======================================================
======================================================
BB5 MEEGO / HARMATTAN FLASHER
======================================================
======================================================
1. Turn OFF Phone and wait 10 Seconds...
2. Connect the USB Cable to the PHONE Micro USB Port
3. Connect the USB Cable to the PC USB Port
TIPS & INFORMATION:
1. To Turn OFF the Phone, PRESS and HOLD the POWER
button for at least 10 Seconds...
2. Battery Charging will still work on "DEAD" Phones.
3. Factory Reset will make Flashing 15 minutes longer
and it will Totally Erase the User Data and Remove
the Phone Lock + Security Code as well...
4. Skip ADL Chk will Cold Flash the Device.
======================================================
======================================================
Waiting For Phone on USB PORT/s...
REQUIRED MODE: BOOTROM MODE
Sending PRIMARY-BOOT: SUCCESSFUL!
Waiting For Phone on USB PORT/s...
REQUIRED MODE: BOOTROM MODE
Sending SECONDARY-BOOT: SUCCESSFUL!
Waiting For Phone on USB PORT/s...
REQUIRED MODE: BOOTLOADER MODE PHONET MODE
Battery Voltage Test: PASSED
Ready to Flash Images to Device...
=========================================
Processing Image: cert-sw
Processing Image: cmt-2nd
Processing Image: cmt-algo
Processing Image: cmt-mcusw
Processing Image: xloader
Processing Image: secondary
Processing Image: kernel
Processing Image: rootfs
ERROR: MEEGO Device Flashing Failed!
Booting/Flashing Failed...
Please Try Again...
المفضلات