مشكله في تفليش نوكيا 105 الهاتف ميت


على بوكس السيلوك وعلى كراك البيست ياخد الفلاش كامل ولكن يقلع ( لايشتغل) ولايعطي الانفو

السيكلون

كود:
Pre-flash tasks finished
Checking rm908_02.700...
Flash file sorted Okay.
1 file(s) embedded into image.
Booting X-Gold via ASC (press power-on if used non-battery cable)...
X-Gold: Ready, MCU ID: 0x3400
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Default_RAM_Bootloader
[EBL] : Ready
Setting Baudrate to 921600bps...
Baudrate Accepted (921600bps)
Flash Chip 0x00EF6017, Unknown, Size: 8MBytes
Processing "hw_b1_rm908_02.700.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x00800000-0x00A0FFFF...
Flashing at 0x00800000...
Flashed 2162688 bytes OK
Erasing 0x00C60000-0x00EAFFFF...
Flashing at 0x00C60000...
Flashed 2232896 bytes OK
Erasing 0x00FFC000-0x00FFFFFF...
Flashing at 0x00FFC000...
Flashed 64 bytes OK
Box VPP disabled
Checking rm908_nai02.70ij...
Flash file sorted Okay.
1 file(s) embedded into image.
Booting X-Gold via ASC (press power-on if used non-battery cable)...
X-Gold: Ready, MCU ID: 0x3400
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Default_RAM_Bootloader
[EBL] : Ready
Setting Baudrate to 921600bps...
Baudrate Accepted (921600bps)
Flash Chip 0x00EF6017, Unknown, Size: 8MBytes
Processing "hw_b1_rm908_nai02.70ij.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x00EB0000-0x00F7FFFF...
Flashing at 0x00EB0000...
Flashed 418240 bytes OK
Box VPP disabled
Checking rm908_002.70ic...
Flash file sorted Okay.
1 file(s) embedded into image.
Booting X-Gold via ASC (press power-on if used non-battery cable)...
X-Gold: Ready, MCU ID: 0x3400
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Default_RAM_Bootloader
[EBL] : Ready
Setting Baudrate to 921600bps...
Baudrate Accepted (921600bps)
Flash Chip 0x00EF6017, Unknown, Size: 8MBytes
Processing "hw_f31_rm908_002.70ic.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x00210000-0x0045FFFF...
Flashing at 0x00210000...
Flashed 1622400 bytes OK
على كراك البيست

كود:
Selected FlashSettings : Manual
Files Set for Flashing :
MCU : rm908_02.700
PPM : rm908_002.70ic
CNT : rm908_nai02.70ij

Infineon flashing...
Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
PBL : Dynamic
Boot Ok , 01AB
SBL : Dynamic
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
EPP CFG [Bering]...
FLASH ID : 00EF000000176000
FLASH ID : UNKNOW [Not In Base]
Boot Done!

   ===Flashing [MCU]===
File : rm908_02.700
Image : hw_b1_rm908_02.700.fls
Cert block found, sending....
Cert sent
Found 3 region(s)
Processing Region 1/3
Erase , Start : 0x00800000 , Len : 0x00210000
Erasing, wait ... 
Erase done
Write , Start : 0x00800000 , Len : 0x00210000
Flashing , wait ...
Region flash done
Processing Region 2/3
Erase , Start : 0x00C60000 , Len : 0x00250000
Erasing, wait ... 
Erase done
Write , Start : 0x00C60000 , Len : 0x00221240
Flashing , wait ...
Region flash done
Processing Region 3/3
Erase , Start : 0x00FFC000 , Len : 0x00004000
Erasing, wait ... 
Erase done
Write , Start : 0x00FFC000 , Len : 0x00000040
Flashing , wait ...
Region flash done
Check : A59F
   ===Flashing [PPM]===
File : rm908_002.70ic
Image : hw_f31_rm908_002.70ic.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x00210000 , Len : 0x00250000
Erasing, wait ... 
Erase done
Write , Start : 0x00210000 , Len : 0x0018C180
Flashing , wait ...
Region flash done
Check : 6C95
   ===Flashing [CNT]===
File : rm908_nai02.70ij
Image : hw_b1_rm908_nai02.70ij.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x00EB0000 , Len : 0x000D0000
Erasing, wait ... 
Erase done
Write , Start : 0x00EB0000 , Len : 0x000661C0
Flashing , wait ...
Region flash done
Check : A3FD

Flashing done, rebooting...
-> Infineon info : Do FullFactory Sets after flashing
Flashing Done!


Init Service mode... Wait...

Init service mode failed!
Try powerup phone manually and connect