Spreadtrum v1.10
World First Alcatel "Pixi First" SC7731 : Repair/FW/Servic
Identify
كود PHP:
SLDR Load Ok
BB CPU : SC7731
SC7731 Alcatel
For disable SLDR - select PAC or other SLDR or re-select CPU in settings tab!
Operation : Check/Read Info [ v1.10 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 35 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Alcatel eMMC Loader
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FLASH : eMMC Flash , Structure : Ok!
Reading extended info ...
Model Name : ALCATEL_ONETOUCH_4024D
Model Brand : TCL
Model Device: ALCATEL_ONETOUCH_4024D
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_18045
CompileDate : 1442825396
Project Ver : 4024D_RU_AL_V1.8_150921
Model Ext : 4024D
ExtraInfo : HWInfo not exists, normal phone
ExtraInfo : GSM Phone
Elapsed: 00:00:13
Reconnect Power/Cable!
Repair Security
كود PHP:
Operation : Repair Security [ v1.10 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 35 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Alcatel eMMC Loader
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!
Write new security data :
IMEI1 : 999923232323234
IMEI2 : 999945445454548
Step #1 Ok
Step #2 Ok
Step #3 Ok
Write done!
Elapsed: 00:00:18
Reconnect Power/Cable!
Read Firmware Just REAL, FULL , COMPLETE and WORKING firmware, which allow revive phones from ANY state
كود PHP:
Operation : Read FullFlash [ v1.10 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 35 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Alcatel eMMC Loader
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!
Phone found! [ 35 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Alcatel eMMC Loader
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : ALCATEL_ONETOUCH_4024D
Model Brand : TCL
Model Device: ALCATEL_ONETOUCH_4024D
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_18045
Project Ver : 4024D_RU_AL_V1.8_150921
Model Ext : 4024D
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img
Firmware Size : 1242 MiB
Saved to : E:\SP7731GEA_18045_ALCATEL_ONETOUCH_4024D_4.4.2_4024D_RU_AL_V1.8_150921\
Done!
Elapsed: 00:11:00
Reconnect Power/Cable!
Flash FW :
3 Minutes for get a result
كود PHP:
Infinity SC Firmware Detected
FW Size : 1242 MiB
Load Ok!
Operation : Flash [ v1.10 ]
======= Flash
Files set for flashing :
[ MCU ] : SC77xx Infinity Package
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 35 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Alcatel eMMC Loader
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
PMTManager : Load 0x18 records
PMTManager : PMT Update Ok!
Flashing now
Update BootCode : u-boot-spl-16k.bin
Write Data ...
Write Data Ok!
Update BootCode : u-boot.bin
Erase block ...
Block erase Ok!
Write Data ...
Write Data Ok!
Write FSImage : prodnv.img
Write Data ...
Write Data Ok!
Write CodeData : sc7731g_CP0_modem.bin
Write Data ...
Write Data Ok!
Write CodeData : DSP_DM_Gx.bin
Write Data ...
Write Data Ok!
Erase Block : RuntimeData
Erase block ...
Block erase Ok!
Erase Block : RuntimeData
Erase block ...
Block erase Ok!
Write CodeData : sc7731g_modem_CP2_WCN_14E_W15.31.1_Release.bin
Write Data ...
Write Data Ok!
Erase Block : RuntimeData
Erase block ...
Block erase Ok!
Erase Block : RuntimeData
Erase block ...
Block erase Ok!
Write CodeData : logo_480x800.bin
Write Data ...
Write Data Ok!
Write CodeData : fblogo_480x800.bin
Write Data ...
Write Data Ok!
Write CodeData : boot.img
Write Data ...
Write Data Ok!
Write FSImage : system.img
Write Data ...
Write Data Ok!
Write FSImage : cache.img
Write Data ...
FSImage : Make and Flush SPImage
Write Data Ok!
Write CodeData : recovery.img
Write Data ...
Write Data Ok!
Process : Flush
Flush Ok!
Write FSImage : userdata.img
Write Data ...
FSImage : Make and Flush SPImage
Write Data Ok!
Erase Block : INTERNALSD
Erase block ...
Block erase Ok!
Elapsed: 00:02:58
Reconnect Power/Cable!
Forensic : PatternLock Read
12 seconds for whole process from press button to get result
كود PHP:
Operation : Read PatternLock [ v1.10 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 35 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Alcatel eMMC Loader
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!
FlashMode Set : Ok!
Reading PatternLock ...
Read Ok , decrypt
PatternLock Sequence : 124789
Done!
Elapsed: 00:00:12
Forensic : PhoneBook Recovery
كود PHP:
Operation : Read PhoneBook [ v1.10 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 35 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Alcatel eMMC Loader
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!
Mount : /data
Size : 0x000000005DBFB000
Step #1
Step #2
Read Ok, PhoneBook records extracted : 6
TXT Saved to : C:\InfinityBox\CM2SPD\phdata\SPD_Pixi_PhoneBook.txt
Write : 6
CSV Saved to : C:\InfinityBox\CM2SPD\phdata\SPD_Pixi_PhoneBook.csv
Write : 6
VCF Saved to : C:\InfinityBox\CM2SPD\phdata\SPD_Pixi_PhoneBook.vcf
Write : 6
VCFv3 Saved to : C:\InfinityBox\CM2SPD\phdata\SPD_Pixi_PhoneBook_v3.vcf
Elapsed: 00:00:20
Format FS/Reset Settings
كود PHP:
Settings : SmartFormat is On
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 35 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Alcatel eMMC Loader
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!
eMMC phone detected! Will use 'Safe Format' mode!
Mount : /data
Size : 0x000000005DBFB000
State : 0x0001
Mount : /cache
Size : 0x0000000009600000
State : 0x0001
Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!
Done!
Elapsed: 00:00:19
Reconnect Power/Cable!
قريبا __ World First Alcatel "Pixi First" SC7731 : Repair/FW/Servic
.gif)
.gif)
المفضلات