card found:
registered to:
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Reading Phone Info....
Connected phone - Nokia 110
Software ver : V 03.04 20-04-12 RM-827 (c) Nokia
IMEI 1 : 353257059723881
IMEI 2 : 353257059723899
PPM : V 03.04 20-04-12 RM-827 (c) Nokia M4
CNT : Content: m4_059N407 V 03.04 20-04-12 RM-827 (c) Nokia
Product SN : 26D4E84BI
Product code : 059N406
Base Prd.code: 059K3X3
Module code : 0205081
Long Prod.SN : 0
Hardware info=======
HWID : 2100
Batery: 5097 mV
CMT BT: 19b5-22012
LCDVer: TPO
Lock info ===========
IMEI : 353257059723881
IMEI spNet : 3A 35 52 07 95 27 83 08
IMEI svNet : 33 35 52 07 95 27 83 08 F2
Sl Conf : 001-01-00000000000
Sl Prof : 800000000004000-B
Sl Aux : 000B0000
Hw Sig : A0C4019F7F270590
Country : Test SIM (Open)
Operator : NOKIA (Open)
Lock info:
Block 1
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 2
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 3
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 4
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 5
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 6
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 7
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
CRT308 Backup Created
INFINEON : SuperDongle not exist (It is Ok)
CMLA Key status : Ok
SimLock status : Ok
Security status : Ok
PA_SimLock Version :
PA_SL30 (20 digit) phone detected...
User Code : 12345
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]
Done!
Phone disconected!
Connect phone on selected interface...
Core : v1.62 , BB5XG FlashEngine : v4.0
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : RM-684_20.0.004_prd.core.C00
PPM : RM-684_20.0.004_prd.rofs2.V08
PPM2 : RM-684_20.0.004_C05_prd.rofs3.fpsx
CNT : RM684_20.0.004_003_000_U001.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000010000022600010006400C192101051105
CPU ID : RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 082001029FB20052F7179B29B83016AF65F4957D
ASIC MODE ID: 00
ROOT KEY HASH: B8C3ADECFC997FCD8081D3DEAF870B8C
ROM ID: 4B9B75103E691FF8
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing RAP3NAND ...
Processing PASUBTOC ...
Processing PAPUBKEYS...
Processing UPDAPP ...
Boot Done!
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL -> [2nd] changing...
ADL Server confirm flashmode!
RHASH : B8C3ADECFC997FCD8081D3DEAF870B8C
RPAKeys : CA158EAEE7D8D7A5B2E4907CB6BD0A9C2794D992
Pr.Code : 059B6C2
IMEI : 357883048483570
ADL : Auth done...
=== SW Version Check ===
- > REFLASHING or UPGRADE
=== SW Version Check ===
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing RM-684_20.0.004_prd.core.C00
Found 5 areas to erase
Erasing area 0x00040000 - 0x00082FFF, NAND, CMT
Result: 0000
Erasing area 0x00083400 - 0x003FFFFF, NAND, CMT
Result: 0000
Erasing area 0x00400000 - 0x007FFFFF, NAND, CMT
Result: 0000
Erasing area 0x00800000 - 0x00D5FFFF, NAND, CMT
Result: 0000
Erasing area 0x00D60000 - 0x0A55FFFF, NAND, CMT
Result: 0000
Erase partition 0x0A
Partition erase Ok
Partitioning : Ok [5]
TIME : Erase time : 00:00:00
Write : Processing RM-684_20.0.004_prd.core.C00
Total 364 [364/0/0] blocks to write, writing...
CMT : Writing Hash CERT [ADA]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [RAP3NAND]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [SOS*UPDAPP]
CMT : Writing Hash CERT [SOS*ENO]
CMT : Writing Hash CERT [SOS*DSP0]
CMT : Writing Hash CERT [SOS*ISASW]
CMT : Writing Hash CERT [SOS+CORE]
CMT : Writing Hash CERT [SOS+ROFS1]
TIME : Write time : 00:00:24
MCU Write done
===Flashing [PPM]===
Erase : Processing RM-684_20.0.004_prd.rofs2.V08
Found 1 areas to erase
Erasing area 0x069A0000 - 0x0945FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-684_20.0.004_prd.rofs2.V08
Total 123 [123/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFS2]
TIME : Write time : 00:00:09
PPM Write done
===Flashing [PPM2]===
Erase : Processing RM-684_20.0.004_C05_prd.rofs3.fpsx
Found 1 areas to erase
Erasing area 0x09460000 - 0x0A55FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-684_20.0.004_C05_prd.rofs3.fpsx
Total 16 [16/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFS3]
TIME : Write time : 00:00:01
PPM Write done
===Flashing [CNT]===
Erase : Processing RM684_20.0.004_003_000_U001.uda.fpsx
Found 1 areas to erase
Erasing area 0x0A560000 - 0x0F47FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM684_20.0.004_003_000_U001.uda.fpsx
Total 49 [49/0/0] blocks to write, writing...
TIME : Write time : 00:00:04
CNT Write done
=================
ADL : End flashing
ADL : Finalize...
Flashing done!
Total flash time : 00:00:40
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia 5250
Software Info: V ICPR72_10w42.1 23-11-10 RM-684 (c) Nokia
IMEI: 357883048483570
Ape Version: V 20.0.004
Product code: 059B6C2
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
AfterFlash operations done ;D
Done!
Elapsed: 00:00:58
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Phone disconected!
Connect phone on selected interface...
Core : v1.62 , BB5XG FlashEngine : v4.0
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm237__07.21.mcusw
PPM : rm237__07.21.ppm_mea1
CNT : rm237__07.21.image_mea1
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Getting product info...
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response.
ASIC ID: 000000010000022600010006010C192101001101
CPU ID : RAP3Gv3 , Features : No any extended features
RAP_PUB: 0660010426127B5698CA0825AD641D4DF16095D9
CMT_ROOT: BAF3A9C3DBFA8454937DB77F2B8852B1
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing PASUBTOC...
TIME : Boot time : 00:00:05
-> Error while flashing...
Phone disconected!
Connect phone on selected interface...
Connect phone on selected interface...
UFS S/N 78409 boot - Ok
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Reading Phone Info....
Connected phone - Nokia 6120
Software ver : V 07.20 05-10-09 RM-243 (c) Nokia
IMEI : 359342037132480
Ape Ver : 07.20
APE Var : rofs_version_inforofx_version_info
APE ADSP: 256
DSP Ver : 06w41pb_08w28.0.3_rm243
APE Test: rm243_ENO_A_2009wk15v0.100
PPM :
CNT :
Product SN : MBM114540
Product code : 0550022
Base Prd.code: 0548116
Long Prod.SN : 0
Hardware info=======
HWID : 1102
Retu : 16
Tahvo : 22
Batery: 4526 mV
APE HW: 256
RF ic : 17141716
Lock info ===========
IMEI : 359342037132480
IMEI spNet :
IMEI svNet :
Conf key : 0000000000000000
Provider key : 2440700000000000
Country : Finland
Operator : NOKIA (Open)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7
LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
User Code : 12345
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]
Done!
المفضلات