nokia asha 311 rm-714 بعد التفليش contact service
nokia asha 311 rm-714 بعد التفليش contact service
Started Phone Security Analysis...
[Nokia USB Phonet]: Port opened OK!
MCU Version V 05.92
MCU Date 10-10-12
Product RM-714 (Nokia RM-714)
Manufacturer (c) Nokia
IMEI 354595056654438
Mastercode 4040513440
Reading Security Block...
Security block OK and saved to "RM-714_354595056654438_02052013_112217.SecurityBlock.PM"
Step 1 : Testing SIMLOCK
-- SIMLOCK PROBLEM --
Phone have failed SIMLOCK Test, that means Simlock Area is DAMAGED!
To repair simlock area, Select Unlock method : "RPL CALCULATION",
And then click DIRECT UNLOCK. SL Area will be re-formatted.
-- SIMLOCK PROBLEM --
Step 2 : Testing SECURITY
-- SECURITY PROBLEM --
Phone have failed SECURITY Test, that means Superdongle Area is DAMAGED!
To repair it, simply slick "SX4 Authorization / SD Repair" button.
After SX4/SD Repair, don't forget to write PM file with fields 1,309 (if SW don't do this automatically)
Additionaly, Checking HWC/CCC Certs...
Booting CMT...
[Nokia USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007400C192103032108
CMT_EM_ASIC_ID: 00001051
CMT_EM_ASIC_ID: 00001060
CMT_PUBLIC_ID: 5E430000FFFB3C4046986709F6455AF08756B4F0
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 3AB5DB70B45D23F1ADEEBB5734160706
CMT_BOOT_ROM_CRC: 2CAC45E2
CMT_SECURE_ROM_CRC: 3BC33C8B
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv21_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.11.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000131, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000131, ST, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
RAPUv21_XSR17_alg.fg, Type: Algorithm, Rev: 768.12.11.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: A3E0AA6F2F86410BA6D666BACF6186EEFBC82D28
APE Subsystem Not Found
HWC Looks OK!
CCC Looks OK!
Restarting MCU...
-- SECURITY PROBLEM --
[Nokia USB Phonet]: Port opened OK!
Step 3 : Analyzing Security Block
"5E430000FFFB3C4046986709F6455AF08756B4F0.C00031F7" Exists, That is good...
Checking SUPERDONGLE...
SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
Checking SIMLOCK...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking MCU&DSP TIMESTAMPS...
MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
Checking CMLA KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking ECC KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking DIV KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Analyze finished!
رد مع اقتباس
.gif)
المفضلات