كود:
MXKEY [MxKey Team HTI PLUS Flasher Interface 4], SN: C0871617
Using device: USB ROM and HTI, FW ver: 00.50, SN: 010069D4
Connection status: OHCI:HUB::USB 1.10 (Full-speed)
Driver: NMWCD, ver: 7.1.32.75
Module ver: 1.0.0.21151(13-07-2012), Library ver: 1.0.0.14214(25-10-2012)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.46
EBL version: Quantum_Bootloader_10.46_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 00EC 3012 - 23280002 [Samsung ]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 35165405785578
IMEI_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
RPL saved to "D:\3.5\data\backup\XGOLD_35165405785578_back.RPL"
Processing file: rm702__07.53.mcusw
Downloading item CODE:rm702__07.53.mcusw_ebl_psi.fls, num block: 4, size: 28 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.359 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.359 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 1.484 s
Erasing area 0x40280000-0x41D3FFFE ...OK
Programming completed in 37.187 s
Checksum verified (0x17A7)
Processing file: rm702__07.53.ppm_m_a
Downloading item CUST:package_m_a.ppm_ebl_psi.fls, num block: 1, size: 4.02 MB
Erasing area 0x41DC0000-0x421C410E ...OK
Programming completed in 5.656 s
Checksum verified (0x2686)
Processing file: rm702__07.53.image_m_a_059D432
Downloading item CUST:package_m_a_059D432.image.fls, num block: 1, size: 12.38 MB
Erasing area 0x424C0000-0x43E1FFFE ...OK
Programming completed in 17.046 s
Checksum verified (0xB2A4)
Total time for flashing process(boot+erase+write) was 3 min 54.079 s
Waiting for USB device removal ...
Waiting for device boot up ...
Device connected: nmwcdc\Nokia C2-03 USB Phonet, PORT_ID: 180D6F5E
Verifying communication to device OK.
Phone type: RM-702 (C2-03)
SW version: V 07.53 22-05-12 RM-702 (c) Nokia
Imei plain: 35165405785578-4
Product code: 059D432
Battery voltage: 3709 mV, current: 96 mA
Cellular system: GSM
ASIC ID: 0x0000, type: 11
Ppm Id: M_A
Language Pack:
English,Dannish,Norwegian,Swedish
Camera config: 094B2F01008017, ver:
Imei net: 35165405785578
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10
CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000003000B
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
.gif)
فك رمز الحماية c2-03
رد مع اقتباس
رد: فك رمز الحماية c2-03
المفضلات