السلام عليكم ورحمه الله وبركاته
جاني جهاز x2-00
العميل بيقول انه بيفتح ابيض ويفصل
طبعا تم عمل سوفت باخر فرجن علي البيست
ياخذ الملفات نظامي لاكن لايقبل ui seting
والكومبيوتر يفضل يرن usb ويفصل ويرن ويفصل
وفضل الجهاز زي ماهو
تم غسل البورده في الغساله تمام
والتهيت علي البروسيسور
الجهاز اشتغل لاكن كونتكت سيرفس
ومعايا باكب rpl+PM
حد عدي عليه العيب ده
وده اسكان علي المكس بوكس
MXKEY [MxKey Team HTI PLUS Flasher Interface 0], SN: C0871327
Using device: USB ROM and HTI, FW ver: 00.50, SN: 01005707
Connection status: EHCI:HUB::USB 2.00 (High-speed)
Driver: NMWCD, ver: 7.1.32.75
Module ver: 1.0.0.21151(13-07-2012), Library ver: 1.0.0.14214(25-10-2012)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
CMT SYSTEM ASIC ID: 000000000000000022000509200C0000 [BCM213x1 ver: 1.0]
CMT EM0 ID: 00005361
CMT PUBLIC ID: 00000000008E269B9EBAB9FC280165BDB96D8628
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E
CMT ROM ID: DE56D582BDDE7A3A
Loading CMT secondary boot code
SecondaryBoot: BCM21351_usb2nd.fg [BB5] version: 11.14.0 revision: 2.1 size: 0x3940
Supported Ids: 22000209200C0000, 2200020920030000, 22000509200C0000, 2200050920030000
eBB5ProtocolType: NEW
Secondary boot loaded.
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0020 0030 - 0000 0131 [ST NAND-1G] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage4: 0020 0030 - 0000 0131 [ST NAND-1G] type: FLASH,MuxOneNAND, asic:CMT
Suggested algorithm: XSR 1.6
Loading CMT update server data
Algorithm: BCM21351_XSR16_usbalg.fg [XSR 1.6] version: 11.14.0 revision: 2.1 size: 0x8FC7D
Supported Ids: 22000209200C0000, 2200020920030000, 22000509200C0000, 2200050920030000
Update server code loaded.
Waiting for USB device removal ...OK
Waiting for USB device arrival ...OK
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 355A8AF
FUR: Adding Asic CMT as client OK.
CMT PAPUBKEYS HASH: E9700989029D9E899915F781B1582048E042A738
Selected firmware certificate matched.
Original Imei: 35165705360908
Original Product code: 059F9D2
Bluetooth ID: 94007001C2EC
SIMLOCK PA identifier:
[0] PA_SIMLOC30
Reading CMT NPC (0x168 bytes).
Reading CMT VARIANT (0x0 bytes).
Reading CMT CCC (0x160 bytes).
Reading CMT HWC (0xD4 bytes).
Reading CMT R&D (0x0 bytes).
Reading CMT MDM_KEYS (0x0 bytes).
Reading CMT PARTNERC (0x0 bytes).
Waiting for USB device removal ...OK
Waiting for USB device arrival ...OK
Waiting for device boot up ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 355A8AF
Waiting for USB device removal ...
Device connected: nmwcdc\Nokia X2-00 USB Phonet, PORT_ID: 893F715
Verifying communication to device OK.
Phone type: RM-618 (Nokia X2-00)
SW version: V 08.35 09-01-12 RM-618 (c) Nokia
Imei plain: 35165705360908-9
Battery voltage: 3646 mV, current: 1 mA
Language Pack:
- not available.
SLPA ver[1]: PA_SL (15 digit NCK)
Camera config: NI00BC0000040A4E2000, ver: XXX.XXX
warning: DCC corrupted !
SIMLOCK invalid!
SUPERDONGLE_KEY[MX] seems to be valid
SECURITY_TEST failed!
SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted!
وده اسكان علي البيست
card found: S/N 4453:0122
registered to: waelkawasaki
Connect phone on selected interface...
Core : v1.60 , BB5XG FlashEngine : v3.9
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm618__08.35.mcusw
PPM : rm618__08.35.ppm_meaa
CNT : rm618__08.35.image_meaa_0595138
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000000000000022000509200C0000
CPU ID : BroadCom 21351 , Features : Dead-Test, USBRPL, FullUSB
EM0 ID: 00005361
PUBLIC ID: 00000000008E269B9EBAB9FC280165BDB96D8628
ASIC MODE ID: 00
ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E
ROM ID: DE56D582BDDE7A3A
Use BCM21351_usb2nd.fg , Rev : 2.1 Ver : 12.8.0
Processing RAWLOADER...
FLIC : 00300020
Req : XSR 1.6
Use BCM21351_XSR16_usbalg.fg , Rev : 2.1 Ver : 12.8.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : E9700989029D9E899915F781B1582048E042A738
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 351657053609089
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
RPL saved : c:\InfinityBox\BEST\Backup\Cert\351657053609089_CRT_2nd.rpl
=== SW Version Check ===
- > REFLASHING
=== SW Version Check ===
===Flashing [MCU]===
Erase : Processing rm618__08.35.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm618__08.35.mcusw
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [ISA+DYNSW]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [UPDAPP]
Total writen 511 blocks
TIME : Write time : 00:00:05
MCU Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000
===Flashing [PPM]===
Erase : Processing rm618__08.35.ppm_meaa
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm618__08.35.ppm_meaa
Total writen 101 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000
===Flashing [CNT]===
Erase : Processing rm618__08.35.image_meaa_0595138
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm618__08.35.image_meaa_0595138
Total writen 342 blocks
TIME : Write time : 00:00:03
CNT Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000
ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:12
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia X2-00
Software Info: V 08.35 09-01-12 RM-618 (c) Nokia
IMEI: 351657053609089
PPM version : V 08.35 09-01-12 RM-618 (c) Nokia MEA
Product code:
Checking...
SimLock status : SimLock Damaged!!!!!
Security status : Security Damaged!!!!!
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 39 certs
Data exist, skip certificate repair...
Battery voltage is enough for start
Set phone to Normal mode...
AfterFlash operations done ;D
Done!
Elapsed: 00:00:44
Connect phone on selected interface...
المفضلات