دى بيانات الجهاز على البيست
:
Connect phone on selected interface...
Core : v1.64 , BB5XG FlashEngine : v4.2
Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : RM-504_40.0.003_prd.core.C00
PPM : RM-504_40.0.003_prd.rofs2.V05
CNT : RM-504_32.0.007_001_000_U002.uda.fpsx
APE : RM-504_40.0.003_C03_prd.rofs3
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000010000022600010006400C192101051105
CPU ID : RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 22D0000E7D800052D6FCF0BE17678C50F7A27B8B
ASIC MODE ID: 00
ROOT KEY HASH: B8C3ADECFC997FCD8081D3DEAF870B8C
ROM ID: 4B9B75103E691FF8
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing RAP3NAND ...
Processing PASUBTOC ...
Processing PAPUBKEYS...
Processing UPDAPP ...
Boot Done!
TIME : Boot time : 00:00:04
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL -> [2nd] changing...
ADL Server confirm flashmode!
RHASH : B8C3ADECFC997FCD8081D3DEAF870B8C
RPAKeys : F2B05364E563A348608C1C3C9E54FE42AAAA1ACF
Pr.Code : 0577068
IMEI : 358022031897335
ADL : Auth done...
=== SW Version Check ===
- > REFLASHING or UPGRADE
=== SW Version Check ===
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing RM-504_40.0.003_prd.core.C00
Found 5 areas to erase
Erasing area 0x00040000 - 0x00082FFF, NAND, CMT
Result: 0000
Erasing area 0x00083400 - 0x003FFFFF, NAND, CMT
Result: 0000
Erasing area 0x00400000 - 0x007FFFFF, NAND, CMT
Result: 0000
Erasing area 0x00800000 - 0x00D5FFFF, NAND, CMT
Result: 0000
Erasing area 0x00D60000 - 0x09E5FFFF, NAND, CMT
Result: 0000
Erase partition 0x0A
Partition erase Ok
Partitioning : Ok [5]
TIME : Erase time : 00:00:00
Write : Processing RM-504_40.0.003_prd.core.C00
Total 171 [171/0/0] blocks to write, writing...
CMT : Writing Hash CERT [ADA]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [RAP3NAND]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [SOS*UPDAPP]
CMT : Writing Hash CERT [SOS*ENO]
CMT : Writing Hash CERT [SOS*DSP0]
CMT : Writing Hash CERT [SOS*ISASW]
CMT : Writing Hash CERT [SOS+CORE]
CMT : Writing Hash CERT [SOS+ROFS1]
TIME : Write time : 00:00:11
MCU Write done
===Flashing [PPM]===
Erase : Processing RM-504_40.0.003_prd.rofs2.V05
Found 1 areas to erase
Erasing area 0x02FA0000 - 0x09D5FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-504_40.0.003_prd.rofs2.V05
Total 441 [441/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFS2]
TIME : Write time : 00:00:35
PPM Write done
===Flashing [CNT]===
Erase : Processing RM-504_32.0.007_001_000_U002.uda.fpsx
Found 1 areas to erase
Erasing area 0x09E60000 - 0x0F71FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-504_32.0.007_001_000_U002.uda.fpsx
Total 1 [1/0/0] blocks to write, writing...
TIME : Write time : 00:00:00
CNT Write done
===Flashing [APE]===
Erase : Processing RM-504_40.0.003_C03_prd.rofs3
Found 1 areas to erase
Erasing area 0x09D60000 - 0x09E5FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-504_40.0.003_C03_prd.rofs3
Total 4 [4/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFS3]
TIME : Write time : 00:00:00
APE Write done
=================
ADL : End flashing
ADL : Finalize...
Flashing done!
Total flash time : 00:00:48
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia 5530 XpressMusic
Software Info: V ICPR72_10w29_tube1 24-05-11 RM-504 (c) Nokia
IMEI: 358022031897335
Ape Version: V 40.0.003
Product code: 0577064
Checking...
SimLock status : SimLock Damaged!!!!!
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Battery voltage is enough for start
Set phone to Normal mode...
AfterFlash operations done ;D
Done!
Elapsed: 00:01:22
Connect phone on selected interface...
Read Uniq key data started...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
ASIC ID: 000000010000022600010006400C192101051105
CPU ID : RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB
PUBLIC ID: 22D0000E7D800052D6FCF0BE17678C50F7A27B8B
ROOT KEY HASH: B8C3ADECFC997FCD8081D3DEAF870B8C
Fetching data, wait...
- > Reinsert cable and battery, press powerOn button again
- > For X7, E7 - just waiting, near 1 minute
- > When BEST start Search Phone - Press PowerOn if needed
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000010000022600010006400C192101051105
CPU ID : RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 22D0000E7D800052D6FCF0BE17678C50F7A27B8B
ASIC MODE ID: 00
ROOT KEY HASH: B8C3ADECFC997FCD8081D3DEAF870B8C
ROM ID: 4B9B75103E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 12.8.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.5
Use URAPIDOv11_XSR15_alg.fg , Rev : 2.0 Ver : 12.8.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:00
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : F2B05364E563A348608C1C3C9E54FE42AAAA1ACF
CFL: Close_Session
Content: 000300000000050000000400000000
CFL: Reboot
Wait, reconneting...
rap= 22D0000E7D800052D6FCF0BE17678C50F7A27B8B
hash= B8C3ADECFC997FCD8081D3DEAF870B8C
key= 9D28C3577C04F56DDF45CDCBDC5FBC40979473F5
Key file updated...
Done!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Repair SL procedure started...
Phone Imei: 358022031897335
Key file exists, no need to read...
Operating mode is OK, no need change...
Writing SimLock Data... Error
Repair fail...! ( SL3 phone? )
Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock Damaged!!!!!
- > Do REPAIR SL if it SL2/SL phone, if SL3 - Help Only Backup Or RPL
Security status : Security is Ok
-----------------------
PA_SimLock Version :
PA_SL phone detected
Done!
ودى بيانات الجهاز على التيربو
Simlock Information
================================================
Unable to read SP Data..
SECURITY_TEST : PASSED
CMLA_KEY : ABSENT
SUPER_DONGLE_TEST : PASSED
================================================
SL1/SL2 Phone detected
================================================
PHONE_MODE : TEST
والواضح ان السيم لوك مش ظاهر
يعنى التليفون يجيب نوكيا ثم شاشه سمراء ثم شاشه بيضاء ويطفى ارجو حل يا حبايبى وعلى فكره السيريال سليم ارجو حل يا حبايبى
المفضلات