قائمة الاعضاء المشار اليهم
النتائج 1 إلى 7 من 7

الموضوع: نوكيا x2-00 rm 618 contact service

  1. #1
    .: جيماوي جديد :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    Oct 2010
    المشاركات
    48
    الشكر
    0
    شُكر 5 فى 5 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    13

    افتراضي نوكيا x2-00 rm 618 contact service

    عندي نوكيا اكس 2 ار ام 618 بيقلع بعد اشراة النوكيا وبيطلع كونتاكت سيرفيس وبيطفي




  2. # ADS
    Circuit advertisement
    تاريخ التسجيل
    Always
    المشاركات
    Many
  • # ADS

    تاريخ التسجيل
    Always
    المشاركات
    Many


  • #2
    صديق المنتدى
    الصورة الرمزية KURDISTAN

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2008
    الدولة
    Iraq _ Arbil
    العمر
    30
    Phone
    S II
    المشاركات
    7,445
    الشكر
    8,896
    شُكر 16,421 فى 3,885 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    233

    افتراضي رد: نوكيا x2-00 rm 618 contact service

    ارفع رسالة الـ scan للهاتف

  • #3
    .: جيماوي جديد :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    Oct 2010
    المشاركات
    48
    الشكر
    0
    شُكر 5 فى 5 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    13

    افتراضي رد: نوكيا x2-00 rm 618 contact service

    card found: S/N 1C4F:0118
    registered to: greecesyria


    Connect phone on selected interface...


    Connect phone on selected interface...


    Core : v1.47 , FlashEngine : v1.5


    Selected FlashSettings : Manual
    Check FlashFiles, Please, wait...


    Files Set for Flashing :
    MCU : rm618__08.35.mcusw
    PPM : rm618__08.35.ppm_mi
    CNT : rm618__08.35.image_d_059F990
    Flashing phone now...
    Check files done...
    -> SWversion check skipped : Dead mode selected
    Dead Mode is Selected
    Waiting for USB device...
    --- Insert cable and charger or press phone's power button! ---
    Connection opened successfully
    Waiting for communication response...
    BootRom : 1st boot ok
    ASIC ID: 000000000000000022000509200C0000
    CPU ID : BroadCom 21351 , Features : Dead-Test, USBRPL, FullUSB
    EM0 ID: 00005361
    PUBLIC ID: 000000000030ADE3842E792E494004F04CDB8F32
    ASIC MODE ID: 00
    ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E
    ROM ID: DE56D582BDDE7A3A
    Use BCM21351_usb2nd.fg , Rev : 2.1 Ver : 12.8.0
    Processing RAWLOADER...
    FLIC : 00300020
    Req : XSR 1.6
    Use BCM21351_XSR16_usbalg.fg , Rev : 2.1 Ver : 12.8.0
    Processing PASUBTOC ...
    Processing ALG ...
    Boot Done!
    TIME : Boot time : 00:00:02
    Reopening the connection...
    Waiting for response: 30
    ADL: Check mode
    Select ASIC [C900]
    PAPUBkeys : E9700989029D9E899915F781B1582048E042A738
    ADL: phone is in flash mode


    Backup enabled, will read all certificates...
    Reading NPC certificate...
    IMEI : 355367049352804
    Reading CCC certificate...
    Reading HWC certificate...
    Reading R&D certificate...
    Reading VARIANT certificate...
    Reading PARTNERC certificate...
    Reading MDM_KEYS certificate...
    Cert Read done!


    NPC Certificate saved...
    CCC Certificate saved...
    HWC Certificate saved...


    RPL saved : c:\InfinityBox\BEST\Backup\Cert\355367049352804_CRT_2nd.rpl


    ===Flashing [MCU]===
    Erase : Processing rm618__08.35.mcusw
    Partitioning....
    Partitioning Ok...
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:00
    Write : Processing rm618__08.35.mcusw
    CMT: Writing Hash CERT [KEYS]
    CMT: Writing Hash CERT [PAPUBKEYS]
    CMT: Writing Hash CERT [PRIMAPP]
    CMT: Writing Hash CERT [PASUBTOC]
    CMT: Writing Hash CERT [ADA]
    CMT: Writing Hash CERT [RAP3NAND]
    CMT: Writing Hash CERT [ISA+DYNSW]
    CMT: Writing Hash CERT [MCUSW]
    CMT: Writing Hash CERT [MCUSW1]
    CMT: Writing Hash CERT [GENIO_INIT]
    CMT: Writing Hash CERT [UPDAPP]
    Total writen 511 blocks
    TIME : Write time : 00:00:07
    MCU Write done
    ADL: Request programm status
    NAND status : 00000000 / 00000000 / 00000000


    ===Flashing [PPM]===
    Erase : Processing rm618__08.35.ppm_mi
    Partitioning....
    Partitioning Ok...
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:00
    Write : Processing rm618__08.35.ppm_mi
    Total writen 115 blocks
    TIME : Write time : 00:00:01
    PPM Write done
    ADL: Request programm status
    NAND status : 00000000 / 00000000 / 00000000


    ===Flashing [CNT]===
    Erase : Processing rm618__08.35.image_d_059F990
    Partitioning....
    Partitioning Ok...
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:01
    Write : Processing rm618__08.35.image_d_059F990
    Total writen 346 blocks
    TIME : Write time : 00:00:05
    CNT Write done
    ADL: Request programm status
    NAND status : 00000000 / 00000000 / 00000000


    ADL: Close_Session
    Content: 000300000000000000000000000000
    ADL: Reboot


    Flashing done!
    Total flash time : 00:00:16
    Reboot phone now...


    Afterflash not selected, skip
    Done!


    Elapsed: 00:00:26
    Connect phone on selected interface...


    Phone found!
    Series 40 Device detected!
    read info... - Ok


    Phone disconected!


    Connect phone on selected interface...


    Phone found!
    Series 40 Device detected!
    read info... - Ok


    Phone disconected!


    Connect phone on selected interface...


    Phone found!
    Series 40 Device detected!
    read info... - Ok


    Reading Phone Info....
    Connected phone - Nokia X2-00
    Software ver : V 08.35 09-01-12 RM-618 (c) Nokia
    IMEI : 355367049352804
    PPM : V 08.35 09-01-12 RM-618 (c) Nokia MI
    CNT : Content: d_059F990 V 08.35 09-01-12 RM-618 (c) Nokia
    Product SN : DNQ309910
    Product code : 059C660
    Base Prd.code: 0591973
    Module code : 0204491
    Long Prod.SN : 0
    Hardware info=======
    HWID : 1000
    Batery: 3761 mV
    CMT BT: 2.31-SP2.31
    LCDVer: SEIKO
    Lock info ===========
    IMEI : 355367049352804
    IMEI spNet : 3A 55 63 07 94 53 82 00
    IMEI svNet : 33 55 63 07 94 53 82 40 F1


    Conf key : 0000000000000000
    Provider key : 2440700000000000
    Provider : AT&T;U.S.A. (3650)
    Counters : Key 0 [3] , Fbus 0 [10]
    Blocks : 7


    LOCK STATUS :
    =============================
    BLK : 1
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 2
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 3
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 4
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 5
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 6
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 7
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    =============================
    LOCKS : All Open
    =============================
    CRT308 Backup Created


    SDD key status : Ok
    SimLock status : Ok
    Security status : Damaged!!!!!
    PA_SL3 phone , SP_CODE_LEN : 15


    User Code : 12345
    MMC pwd : no any record found
    UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]


    Done!


    Phone disconected!


    Connect phone on selected interface...


    Phone found!
    Series 40 Device detected!
    read info... - Ok


    Phone disconected!


    Connect phone on selected interface...


    Connect phone on selected interface...


    Core : v1.47 , FlashEngine : v1.5


    Selected FlashSettings : Dead-Test
    Check FlashFiles, Please, wait...


    Files Set for Flashing :
    Flashing phone now...
    Check files done...
    -> SWversion check skipped : Dead mode selected
    Dead Mode is Selected
    Waiting for USB device...
    --- Insert cable and charger or press phone's power button! ---
    Connection opened successfully
    Waiting for communication response...
    BootRom : 1st boot ok
    ASIC ID: 000000000000000022000509200C0000
    CPU ID : BroadCom 21351 , Features : Dead-Test, USBRPL, FullUSB
    EM0 ID: 00005361
    PUBLIC ID: 000000000030ADE3842E792E494004F04CDB8F32
    ASIC MODE ID: 00
    ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E
    ROM ID: DE56D582BDDE7A3A
    Use BCM21351_usb2nd.fg , Rev : 2.1 Ver : 12.8.0
    Processing RAWLOADER...
    FLIC : 00300020
    Req : XSR 1.6
    Use BCM21351_XSR16_usbalg.fg , Rev : 2.1 Ver : 12.8.0
    Processing PASUBTOC ...
    Processing ALG ...
    Boot Done!
    TIME : Boot time : 00:00:01
    Reopening the connection...
    Waiting for response: 30
    ADL: Check mode
    Select ASIC [C900]
    PAPUBkeys : E9700989029D9E899915F781B1582048E042A738
    ADL: phone is in flash mode


    Backup enabled, will read all certificates...
    Reading NPC certificate...
    IMEI : 355367049352804
    Reading CCC certificate...
    Reading HWC certificate...
    Reading R&D certificate...
    Reading VARIANT certificate...
    Reading PARTNERC certificate...
    Reading MDM_KEYS certificate...
    Cert Read done!


    NPC Certificate saved...
    CCC Certificate saved...
    HWC Certificate saved...


    RPL saved : c:\InfinityBox\BEST\Backup\Cert\355367049352804_CRT_2nd.rpl


    ADL: Close_Session
    Content: 000300000000000000000000000000
    ADL: Reboot


    Flashing done!
    Total flash time : 00:00:00
    Reboot phone now...


    Afterflash not selected, skip
    Done!


    Elapsed: 00:00:16
    Connect phone on selected interface...


    Phone found!
    Series 40 Device detected!
    read info... - Ok


    Core : v1.47 , FlashEngine : v1.5


    Selected FlashSettings : FullFlash
    Check FlashFiles, Please, wait...


    Files Set for Flashing :
    MCU : rm618__04.90.mcusw
    PPM : rm618__04.90.ppm_meaa
    CNT : rm618__04.90.image_meaa
    Flashing phone now...
    Check files done...
    -> SWversion check skipped : Manual mode selected
    Backup CRT308 data...
    CRT308 Backup Created
    SLx Simlock Data read ... ok
    SL3 Simlock Sign read ... ok
    WMDRM read ... ok
    Check communication with phone....
    ADL req restart
    Communication verify done... Preparing...
    Gathering phone info...
    Check communication with phone...
    Batery valtage : 3780 mV
    -> Batery voltage less, than 3,8V (3780mV). Continue at user risk
    -> Downgrade attempt detected
    -> Continue by user request...
    Reboot....
    Connection opened successfully
    Waiting for communication response...
    BootRom : 1st boot ok
    ASIC ID: 000000000000000022000509200C0000
    CPU ID : BroadCom 21351 , Features : Dead-Test, USBRPL, FullUSB
    EM0 ID: 00005361
    PUBLIC ID: 000000000030ADE3842E792E494004F04CDB8F32
    ASIC MODE ID: 00
    ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E
    ROM ID: DE56D582BDDE7A3A
    Use BCM21351_usb2nd.fg , Rev : 2.1 Ver : 12.8.0
    Processing RAWLOADER...
    FLIC : 00300020
    Req : XSR 1.6
    Use BCM21351_XSR16_usbalg.fg , Rev : 2.1 Ver : 12.8.0
    Processing PASUBTOC ...
    Processing ALG ...
    Boot Done!
    TIME : Boot time : 00:00:01
    Reopening the connection...
    Waiting for response: 30
    ADL: Check mode
    Select ASIC [C900]
    PAPUBkeys : E9700989029D9E899915F781B1582048E042A738
    ADL: phone is in flash mode


    Backup enabled, will read all certificates...
    Reading NPC certificate...
    IMEI : 355367049352804
    Reading CCC certificate...
    Reading HWC certificate...
    Reading R&D certificate...
    Reading VARIANT certificate...
    Reading PARTNERC certificate...
    Reading MDM_KEYS certificate...
    Cert Read done!


    NPC Certificate saved...
    CCC Certificate saved...
    HWC Certificate saved...
    SimLock Data saved...
    SimLock Key saved...
    WMDRM_PD Data saved...


    RPL saved : c:\InfinityBox\BEST\Backup\Cert\355367049352804_2nd.rpl


    ===Flashing [MCU]===
    Erase : Processing rm618__04.90.mcusw
    Partitioning....
    Partitioning Ok...
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:00
    Write : Processing rm618__04.90.mcusw
    CMT: Writing Hash CERT [KEYS]
    CMT: Writing Hash CERT [PAPUBKEYS]
    CMT: Writing Hash CERT [PRIMAPP]
    CMT: Writing Hash CERT [PASUBTOC]
    CMT: Writing Hash CERT [ADA]
    CMT: Writing Hash CERT [RAP3NAND]
    CMT: Writing Hash CERT [ISA+DYNSW]
    CMT: Writing Hash CERT [MCUSW]
    CMT: Writing Hash CERT [MCUSW1]
    CMT: Writing Hash CERT [GENIO_INIT]
    CMT: Writing Hash CERT [UPDAPP]
    Total writen 506 blocks
    TIME : Write time : 00:00:07
    MCU Write done
    ADL: Request programm status
    NAND status : 00000000 / 00000000 / 00000000


    ===Flashing [PPM]===
    Erase : Processing rm618__04.90.ppm_meaa
    Partitioning....
    Partitioning Ok...
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:00
    Write : Processing rm618__04.90.ppm_meaa
    Total writen 101 blocks
    TIME : Write time : 00:00:01
    PPM Write done
    ADL: Request programm status
    NAND status : 00000000 / 00000000 / 00000000


    ===Flashing [CNT]===
    Erase : Processing rm618__04.90.image_meaa
    Partitioning....
    Partitioning Ok...
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:01
    Write : Processing rm618__04.90.image_meaa
    Total writen 300 blocks
    TIME : Write time : 00:00:04
    CNT Write done
    ADL: Request programm status
    NAND status : 00000000 / 00000000 / 00000000


    ADL: Close_Session
    Content: 000300000000000000000000000000
    ADL: Reboot


    Flashing done!
    Total flash time : 00:00:16
    Reboot phone now...


    Reading Phone Info....
    Connected phone - Nokia X2-00
    Software Info: V 04.90 28-09-10 RM-618 (c) Nokia
    IMEI: 355367049352804
    PPM version : V 04.90 28-09-10 RM-618 (c) Nokia MEA
    Product code: 059C660
    Checking...
    SimLock status : SimLock is Ok
    Security status : Security Damaged!!!!!
    Read Info Done!
    Settings After Flash Defaults...
    ProductTuneSet...OK!
    SwUpgradeSet...OK!
    Connect phone on selected interface...


    Phone found!
    Series 40 Device detected!
    read info... - Ok


    Reading Phone Info....
    Connected phone - Nokia X2-00
    Software ver : V 04.90 28-09-10 RM-618 (c) Nokia
    IMEI : 355367049352804
    PPM : V 04.90 28-09-10 RM-618 (c) Nokia MEA
    CNT : Content: meaa_059B6F3 V 04.90 28-09-10 RM-618 (c) Nokia
    Product SN : DNQ309910
    Product code : 059C660
    Base Prd.code: 0591973
    Module code : 0204491
    Long Prod.SN : 0
    Hardware info=======
    HWID : 1000
    Batery: 3780 mV
    CMT BT: 2.31-SP2.31
    LCDVer: SEIKO
    Lock info ===========
    IMEI : 355367049352804
    IMEI spNet : 3A 55 63 07 94 53 82 00
    IMEI svNet : 33 55 63 07 94 53 82 20 F0


    Conf key : 0000000000000000
    Provider key : 2440700000000000
    Provider : AT&T;U.S.A. (3650)
    Counters : Key 0 [3] , Fbus 0 [10]
    Blocks : 7


    LOCK STATUS :
    =============================
    BLK : 1
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 2
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 3
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 4
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 5
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 6
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 7
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    =============================
    LOCKS : All Open
    =============================
    CRT308 Backup Created


    SDD key status : Ok
    SimLock status : Ok
    Security status : Damaged!!!!!
    PA_SL3 phone , SP_CODE_LEN : 15


    User Code : 12345
    MMC pwd : no any record found
    UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]


    Done!


    Phone disconected!


    Connect phone on selected interface...


    Phone found!
    Series 40 Device detected!
    read info... - Ok


    Phone disconected!


    Connect phone on selected interface...


    Phone found!
    Series 40 Device detected!
    read info... - Ok


    Reading Phone Info....
    Connected phone - Nokia X2-00
    Software ver : V 04.90 28-09-10 RM-618 (c) Nokia
    IMEI : 355367049352804
    PPM : V 04.90 28-09-10 RM-618 (c) Nokia MEA
    CNT : Content: meaa_059B6F3 V 04.90 28-09-10 RM-618 (c) Nokia
    Product SN : DNQ309910
    Product code : 059C660
    Base Prd.code: 0591973
    Module code : 0204491
    Long Prod.SN : 0
    Hardware info=======
    HWID : 1000
    Batery: 3771 mV
    CMT BT: 2.31-SP2.31
    LCDVer: SEIKO
    Lock info ===========
    IMEI : 355367049352804
    IMEI spNet : 3A 55 63 07 94 53 82 00
    IMEI svNet : 33 55 63 07 94 53 82 20 F0


    Conf key : 0000000000000000
    Provider key : 2440700000000000
    Provider : AT&T;U.S.A. (3650)
    Counters : Key 0 [3] , Fbus 0 [10]
    Blocks : 7


    LOCK STATUS :
    =============================
    BLK : 1
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 2
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 3
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 4
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 5
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 6
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 7
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    =============================
    LOCKS : All Open
    =============================
    CRT308 Backup Created


    SDD key status : Ok
    SimLock status : Ok
    Security status : Damaged!!!!!
    PA_SL3 phone , SP_CODE_LEN : 15


    User Code : 12345
    MMC pwd : no any record found
    UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]


    Done!


    Phone disconected!


    Connect phone on selected interface...


    Phone found!
    Series 40 Device detected!
    read info... - Ok


    Reading Phone Info....
    Connected phone - Nokia X2-00
    Software ver : V 04.90 28-09-10 RM-618 (c) Nokia
    IMEI : 355367049352804
    PPM : V 04.90 28-09-10 RM-618 (c) Nokia MEA
    CNT : Content: meaa_059B6F3 V 04.90 28-09-10 RM-618 (c) Nokia
    Product SN : DNQ309910
    Product code : 059C660
    Base Prd.code: 0591973
    Module code : 0204491
    Long Prod.SN : 0
    Hardware info=======
    HWID : 1000
    Batery: 3771 mV
    CMT BT: 2.31-SP2.31
    LCDVer: SEIKO
    Lock info ===========
    IMEI : 355367049352804
    IMEI spNet : 3A 55 63 07 94 53 82 00
    IMEI svNet : 33 55 63 07 94 53 82 20 F0


    Conf key : 0000000000000000
    Provider key : 2440700000000000
    Provider : AT&T;U.S.A. (3650)
    Counters : Key 0 [3] , Fbus 0 [10]
    Blocks : 7


    LOCK STATUS :
    =============================
    BLK : 1
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 2
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 3
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 4
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 5
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 6
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 7
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    =============================
    LOCKS : All Open
    =============================
    CRT308 Backup Created


    SDD key status : Ok
    SimLock status : Ok
    Security status : Damaged!!!!!
    PA_SL3 phone , SP_CODE_LEN : 15


    User Code : 12345
    MMC pwd : no any record found
    UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]


    Done!

  • #4
    .: جيماوي متالق :.
    الصورة الرمزية عمليق

    الحالة
    غير متواجد
    تاريخ التسجيل
    Dec 2010
    الدولة
    بلاد الرافدين
    العمر
    31
    Phone
    iPhone 4S 32Gb
    المشاركات
    1,525
    الشكر
    1,165
    شُكر 679 فى 423 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    33

    افتراضي رد: نوكيا x2-00 rm 618 contact service

    Security status : Damaged!!!!!
    حبيبي واضح من السكان عندك السيكيورتي تست مضروب
    اولا اسحب باك اب كامل من الجهاز للامان
    وبعدها قم بكتابة ملف pm 1&309 وان شاءالله تنحل المشكلة
    بالتوفيق

  • #5
    .:: Super Moderator ::.
    الصورة الرمزية MouAeD1989

    الحالة
    غير متواجد
    تاريخ التسجيل
    May 2007
    الدولة
    Syria - draa
    العمر
    27
    Phone
    G925F
    المشاركات
    9,414
    الشكر
    10,400
    شُكر 31,490 فى 5,293 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    71 مواضيع
    معدل تقييم المستوى
    591

    افتراضي رد: نوكيا x2-00 rm 618 contact service

    تم نقل الموضوع الى القسم الصحيح

  • #6
    .: جيماوي جديد :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    Oct 2010
    المشاركات
    48
    الشكر
    0
    شُكر 5 فى 5 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    13

    افتراضي رد: نوكيا x2-00 rm 618 contact service

    شكرا جزيلا اخي الكريم عالحل انا عم استخدم البيست بي بي فايف وين ممكن اكتب هاد الملف عالبيست بدي الخطوات ازا ممكن

  • #7
    .: جيماوي متالق :.
    الصورة الرمزية عمليق

    الحالة
    غير متواجد
    تاريخ التسجيل
    Dec 2010
    الدولة
    بلاد الرافدين
    العمر
    31
    Phone
    iPhone 4S 32Gb
    المشاركات
    1,525
    الشكر
    1,165
    شُكر 679 فى 423 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    33

    افتراضي رد: نوكيا x2-00 rm 618 contact service

    حبيبي اني جدا اسف لان ما استخدم البيست
    حاول تدخل على قسم البيست وتشوف كيفية التعامل مع الدونجل اكيد راح تلاقي الحل

  • الكلمات الدلالية لهذا الموضوع

    المفضلات

    المفضلات

    ضوابط المشاركة

    • لا تستطيع إضافة مواضيع جديدة
    • لا تستطيع الرد على المواضيع
    • لا تستطيع إرفاق ملفات
    • لا تستطيع تعديل مشاركاتك
    •