طلب فلاشة Galaxy core prime G360h mt6572 بيهنج على اللوقو

[noure30]

طلب فلاشة Galaxy core prime G360h mt6572 بيهنج على اللوقو

>Operation:
1. Power off the phone.
2. Please insert USB cable within 20 seconds.
>>Analysis of USB port,Please insert phone USB cable.
>>Connecting...
>>CPU TYPE:MT6572
>>Hardware version:CA01
>>Software version:0000
>>SecCfgVal :0x00000000
>>BromVersion :0xFF
>>BLVersion :0x01
>>Boot downloading complete!
>>EMMC_ID:0x90014A2058494E594812A14565678F1F
>>EMMC_PRODUCT_NAME: SAMSUNG :0x2058494E5948
>>EMMC_BOOT1_SIZE: 0x00200000
>>EMMC_BOOT2_SIZE: 0x00200000
>>EMMC_PRMB_SIZE: 0x00200000
>>EMMC_GP1_SIZE: 0x00000000
>>EMMC_GP2_SIZE: 0x00000000
>>EMMC_GP3_SIZE: 0x00000000
>>EMMC_GP4_SIZE: 0x00000000
>>EMMC_USER_SIZE: 0x0E7000000(3.61 G)
>>
>>
>>
>>Analysis of system files...
>>PRELOADER:>>addr:0x000000 --length:0x600000
>>MBR:>>addr:0x600000 --length:0x080000
>>EBR1:>>addr:0x680000 --length:0x080000
>>PRO_INFO:>>addr:0x700000 --length:0x300000
>>NVRAM:>>addr:0xA00000 --length:0x500000
>>PROTECT_F:>>addr:0xF00000 --length:0xA00000
>>PROTECT_S:>>addr:0x1900000 --length:0xA00000
>>SECCFG:>>addr:0x2300000 --length:0x020000
>>UBOOT:>>addr:0x2320000 --length:0x060000
>>BOOTIMG:>>addr:0x2380000 --length:0x600000
>>RECOVERY:>>addr:0x2980000 --length:0x600000
>>SEC_RO:>>addr:0x2F80000 --length:0x040000
>>MISC:>>addr:0x2FC0000 --length:0x080000
>>LOGO:>>addr:0x3040000 --length:0x300000
>>EXPDB:>>addr:0x3340000 --length:0xA00000
>>ANDROID:>>addr:0x3D40000 --length:0x28A00000
>>CACHE:>>addr:0x2C740000 --length:0x17800000
>>USRDATA:>>addr:0x43F40000 --length:0xA21C0000
>>BMTPOOL:>>addr:0xFFFF00A8 --length:0x1500000
>>
>>
>>>>Format addr:0x43F40000 --Format length:0xA21C0000
>>

[MOHAMED*GSM]

اخى اسحب الفلاشة الاول وجرب الفلاشة رقم 2 فى الموضوع دة
https://www.gem-flash.com/vb/showthread.php?t=422828

[noure30]

بارك الله فيك ... للأسف عند مجاولة تفليش ملف الأندرويد بيصير خطأ في التفليش
manufacturer:samsung
1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Waiting for USB Port...
Set Miracle PreLoader USB VCOM (Android) (COM4)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6572 SW:0000 Ver: CA01
Downloading Boot8 ...
EMMC Size: 0x00E7000000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
Writing(Nand/eMMC)...
Writing ANDROID
>>Write error code: 0000

[noure30]

و هذا لوغ على الـــ NCK

----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) HYNIX 0x2058494e5948
EMMC FW VERSION: 12:00:00:00:00:00:00:00
EMMC CID: 90014A2058494E : 000000000000000000
EMMC UA SIZE: 0xe7000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe7600000 [3.615 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM6)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Download firmware to flash now...
Error: S_DA_SDMMC_WRITE_FAILED
All done.