الرجاء المساعدة البكس لا يقرأ معلومات اي هاتف توصل به و يعطي هذا علما اي جديد في استخدام البوكس
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
Available Ports:COM16 COM35 COM37 COM43
Current Port:COM43
Available Ports:COM16 COM35 COM37 COM43
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: null
Analyzing Rx and Tx...
Some mobile phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
Failed to detect.
Pinouts are not fonud!
Please drag D+ into the pinouts, and then continues to detect!
For many phones, charge pins need to be set in order to identify USB devices.
Detecting D+ and D-...
Vcc: null
Gnd: null
Detection initiated...
Failed to detect.
Setting pinouts...
Pinout setting complete.
Detecting rx and tx...
Vcc: null
Gnd: null
Detection initiated, connect the phone and power on it...
Some mobile phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
Failed to detect.
Please drag D+ into the pinouts, and then continues to detect!
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: null
Analyzing Rx and Tx...
Some mobile phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
Failed to detect.
Pinouts are not fonud!
Please drag D+ into the pinouts, and then continues to detect!
Please drag D+ into the pinouts, and then continues to detect!
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: null
Analyzing Rx and Tx...
Some mobile phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
Connection failed,connect again!
Connection failed,connect again!
Failed to detect.
Pinouts are not fonud!
please detect pinouts and defined pinouts first.
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: null
Analyzing Rx and Tx...
For this phone only read info and reset user code active.
For "Read Info" button , select phone modem or use rj45 cable.
Connection failed,connect again!
Some mobile phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
Failed to detect.
>>Pinouts are not fonud!
المفضلات