1280 قاطع باور

**hamada yousri** · 19-01-2013, 11:49 PM

معايا جهاز 1280 قاطع باور ولا يدخل تست مود ولا يعمل سكان ولا سيلف تست ولا اى حاجة قلشتو ودا لوج الفلاش بس فى الاخر بتظهر الرسالة دى وبرضو نفس المشكلة الجهاز ميت

كود:

MXKEY [MxKey Team HTI PLUS Flasher Interface 4], SN: C0871617
Using device: HTI, FW ver: 00.50, SN: 010069D4
Connection status: OHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0 
Module ver: 1.0.0.21151(13-07-2012), Library ver: 1.0.0.14214(25-10-2012)
Device synchronized.
CPU: XGOLD 110
 Using embedded SBL from MCU.
Sending EBL Loader ...OK
Sending EBL ...OK
Getting EBL Version ...
 Boot mode: 0xCC
 EBL version major/minor: 10.19
 EBL version: Default_RAM_Bootloader
Set baud rate to: 921.60 Kbit/s
Flash ID: 0020 88C0 - 23280003 [ST M58MWR064FU,64 Mbits]
CFI information:
 Flash settings: 0/1, size: 0x00800000
 2 Block regions:
  127 x 0x00010000 = 0x007F0000
  8 x 0x00002000 = 0x00010000
EBL ready !
Processing file: rm647_006.200
 Downloading item CODE:hw_b2_rm647_r06.200.fls, num block: 3, size: 3.99 MB
Erasing area 0x00800000-0x00A0FFFE ...OK
Programming completed in 42.000 s
Erasing area 0x00C60000-0x00E4D5BE ...OK
Programming completed in 38.016 s
Erasing area 0x00FFC000-0x00FFC03E ...OK
Programming completed in 0.141 s
Checksum verified (0x2602)
Processing file: rm647_006.20ic
 Downloading item CUST:hw_b2_rm647_006.20ic.fls, num block: 1, size: 1.25 MB
Erasing area 0x00210000-0x0034EABE ...OK
Programming completed in 24.047 s
Checksum verified (0xAF8E)
Processing file: rm6470_nai06.20ic
 Downloading item CUST:hw_b2_rm6470_nai06.20ic.fls, num block: 1, size: 313.89 KB
Erasing area 0x00EB0000-0x00EFDA7E ...OK
Programming completed in 6.078 s
Checksum verified (0xF547)
Total time for flashing process(boot+erase+write) was 3 min 3.688 s