device: HTI, FW ver: 00.24, SN: ************
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.19663(13-12-2011), Library ver: 1.0.0.13672(13-12-2011)
Boot error: CC CC CC 00
- Repeat the procedure. Sometimes it is a matter of temporary communication problem or similar.
- Check that all used cable are solid without any visible damage and have good contact. If possible, try with other cables.
- On rare occasions phone might be damaged or dead. So, if possible, try with another phone.
اعمل ابديت hti للبكس
عملت updat ونفس المشكل
» Begin transaction ...
Initializing HTI ...
HTI initialized.
Boot version: 00.07
Serial: *******
Receive firmware from server ...
SERVER->MXKEY - BLADE Z at upd, agent version 1.2 revision 0.0
Firmware version on server: 00.50
changes:
added: boot mode switch function
improved: serial and flash bus communication routine
added: dct4 product data calc algorithm
added: broadcom sec.repair algorithm
minor bug fixed.
Received buff checksum verified OK.
Updating HTI firmware, please WAIT ...
HTI firmware update OK.
» End transaction (status: 0, Successfull)
Waiting HTI in application mode ...Done.
نفس المشكله عندى والجديد انه مش بيجيب dst4 ولا bb5
سطبت من جديد الاصدار ده mobileEx_setup_v3.5_rev1.2
وظبط يبقا عيب اصدار
ياجماعة الموضوع ده اتكرر كتير والمشكله هرد تتحل بتغير قطع من اى بوكس قديم
المفضلات