فك شفرة LG GW300FD بنجاح

[ABOUSALMA007]

فك شفرة LG GW300FD بنجاح

اول شيء تبت الدرايفر من هنا

http://www.ziddu.com/download/122996...orMTK.exe.html

افتح البرنامج اضغط على كونيكت

ادخل الهاتف الى الحاسب عن طريق كابل يوسبي دون البطارية

v1.1.6beta
andrew_tm 2010(c)
supported models: 203
Selected model: GW300FD
Selected port: COM1
Selected speed: 115200
Please attach phone without battery!
Device found:
\\?\usb#vid_0456&pid_6588#5&af94fb4&0&1#{2236cc36-1d11-11d4-8196-0000863b0230}
Flash Info: MID=0xEC, DID=0xB1
Ping Ok!
IMEI: 352969041527458
Unlock Code #1: 3334346112707693
Unlock Code #2: 3165966874740095

For enter unlock code:
1. Power On phone without sim card
2. Type: 2945#*71001#
3. In lock menu type unlock code

من بعد دلك قم باشعال الهاتف دون بطاقة السيم ادخل 2945#*71001#

من بعد دلك ادخل رمز القفل الاول مرتين مبروك عليك الهاتف

[sami2007]

مشكور على موضوع

[seffari]

بارك الله فيك

[ahmed-mosaad]

ياريت ارجو ارجو التعريب

[ABOUSALMA007]

ياريت ارجو ارجو التعريب

If you are LG GW300 users and have a problem with it ( software problem ) like Auto Shutdown AKA Restarting, Hanging or stuck, now you can repair it for free.
Ok, let startded..,


Tools & Materials

1. Original Usb data cable, compatible with Nokia CA-101 Usb data cable
2. Software updater / flasher ( GSMMULTI V3.0 ). click here to downlod
3. LG GW300 Firmware click here to download

Step by Step

1. Download & Extract LG GW300 Flasher
2. Execute / Install SETUP_GSMULTI_V30, and then C:\GSMULTI folder will be created
3. Find MultiGSM_V30.exe on C:\GSMULTI folder, then right click, send to desktop
4. Execute / Install Setup_USB_PortMapping_04.exe, and the result will be stored in C:\GSMULTI\UsbDrivers\MTK
5. Connect phone ( in power off condition ) to PC via Usb data cable, wait until detected by PC
6. When PC asking for driver, go to C:\GSMULTI\UsbDrivers\MTK, wait until driver installed
7. Open MultiGSM_V30.exe ( at desktop ), go to Tab Setting ==> Configuration. For DLL, choose GW300_090625.dll at LG GW300 Flasher folder, for S/W file choose LG GW300 Firmware. For other setting don't changed
8. Final step.., just click on START button and wait untill all process done / pas

[ABOUSALMA007]

على ما اضن ليست به العربية

attention please!!!
phone hang,cant select right port....
here solution:
after install all drivers (phone continue to hang)
go to c: gsmulti,open USBMap_V04.exe
choose MTK(ADI)
press MAPPING START
connect phone whit usb(off mode)
wait the phone hang and u see phone connect by USB or maybe another one but phone be recognized
open flasher and start.
all done.

[bourahla1921]

جزاك الله خيرا كلام 100/100 انا ايضا قمت بفك الشيفرة بنفس الطريقة و نجحت جزاك الله خيرا على المعلومة

[hamada176]

بارك الله فيك

[ABOUSALMA007]

الله ابارك فيكم اخواني

[bil34]

بارك الله فيك حبيبي