Phoenix_Service_Software_2011.24.002.46258_Cracked

[code]
كود:
Main component versions in the release:
• DK2 Driver Version 07.14.0.25
• Nokia Connectivity Cable USB Driver Version 7.1.42.0
• Flash Update Package 2011.24.000
• FLS-x Drivers Version 2.09.28
• FUSE Connection Manager v 2011.25
MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2011_14_4_45945
New Products added
• RM-754, RM-755, RM-804, RM-696, RM-774, RM-761
Products removed
• RM-738, RM-739
New features
• New version of FUSE connection Manager
• New version of Flash Update Package
• New version of Autotuning components
• New version of Product API
• New version of Connectivity Cable Driver
• Installation checks the PC for Microsoft DOT.NET 2 Service Pack 2 and    installs it automatically if PC has online connectin to Internet. If    DOT.NET version 2 SP 2 or newer is found, installation continues    normally. If PC is not connected to internet, and DOT.NET needs to be    updated installation will be aborted. In this case DOT.NET must be    updated manually before installation of Phoenix can continue
Error Corrections & changes
• Crash which occurred when Phone Information UI was open simulaneously with other menu´s has been corrected
• The Envira Tool ( The ZIP package generator in Help / Troubleshooting –    menu) now has a button to delete existing old log files. This makes  it   possible to clear old logs before reproducing / logging problems to   new  log files which are then easier to analyse.
• “No Connection” – problem, which occurred when a connection without    phone connected was selected has been corrected. Connection without    phone can now be selected.
Please note:
• Microsoft DOT.NET version 2 Service Pack 2 is now the minimum    requirement. Phoenix installation will check PC for the DOT.NET version    and update it automatically when PC has online connection. Without    online connection, old DOT.NET versions must be updated manually.
• New common data package ******** in use. Please see ******** SR1315 in KICS Information Center for further information.
• All Nokia Service Software Applications will use following ******** for product specific data:
- Windows XP: C:\********s and Settings\All Users\Application Data\Nokia\Packages
- Windows 7: C:\Program Data\Nokia\Packages
• Please see atricles SR1774 and 1786 for more information on the use of    Nokia Data Package manager – tool, and article SR1854 for more    information on the Nokia Service Application Manager Tool.
• During installation, Data Packages should be installed in these    directories, if they install to any other ******** by default. target    folder for local data packages can be changed in the installation wizard    manually
• This version contains the latest Tucson components. Therefore it is not necessary to use Tucson Add-On Installation Packages
• Before you start Phoenix or Care Suite installation to Windows 7 the    User Account Control (UAC) should be turned off from Windows Control    Panel settings.
• For more information concerning new options in “Firmware Update” –    menu and their use, Please see ********s SR1313 and SR1659 in KICS    Information Center.
• Tucson operations combined with “flash” – option are now handled in    the same way as “refurbishment”, which requires Mass Memory Content File    to be available.
• Do not use Flash option simultaneously with product code change for    USB Only phones, flash phone separately with Firmware Update
• It is recommended to use FPS-21 flash prommer with TCPIP connection    when refurbishing USB Only – phones (RM-596 etc) due to mandatory    optional MMC file size.
• Connection media to FLS-5 must be configured to be “USB_FBUS”, after    FLS-4 support has been removed FBUS does not work anymore with FLS-5
KNOWN ERRORS & LIMITATIONS
• Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept.
• Flashing with setup FLS-5, SS-46 and product specific adapter is not    supported anymore. FLS-5 can be used with other product specific cables    and adapters, but not with SS-46 Interface Adapter.
• If you install old DCT-4 data packages, Flash Update Package File    installation path may be wrong. This is caused by very old DCT-4 data    packages which contain Flash Update Package and overwrite current    information during installation. If you experience problems when    updating FPS-x prommers, please check that Phoenix “Prommer maintenance”    is looking for the files from the correct ******** which is   “C:\Program  Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will   show error  “Update via ini – file failed”. In this case, select   “Update” from that  Phoenix “Prommer maintenance” – UI, browse to   correct directory and  select “fpsxupd.ini” for all other prommers   except the FPS-8.
• Refurbishment flashing and product code change for RX-51 product requires SX-4 card to be available.
• FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21    prommer with new HW version 11 has been released to correct this. Sales    pack code is 0089J83 , old HW version is not delivered anymore. Please    see article SR1856 in KICS Information Center for the latest FPS-21   User  Guide ********
• Please refer to product specific ********s and instructions concerning the limitations of the RX-51 product
• RX-51 flashing does not work when CU-4 is used
• RX-51 Product Code changes work only without FLASH option, please flash phone separately
• When version 2010_12_8_42304 or newer with FUSE connection manager is    installed on top of older Phoenix versions, there may be an additional    delay of several minutes when you start Phoenix for the first time.    Please wait patiently; Phoenix will start after configuration is    finished.
• When using Data Package download functions with online connection,    download times may occasionally be long. This is not caused by Phoenix    (or Care Suite). The download speed from online servers is occasionally    is known to be slow, depending on how data is buffered on caching    servers.
• After you close Phoenix, it may not restart. To rectify this:
- Use Windows Task Manager to manually shut down phoenix.exe and FuseService.exe processes, or optionally restart your PC
• It is not possible to program Mass Media Content file to some devices    over direct USB cable connection, due to the large size of the file.   For  these models a feature called “Media Check” has been implemented.   When  this type of product is connected to service software / PC via   direct  USB cable the refurbishment option will be disabled. Please use  a  flash  prommer.
• To be able to use the help files in Windows 7 you need to install    Windows Help program (WinHlp32.exe) for Windows 7. Ways to locate    WinHlp32.exe:
- Start Phoenix with online connection to Internet, select “Help” and    “Phoenix help”. Click the “Microsoft Help and Support” website link.    Download WinHlp32 and install it.- Go to http://www.microsoft.com. Type “WinHlp32″ to “Search Microsoft.com” – field. Locate Windows Help program (WinHlp32.exe) for Windows 7 and install it
• When using flash prommers, only one connection type to one prommer is    allowed. Please use either NFPD USB or NFPD TCPIP connection to one    prommer, not both connections to same prommer
5. INSTALLATION
• If you have Phoenix External 2007.4.6.170 or older you must uninstall it before installing this release.
• Download Phoenix_Service_Software_2011_24_2_46258.exe application file to your computer (e.g. C:\TEMP).
• Close all other programs.
• Disconnect all flash prommers and phones which may be connected to PC    via USB connection (reconnect them only after Phoenix installation has    been completed)
• Run Phoenix_Service_Software_2011_24_2_46258 and follow instructions on the screen to install Phoenix Service Software
• If your PC does not have Microsoft DOT.NET version 2 Service Pack 2 or    newer, and PC is not connected to internet you must update DOT.NET    manually to the required version. When PC has online connection, DOT.NET    will be updated automatically.
• Connect a dongle (PK-1, PKD-1, FLS-4S, FLS-5) when message appears on the screen
• If you are prompted to update any existing driver or file versions, select “yes”.
• Depending on the operating system, the PC may require rebooting.
• Allow Windows to register the Phoenix components.
• Open Phoenix, use FUSE Connection Manager to configure connections depending on the tools you use
• If you use CU-4, please pair the connection with service adapter by selecting “pair with service adapter” – option
• Update your prommer with the latest software included in this installation package.
• Install and use the latest available product specific data packages or flash bundles
Supported operating systems and user rights
• Windows XP Service Pack 1 or higher
• When installing Phoenix into Win XP you must have local admin rights.
• When using in Win XP, user must have power user rights.
• Windows 7 32 Bit version
Phoenix_Service_Software_2011.24.002.46258_Cracked