.gif)
ازالة قفل ال FRP لجهاز SM-G930FD بكيبل UART
السلام عليكم
في البدء نحول الجهاز لوضعية ال DOWNLOAD MODE
ونربطه بكيبل USB ثم نعمل RESEET FRP سيطلب منا البوكس استخدام كيبل ال UART مع الظغط على زري التشغيل وخفض الصوت
Welcome to Octoplus/Octopus Box Samsung software version 2.5.8-----------------------------------------------------------------------------------
To connect SM-G925F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
To connect SM-G930FD phone you have to perform the following
steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G930FD
Please put the phone into Download Mode and connect USB cable.
Waiting for phone...
Reading PIT...
PIT was read successfully.
Searching for UART interface.. COM80
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP / Reactivation lock is successfully reseted!
Performed by 2.5.8 Software version.
.gif)
.gif)
المفضلات